DOI: https://doi.org/10.9767/bcrec.18885

Green Synthesis of Cr-PTC-HIna Metal Organic Frameworks (MOFs) and Its Application in Methylene Blue Photocatalytic Degradation

1Department of Chemistry, Faculty of Science and Technology, UIN Syarif Hidayatullah Jakarta, Jl. Ir. H. Juanda No. 95, Ciputat, Tangerang Selatan 15412, Indonesia

2Integrated Laboratory Centre, Faculty of Science and Technology, UIN Syarif Hidayatullah Jakarta, Jl. Ir. H. Juanda No. 95, Ciputat, Tangerang Selatan 15412, Indonesia

3Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Indonesia, Jl. Lingkar Kampus Raya, Pondok Cina, Beji, Depok, Jawa Barat 16424, Indonesia

Received: 18 Jun 2023; Revised: 13 Aug 2023; Accepted: 14 Aug 2023; Available online: 18 Aug 2023; Published: 15 Oct 2023.
Editor(s): Istadi Istadi
Open Access Copyright (c) 2023 by Authors, Published by BCREC Group
Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Fulltext View|Download

Citation Format:
Cover Image
Abstract

Metal Organic Framework (MOF) is a material that serves as a photocatalyst for decomposing methylene blue pollutant. MOF can be constructed using several kinds of synthetic methods. This study aims to determine the alternative efficient and eco-friendly synthesis method of isonicotinic acid-modulated chromium perylene 3,4,9,10-tetracharboxylate MOF (Cr-PTC-HIna) using solvothermal, hydrothermal, sonochemical, and mechanochemical methods. FTIR analysis revealed that Cr-PTC-HIna was successfully fabricated only by solvothermal, hydrothermal, and sonochemical methods, yielding 40.68%, 44.27%, and 46.50%. Cr-PTC-HIna-ST, Cr-PTC-HIna-HT, and Cr-PTC-HIna-SC have band gap energies of 2.02, 2.02, and 1.98 eV, respectively. Cr-PTC-HIna-HT and Cr-PTC-HIna-SC with irregular shapes form agglomerations. Cr-PTC-HIna-SC had the highest surface area, pore volume, and pore size of 92.76 m2.g−1, 0.3947cm3.g−1, and 142.74 nm, respectively. Cr-PTC-HIna-SC has the highest percentage of methylene blue decolorization through adsorption of 61.843% and photocatalytic degradation of 25.635%. Sonochemical and hydrothermal showed potential as more eco-friendly methods than solvothermal in synthesizing Cr-PTC-HIna MOF. Copyright © 2023 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

 

Keywords: Hydrothermal; mechanochemical; MOF Cr-PTC-HIna; solvothermal; sonochemical
Funding: UIN Syarif Hidayatullah Jakarta under contract contract number B-301/LP2MPUSLITPEN/TL.02/2023

Article Metrics:

