Improved Stabilities of Immobilized Glucoamylase on Functionalized Mesoporous Silica Synthesised using Decane as Swelling Agent

Reni George; Sanjay Gopinath; Sankaran Sugunan

doi:10.9767/bcrec.8.1.4208.70-76

DOI: https://doi.org/10.9767/bcrec.8.1.4208.70-76

Improved Stabilities of Immobilized Glucoamylase on Functionalized Mesoporous Silica Synthesised using Decane as Swelling Agent

Reni George, Sanjay Gopinath, Sankaran Sugunan

Department of Applied Chemistry, Cochin University of Science and Technology, Kochi-682022, Kerala, India

Received: 3 Dec 2012; Revised: 4 Apr 2013; Accepted: 20 Apr 2013; Available online: 18 Jun 2013; Published: 30 Jun 2013.

Editor(s): Istadi Istadi

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Fulltext View|Download

BibTex Citation Data :

@article{BCREC19520,
    author = {Reni George and Sanjay Gopinath and Sankaran Sugunan},
    title = {Improved Stabilities of Immobilized Glucoamylase on Functionalized Mesoporous Silica Synthesised using Decane as Swelling Agent},
    journal = {Bulletin of Chemical Reaction Engineering & Catalysis},
  volume = {8},
    number = {1},
    year = {2013},
    keywords = {Mesoporous silica; Glucoamylase; Immobilization; Hydrothermal; Covalent bond},
    abstract = { Ordered mesoporous silica, with high porosity was used to immobilize glucoamylase via adsorption and covalent binding. Immobilization of glucoamylase within mesoporous silica was successfully achieved, resulting in catalytically high efficiency during starch hydrolysis. In this study, mesoporous silica was functionalized by co-condensation of tetraethoxysilane (TEOS) with organosilane (3-aminopropyl) triethoxysilane (APTES) in a wide range of molar ratios of APTES: TEOS in the presence of triblock copolymer P123 under acidic hydrothermal conditions. The prepared materials were characterized by Small angle XRD, Nitrogen adsorption – desorption and 29Si MAS solid state NMR. N2 desorption studies showed that pore size distribution decreases due to pore blockage after functionalization and enzyme immobilization. Small angle XRD and 29Si MAS NMR study reveals mesophase formation and Si environment of the materials. The main aim of our work was to study the catalytical activity, effect of pH, temperature storage stability and reusability of covalently bound glucoamylase on mesoporous silica support. The result shows that the stability of enzyme can be enhanced by immobilization.    © 2013 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (  https://creativecommons.org/licenses/by-sa/4.0  ) },
   issn = {1978-2993},   pages = {70--76}  doi = {10.9767/bcrec.8.1.4208.70-76},
    url = {https://journal.bcrec.id/index.php/bcrec/article/view/19520}
}

Citation Format:

Abstract

Ordered mesoporous silica, with high porosity was used to immobilize glucoamylase via adsorption and covalent binding. Immobilization of glucoamylase within mesoporous silica was successfully achieved, resulting in catalytically high efficiency during starch hydrolysis. In this study, mesoporous silica was functionalized by co-condensation of tetraethoxysilane (TEOS) with organosilane (3-aminopropyl) triethoxysilane (APTES) in a wide range of molar ratios of APTES: TEOS in the presence of triblock copolymer P123 under acidic hydrothermal conditions. The prepared materials were characterized by Small angle XRD, Nitrogen adsorption – desorption and 29Si MAS solid state NMR. N2 desorption studies showed that pore size distribution decreases due to pore blockage after functionalization and enzyme immobilization. Small angle XRD and 29Si MAS NMR study reveals mesophase formation and Si environment of the materials. The main aim of our work was to study the catalytical activity, effect of pH, temperature storage stability and reusability of covalently bound glucoamylase on mesoporous silica support. The result shows that the stability of enzyme can be enhanced by immobilization. © 2013 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0)

Keywords: Mesoporous silica; Glucoamylase; Immobilization; Hydrothermal; Covalent bond

Article Metrics:

Article Info

Section: Original Research Articles

Language : EN

In 2013: BCREC Volume 8 Issue 1 Year 2013 (June 2013)

Recent articles

Activities of Heterogeneous Acid-Base Catalysts for Fragrances Synthesis: A Review Short Review: Mitigation of Current Environmental Concerns from Methanol Synthesis Effective Production of Sorbitol and Mannitol from Sugars Catalyzed by Ni Nanoparticles Supported on Aluminium Hydroxide Synthesis and Characterization of High Aluminum Zeolite X from Technical Grade Materials Preparation and Characterization of Zeolite Membrane for Bioethanol Purification Frontmatter (Front Cover, Editorial Team, Indexing, and Table of Contents) Backmatter (Author Guideline, Publication Ethics, Copyright Transfer Agreement for Publishing Form) More recent articles