Article Info
Section: Original Research Articles
Language : EN
Recent articles
Organic Wastewater Treatment using Two-dimensional Graphene-based Photocatalysts: A Review Advancements in the Exploration of Gel Electrolytes for Aqueous Zinc Ion Batteries Synthesis, Structural Characterization and Photocatalytic CO2 Reduction Activity of a New Gd(III) Coordination Polymer with 6-Phenylpyridine-2-carboxylic acid and 4,4’-Bipyridine Ligands Xylene Isomerization using Hierarchically Mesoporous ZSM-5 Biochar-Modified Layered Double Hydroxide for Highly Efficient on Phenol Adsorption Frontmatter (Front Cover, Editorial Team, Indexing, and Table of Contents) Backmatter (Publication Ethics, Copyright Transfer Agreement for Publishing Form) More recent articles
  1. Bayomie, O.S., Kandeel, H., Shoeib, T., Yang, H., Youssef, N., El-Sayed, M.M.H. (2020). Novel approach for effective removal of methylene blue dye from water using fava bean peel waste. Scientific Reports, 10, 7824. DOI: 10.1038/s41598-020-64727-5
  2. Yagub, M.T., Sen, T.K., Afroze, S., Ang, H.M. (2014). Dye and its removal from aqueous solution by adsorption: A review. Advances in Colloid and Interface Science, 209, 172–184. DOI: 10.1016/j.cis.2014.04.002
  3. Cheng, Y.J., Wang, R., Wang, S., Xi, X.J., Ma, L.F., Zang, S.Q. (2018). Encapsulating [Mo3S13]2− clusters in cationic covalent organic frameworks: enhancing stability and recyclability by converting a homogeneous photocatalyst to a heterogeneous photocatalyst. Chemical Communications, 54, 13563–13566. DOI: 10.1039/C8CC07784C
  4. Velegraki, G., Miao, J., Drivas, C., Liu, B., Kennou, S., Armatas, G. (2018). Fabrication of 3D mesoporous networks of assembled CoO nanoparticles for efficient photocatalytic reduction of aqueous Cr(VI). Applied Catalysis B: Environmental, 221, 635–644. DOI: 10.1016/j.apcatb.2017.09.064
  5. Zhao, N., Sun, F., Zhang, N., Zhu, G. (2017). Novel pyrene-based anionic metal-organic framework for efficient organic dye elimination. Crystal Growth & Design, 17, 2453–2457. DOI: 10.1021/acs.cgd.6b01864
  6. Kumar, P.S., Selvakumar, M., Babu, S.G., Karuthapandian, S. (2016). Veteran cupric oxide with new morphology and modified bandgap for superior photocatalytic activity against different kinds of organic contaminants (acidic, azo and triphenylmethane dyes). Materials Research Bulletin, 83, 522–533. DOI: 10.1016/j.materresbull.2016.06.043
  7. Mahmoodi, N.M. (2015). Manganese ferrite nanoparticle: synthesis, characterization, and photocatalytic dye degradation ability. Desalination and Water Treatment, 53, 84–90. DOI: 10.1080/19443994.2013.834519
  8. Nageri, M., Kalarivalappil, V., Vijayan, B.K., Kumar, V. (2016). Titania nanotube arrays surface-modified with ZnO for enhanced photocatalytic applications. Materials Research Bulletin, 77, 35–40. DOI: 10.1016/j.materresbull.2016.01.020
  9. Astuti, Y., Musthafa, F., Arnelli, A., Nurhasanah, I. (2022). French fries-like bismuth oxide: physicochemical properties, electrical conductivity and photocatalytic activity. Bulletin of Chemical Reaction Engineering & Catalysis, 17(1), 146–156. DOI: 10.9767/bcrec.17.1.12554.146-156
  10. Astuti, Y., Amri, D., Widodo, D.S., Widiyandari, H., Balgis, B., Ogi, T. (2020). Effect of fuels on the physicochemical properties and photocatalytic activity of bismuth oxide, synthesized using solution combustion method. International Journal of Technology, 11(1), 26–36. DOI: 10.14716/ijtech.v11i1.3342