Sanjay, G., Sugunan, S. (2005). Glucoamylase immobilized on montmorillonite: Synthesis, characterization and starch hydrolysis activity in a fixed bed reactor. Catalysis Communications, 6: 525-530
Shankar, V., Nehete, P.N., Kothari, R.M. (1993). Immobilization of amyloglucosidase. Indian Journal of Biochemistry and Biophysics, 30: 62-70
Balasubramaniam, K., Arasartnam, V. (1989). Kinetic studies on soluble and immobilized alpha amylase and glucoamylase. Journal of National Science Council Srilanka, 17: 91-97
Gaoxiang, L., Jiayu, H., Xiufen, K. (1982). Glucoamylase covalently coupled to porous glass. Applied Biochemistry and Biotechnology, 7: 325-341
Huo, Y., Huang, J., Yuan, Z., Jiaxianhuang. (2004). Immobilization of glucoamylase onto novel porous polymer supports of vinylene carbonate and 2-hydroxyethyl methacrylate. Applied Biochemistry and Biotechnology.119: 121-131
Jayraju, K., Ayyanna, C., Padmasree, D. (1991). Indian Journal of Chemical Engineering, 33: 47-50
Chen ,Guo., Ma ,Yunhui., Su ,Pengfei., Fang , Baishan. (2012) Direct binding glucoamylase onto carboxyl-functioned magnetic nanoparticles. Biochemical Engineering Journal. 67:120-125
Zhao, G.H., Li, , Y.F, Wang, J.Z., Zhu, H. (2011). Reversible immobilization of glucoamylase onto magnetic chitosan nanocarriers. Applied Microbiology and Biotechnology, 91: 591–601
Wu, S.C., Lia, Y.K. (2008). Application of bacterial cellulose pellets in enzyme immobilization. Journal of Molecular Catalysis B: Enzymatic, 54: 103-108
Tardioli, P.W., Vieira, M.F., Vieira, A., Zanin, M., Betancor, G.M., Mateo, L., Fernández-Lorente, C., Guisán, G. (2011) Immobilization-stabilization of glucoamylase: Chemical modification of the enzyme surface followed by covalent attachment on highly activated glyoxyl-agarose supports. Journal of Molecular Process Biochemistry. 46: 409-412
Galina, A., Kovalenko, L., Perminova, V. (2008). Immobilization of glucoamylase by adsorption on carbon supports and its application for heterogeneous hydrolysis of dextrin. Carbohydrate Research, 343: 1202-1211
Cecilia, C., Batista, V., Ruales, F. (2011). Improved glucoamylase immobilization onto calcined chicken bone particles. Journal of Food Bioprocess Technology, 4: 1186-1196
Anna, W., Jersey, L., Teresa, B. (1990). Comparison of upper gastrointestinal toxicity of rofecoxib and naproxen in patients with rheumatoid arthritis. Journal of Chemical Technology and Biotechnology, 48: 287-300
Yu, K., He, J., Guo, X. (2007). Influence of Pore Diameters on the Immobilization of Lipase in SBA-15. Industrial & Engineering Chemistry Research, 46: 4474-4479
Hartmann, M., (2005). Ordered Mesoporous Materials for Bioadsorption and Biocatalysis. Chemistry of Materials, 17: 4577-4593
Pandya, P.H., Jasra, R.V., Newalkar, B.L., Bhatt, P.N. (2005). Studies on the activity and stability of immobilized α-amylase in ordered mesoporous silicas. Microporous Mesoporous Materials, 77: 67-77
Sing, K.S.W., Gregg, S.J. (1982). Adsorption Surface Area and Porosity. 2-nd ed. 80: 857-865
Zaho, D.Y., Feng, J.L., Huo, Q.S., Melosh, N., Fredrickson, G.H., Chmelka, B.F., Stucky, G.D. (1998). Nonionic triblock and star diblock copolymer and oligomeric surfactant syntheses of highly ordered, hydrothermally stable, mesoporous silica structures. Science 279: 548-552
Yu, C.Z, Fan, J., Tian, B.Z., Zaho, D.Y., Stucky, G.D. (2002). High-yield synthesis of periodic mesoporous silica rods and their replication to mesoporous carbon rods. Advanced Materials, 11: 1742-1745
Yang, H.F., Shi, Q.H., Tian, B.Z., Xie, S.H., Zhang, F.Q., Yan, Y., Tu, B., Zaho, D.Y. (2003). A fast way for preparing crack-free mesostructured silica monolith. Chemistry of Materials. 15: 536-541
Zaho, D.Y., Yang, P.D., Chmelka, B.F., Stucky, G.D. ( 1999). Multiphase assembly of mesoporous-macroporous membranes. Chemistry of Materials, 11: 1174-1178
Namba, S., Mochizuki, A. (1998). Effect of auxiliary chemicals on preparation of silica MCM-41. Research on Chemical Intermediates, 24: 561-570
Lei, C.H., Shin, Y.S., Liu, J., Ackerman, E.J. (2002). Entrapping enzyme in a functionalized nanoporous support. Journal of American Chemical Society, 124: 11242-11243
Ajayan, V., Kazi, Z.H., Katsuhiko, A. (2005). Recent advances in functionalization of mesoporous silica. Journal of Nanoscience and Nanotechnolog, 5: 347-371
Zaho, D., Huo, Q., Stucky, G.D. (1998). Nonionic triblock and star diblock copolymer and oligomeric surfactant syntheses of highly ordered, hydrothermally stable, mesoporoussilica structures. Journal of American Chemical Society, 120: 6024-6036
Lowry, O.H., Rosebrough, N.J., Farr, A.L., Randall, R.J. (1951). Protein measurement
with the Folin phenol reagent. Journal of Biological Chemistry, 193: 265-275
Hossein, N., Xiaojian, G.J. (2007). Characterization of sol-gel immobilized lipases. Sol-Gel Science and Technology, 41: 31-41
Zhao, G., Wang, J., Li, Y., Huang, H., Chen, X. (2012). Reversible immobilization of glucoamylase onto metal–ligand functionalized magnetic FeSBA-15. Biochemical Engineering Journal, 68: 159-166
Ashly, P.C., Mohanan, P.V. (2010). Preparation and characterization of Rhizopus amyloglucosidase immobilized on poly(o-toluidine). Process Biochemistry, 45: 1422-1426