  11. Astuti, Y., Andianingrum, R., Arnelli, A., Haris, A., Darmawan, A. (2020). The role of H2C2O4 and Na2CO3 as precipitating agents on the physichochemical properties and photocatalytic activity of bismuth oxide. Open Chemistry, 18, 129–137. DOI: 10.1515/chem-2020-0013
  12. Habisreutinger, S.N., Schmidt-Mende, L., Stolarczyk, J.K. (2013). Photocatalytic reduction of CO2 on TiO2 and other semiconductors. Angewandte Chemie International Edition, 52, 7372–7408. DOI: 10.1002/anie.201207199
  13. Silva, C.G., Corma, A., García, H. (2010). Metal–organic frameworks as semiconductors. Journal of Materials Chemistry, 20, 3141–3156. DOI: 10.1039/B924937K
  14. Zulys, A., Adawiah, A., Gunlazuardi, J., Yudhi, M.D.L. (2021). Light-harvesting metal-organic frameworks (MOFs) La-PTC for photocatalytic dyes degradation. Bulletin of Chemical Reaction Engineering & Catalysis, 16, 170–178. DOI: 10.9767/bcrec.16.1.10309.170-178
  15. Araya, T., Jia, M., Yang, J., Zhao, P., Cai, K., Ma, W., Huang, Y. (2017). Resin modified MIL-53 (Fe) MOF for improvement of photocatalytic performance. Applied Catalysis B: Environmental, 203, 768–777. DOI: 10.1016/j.apcatb.2016.10.072
  16. Zhao, C., Jiang, H., Liang, Q., Zhou, M., Zhang, Y., Li, Z., Xu, S. (2020). NH2-UiO-66 with heterogeneous pores assists zinc indium sulfide in accelerating the photocatalytic H2 evolution under visible-light irradiation. Solar Energy, 207, 599–608. DOI: 10.1016/j.solener.2020.07.005
  17. Foster, M.E., Azoulay, J.D., Wong, B.M., Allendorf, M.D. (2014). Novel metal–organic framework linkers for light harvesting applications. Chemical Science, 5, 2081–2090. DOI: 10.1039/C4SC00333K
  18. Furukawa, H., Cordova, K.E., O’Keeffe, M., Yaghi, O.M. (2013). The chemistry and applications of metal-organic frameworks. Science, 341, 974–986. DOI: 10.1126/science.1230444
  19. Mahreni, M., Ristianingsih, Y. (2020). A review on metal-organic framework (MOF): synthesis and solid catalyst applications. In Proceeding of LPPM UPN “Veteran” Yogyakarta Conference Series 2020 – Engineering and Science, 1(1), 638–645
  20. Lee, Y.R., Jang, M.S., Cho, H.Y., Kwon, H.J., Kim, S., Ahn, W.S. (2015). ZIF-8: A comparison of synthesis methods. Chemical Engineering Journal, 271, 276–280. DOI: 10.1016/j.cej.2015.02.094
  21. Butova, V., Budnyk, A., Bulanova, E.A., Lamberti, C. (2017). Hydrothermal synthesis of high surface area ZIF-8 with minimal use of TEA. Solid State Sciences, 69, 13–21. DOI: 10.1016/j.solidstatesciences.2017.05.002
  22. Mohammed, W., Errayes, A. (2020). Green chemistry: principles, applications, and disadvantages. Chemical Methodologies, 4(4), 408–423. DOI: 10.33945/sami/chemm.2020.4.4
  23. Glowniak, S., Szczesniak, B., Choma, J., Jaroniec, M. (2021). Mechanochemistry: toward green synthesis of metal–organic frameworks. Materials Today, 46, 109–124. DOI: 10.1016/j.mattod.2021.01.008
  24. Liu, Y., Myers, E.J., Rydahl, S.A., Wang, X. (2019). ultrasonic-assisted synthesis, characterization, and application of a metal-organic framework: A green general chemistry laboratory project. Journal of Chemical Education, 96, 2286–2291. DOI: 10.1021/acs.jchemed.9b00267
  25. Soni, S., Bajpai, P.K., Arora, C. (2019) A review on metal-organic frameworks: synthesis, properties, and application. Characterization and Application of Nanomaterials, 3(2), 1–20. DOI: 10.24294/can.v2i2.551
  26. Adawiah, A., Oktavia, W., Saridewi, N., Azhar, F.M., Fitria, R.N., Gunawan, M.S., Komala, S., Zulys, A. (2021). Synthesis metal organic framework (MOFs) Cr-PTC-HIna modulated isonicotinic acid methylene blue photocatalytic degradation. Bulletin of Chemical Reaction Engineering & Catalysis, 17(2), 383–393. DOI: 10.9767/bcrec.17.2.13930.383-393
  27. Zhong, X., Huang, C., Chen, L., Yang, Q., Huang, Y. (2022). Effect of ultrasound on the kinetics of anti-solvent crystallization of sucrose. Ultrasonics Sonochemistry, 82, 105886. DOI: 10.1016/j.ultsonch.2021.105886
  28. Zhou, L., Wang, M., Yang, S., Guo, W., Pu, X., He, Y., Zhu, J., Wang, B., Zheng, M., Liu, S., Zhang, Y. (2022). Facile synthesis of mesoporous ZSM-5 aided by sonication and its application for VOCs capture. Ultrasonics Sonochemistry, 88, 106098. DOI: 10.1016/j.ultsonch.2022.106098
  29. Zeiger, B.W., Suslick, K.S. (2011). Sonofragmentation of molecular crystals. Journal of the American Chemical Society, 133(37), 14530–14533. DOI: 10.1021/ja205867f
  30. Pourebrahimi, S., Kazemeini, M. (2017). A kinetic study of facile fabrication of MIL-101 (Cr) metal-organic framework: effect of synthetic method. Inorganica Chimica Acta, 471, 513–520. DOI: 10.1016/j.ica.2017.11.033
  31. Jankulovska, M., Berger, T., Lana-Villarreal, T., Gómez, R. (2012). A comparison of quantum-sized anatase and rutile nanowire thin films: Devising differences in the electronic structure from photoelectrochemical measurements. Electrochimica Acta, 62, 172–180. DOI: 10.1016/j.electacta.2011.12.016
  32. Taheri, A., Babakhani, E.G., Towfighi, J. (2018). Study of synthesis parameters of MIL-53(Al) using experimental design methodology for CO2/CH4 separation. Adsorption Science & Technology, 36, 247–269. DOI: 10.1177/0263617416688690
  33. Kareem, H.M., Abd Alrubaye, R.T. (2019). Synthesis and characterization of metal organic frameworks for gas storage. IOP Conference Series: Materials Science and Engineering, 518, 062013. DOI: 10.1088/1757-899X/518/6/062013
  34. Ali, M.B., Maalam, K.E., Moussaoui, H.E., Mounkachi, O., Hamedoun, M., Masrour, R., Hlil, E.K., Benyoussef, A. (2015). Effect of zinc concentration on the structural and magnetic properties of mixed Co–Zn ferrites nanoparticles synthesized by sol/gel method. Journal of Magnetism and Magnetic Materials, 398, 20–25. DOI: 10.1016/j.jmmm.2015.08.097
  35. Smith, J.G. (2014). Organic Chemistry. 4th ed. New York: McGraw-Hill
  36. Israr, F., Chun, D., Kim, Y., Kim, D.K. (2016). High yield synthesis of Ni-BTC metal-organic framework with ultrasonic irradiation: role of polar aprotic DMF solvent. Ultrasonics Sonochemistry, 31, 93–101. DOI: 10.1016/j.ultsonch.2015.12.007
  37. Zhang, B., Zhang, J., Liu, C., Sang, X., Peng, L., Ma, X., Wu, T., Hana, B., Yanga, G. (2015). Solvent determines the formation and properties of metal-organic framework. RSC Advances, 5, 37691–37696. DOI: 10.1039/C5RA02440D
  38. Sharma, J., Vashishtha, M., Shah, D. (2014). Crystallite size dependence on structural parameters and photocatalytic activity of microemulsion mediated synthesized ZnO nanoparticles annealed at different temperatures. Global Journal of Science Frontier Research, 14(5), 19–32