Last update:

No citation recorded.

Last update:

No citation recorded.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Journal Author(s) Rights

In order for Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group to publish and disseminate research articles, we need non-exclusive publishing rights (transfered from author(s) to publisher). This is determined by a publishing agreement between the Author(s) and Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group. This agreement deals with the transfer or license of the right for publishing to Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group, while Authors still retain significant all copy rights to use and share their own published articles. Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group supports the need for authors to share, disseminate and maximize the impact of their research and these rights, in any databases.

As a journal Author, you have all copy rights for a large range of uses of your article, including use by your employing institute or company. These Author copy rights can be exercised without the need to obtain specific permission. Authors who publishing in BCREC journals have wide copy rights to use their works for teaching and scholarly purposes without needing to seek permission, including, but not limited to:

use for classroom teaching by Author or Author's institution and presentation at a meeting or conference and distributing copies to attendees;
use for internal training by author's company;
distribution to colleagues for their reseearch use;
use in a subsequent compilation of the author's works;
inclusion in a thesis or dissertation;
reuse of portions or extracts from the article in other works (with full acknowledgement of final article);
preparation of derivative works (other than commercial purposes) (with full acknowledgement of final article);
voluntary posting on open web sites operated by author or author’s institution for scholarly purposes,

(but it should follow the open access license of Creative Common CC-by-SA License).

Authors/Readers/Third Parties can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, even commercially, but they must give appropriate credit (the name of the creator and attribution parties (authors detail information), a copyright notice, an open access license notice, a disclaimer notice, and a link to the material), provide a link to the license, and indicate if changes were made (Publisher indicates the modification of the material (if any) and retain an indication of previous modifications using a CrossMark Policy and information about Erratum-Corrigendum notification).

Authors/Readers/Third Parties can read, print and download, redistribute or republish the article (e.g. display in a repository), translate the article, download for text and data mining purposes, reuse portions or extracts from the article in other works, sell or re-use for commercial purposes, remix, transform, or build upon the material, they must distribute their contributions under the same license as the original Creative Commons Attribution-ShareAlike (CC BY-SA).

Right Transfer Agreement for Publishing (RTAP)

The Authors submitting a manuscript do so on the understanding that if accepted for publication, non-exclusive right for publishing (publishing right) of the article shall be assigned/transferred to Publisher of Bulletin of Chemical Reaction Engineering & Catalysis journal (Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group).

Upon acceptance of an article, authors will be asked to complete a 'Right Transfer Agreement for Publishing (RTAP)'. An e-mail will be sent to the Corresponding Author confirming receipt of the manuscript together with a 'Right Transfer Agreement for Publishing' form by online version of this agreement.

Bulletin of Chemical Reaction Engineering & Catalysis journal and Masyarakat Katalis Indonesia-Indonesian Catalyst Society (MKICS), the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in the Bulletin of Chemical Reaction Engineering & Catalysis are sole and exclusive responsibility of their respective authors and advertisers.

Remember, even though we ask for a transfer of right for publishing (RTAP), our journal Author(s) still retain (or are granted back) significant scholarly copy rights as mentioned before.

The Right Transfer Agreement for Publishing (RTAP) Form can be downloaded here: [Right Transfer Agreement for Publishing (RTAP) Form BCREC 2025]

The copyright form should be signed electronically and send to the Editorial Office in the form of original e-mail below:

Prof. Dr. I. Istadi (Editor-in-Chief)
Editorial Office of Bulletin of Chemical Reaction Engineering & Catalysis
Laboratory of Plasma-Catalysis (R3.5), UPT Laboratorium Terpadu, Universitas Diponegoro
Jl. Prof. Soedarto, Semarang, Central Java, Indonesia 50275
Telp/Whatsapp: +62-81-316426342
E-mail: bcrec[at]live.undip.ac.id ; bcrec[at]che.undip.ac.id

(This policy statements has been updated at 24th January 2024)