  39. Pereira, F.L., Frós, A.C.O., Amorim, M.K.M., Hallwass, F., Almeida, L.C., Barros, B.S., Kulesza, J. (2020). Ultrasound irradiation effect on morphological and adsorptive properties of a nanoscale 3D Zn-coordination polymer and derived oxide. Ultrasonics Sonochemistry, 69, 105275. DOI: 10.1016/j.ultsonch.2020.105275
  40. Barros, B.S., Chojnacki, J., Soares, A.A.M., Kulesza, J., Luz, L.L., Júnior, S.A. (2015). Thermostability and photophysical properties of mixed-ligand carboxylate/benzimidazole Zn(II)-coordination polymers. Materials Chemistry and Physics, 162, 364–371. DOI: 10.1016/j.matchemphys.2015.05.079
  41. Liu, H., Hou, X., Li, X., Jiang, H., Tian, Z., Ali, M.K.A. (2020). Effect of mixing temperature, ultrasonication duration and nanoparticles/surfactant concentration on the dispersion performance of Al2O3 nanolubricants. Research Square, DOI: 10.21203/rs.3.rs-84466/v1
  42. Zarekarizi, F., Morsali, A. (2020). Ultrasonic-assisted synthesis of nano-sized metal-organic framework; a simple method to explore selective and fast congo red adsorption. Ultrasonics Sonochemistry, 69, 105246. DOI: 10.1016/j.ultsonch.2020.105246
  43. Wahiduzzaman, W., Allmond, K., Stone, J., Harp, S., Mujibur, K. (2017). Synthesis and electrospraying of nanoscale MOF (metal organic framework) for high-performance CO2 adsorption membrane. Nanoscale Research Letters, 12, 6. DOI: 10.1186/s11671-016-1798-6
  44. Abbasi, A.R., Rizvandi, M. (2018). Influence of the ultrasound-assisted synthesis of Cu–BTC metal–organic frameworks nanoparticles on uptake and release properties of rifampicin. Ultrasonics Sonochemistry, 40, 465–71. DOI: 10.1016/j.ultsonch.2017.07.041
  45. Nasrollahzadeh, M., Atarod, M., Sajjadi, M., Sajadi, S.M., Issabadi, Z. (2019). Plant-mediated green synthesis of nanostructures: mechanisms, characterization, and applications. Interface Science and Technology, 28, 199–322. DOI: 10.1016/B978-0-12-813586-0.00006-7
  46. Yu, K., Lee, Y.R., Seo, J.Y., Baek, K.Y., Chung, Y.M., Ahn, W.S. (2021). Sonochemical synthesis of Zr-based porphyrinic MOF-525 and MOF-545: Enhancement in catalytic and adsorption properties. Microporous and Mesoporous Materials, 316, 110985. DOI: 10.1016/j.micromeso.2021.110985
  47. Quan, X., Sun, Z., Meng, H., Han, Y., Wu, J., Xu, J., Xu, Y., Zhang, X. (2018). Polyethyleneimine (PEI) incorporated Cu-BTC composites: Extended applications in ultra-high efficient removal of congo red. Journal of Solid State Chemistry, 270, 231–241. DOI: 10.1016/j.jssc.2018.11.021
  48. Haleem, A., Shafiq, A., Chen, S.Q., Nazar, M. (2023). A comprehensive review on adsorption, photocatalytic and chemical degradation of dyes and nitro-compounds over different kinds of porous and composite materials. Molecules, 28, 1081. DOI: 10.3390/molecules28031081
  49. Blažeka, D., Car, J., Klobučar, N., Jurov, A., Zavašnik, J., Jagodar, A., Kovačević, E., Krstulović, N. (2020). Photodegradation of methylene blue and rhodamine B using laser-synthesized ZnO nanoparticles. Materials, 13, 4357. DOI: 10.3390/ma13194357
  50. Kudo, A., Miseki, Y. (2009). Heterogeneous photocatalyst materials for water splitting. Chemical Society Reviews, 38, 253–278. DOI: 10.1039/b800489g
  51. Xiao, J.D., Jiang, H.L. (2019). Metal-organic frameworks for photocatalysis and photothermal catalysis. Accounts of Chemical Research, 52, 356–366. DOI: 10.1021/acs.accounts.8b00521

Last update:

No citation recorded.

Last update:

No citation recorded.