1Department of Mechanical Engineering, Usmanu Danfodiyo University Sokoto, Nigeria
2Department of Chemical Engineering, Ahmadu Bello University Zaria, Nigeria, Nigeria
3Department of Food Science, Kaura Namoda Polytechnic, Zamfara State, Nigeria, Nigeria
BibTex Citation Data :
@article{JCERP20708, author = {Ismail Abubakar Jumare and Omuya Raheem Momoh and Sani Abubakar Jumare}, title = {Parametric Optimization of Solvent Extraction of Soybean Oil}, journal = {Journal of Chemical Engineering Research Progress}, volume = {0}, number = {0}, year = {2026}, keywords = {Optimization; Solvent extraction; Soxhlet apparatus; Soybean; Statistical analysis}, abstract = { Edible oil extraction via favorable conditions is central to industrial growth and sustainability. This paper investigates the optimum conditions for the soybean oil extraction via solid-liquid or leaching mechanism. This was done by varying parameters viz. the solvent concentration, temperature, and time of extraction using a soxhlet apparatus in a water bath. The oil characterization was also carried out focusing on some physic-chemical properties. Statistical analysis was lastly carried out on different parameters of the oil extraction in view of correlation or statistical significance test using Analysis of Variance (ANOVA). Results showed the highest percentage yield of the oil as 19.25 Wt. % with the optimum conditions being 180 minutes of extraction, 70 o C, and 300 ml n-hexane. The statistical significance evaluation showed F values of 6545.26, 63.07, 272.65, and 38.75 for soy cake weight loss with corresponding moisture content, variations in solvent extraction, temperature and time with their corresponding oil yields respectively, all greater than their critical F values. However, the F value determined for the sets of oil yield for the 3 parametric variations being 1.21, was found to be greater than its critical F value. Hence, these conditions will be useful in maximizing soybean oil production at best possible cost. Also, Statistical significant evidence exist from the robust data analysis to show clear relationship on all the tested parametric variations for the oil extraction with their corresponding oil yields. }, issn = {3032-7059}, pages = {3} doi = {10.9767/jcerp.20708}, url = {https://journal.bcrec.id/index.php/jcerp/article/view/20708} }
Refworks Citation Data :
Edible oil extraction via favorable conditions is central to industrial growth and sustainability. This paper investigates the optimum conditions for the soybean oil extraction via solid-liquid or leaching mechanism. This was done by varying parameters viz. the solvent concentration, temperature, and time of extraction using a soxhlet apparatus in a water bath. The oil characterization was also carried out focusing on some physic-chemical properties. Statistical analysis was lastly carried out on different parameters of the oil extraction in view of correlation or statistical significance test using Analysis of Variance (ANOVA). Results showed the highest percentage yield of the oil as 19.25 Wt. % with the optimum conditions being 180 minutes of extraction, 70oC, and 300 ml n-hexane. The statistical significance evaluation showed F values of 6545.26, 63.07, 272.65, and 38.75 for soy cake weight loss with corresponding moisture content, variations in solvent extraction, temperature and time with their corresponding oil yields respectively, all greater than their critical F values. However, the F value determined for the sets of oil yield for the 3 parametric variations being 1.21, was found to be greater than its critical F value. Hence, these conditions will be useful in maximizing soybean oil production at best possible cost. Also, Statistical significant evidence exist from the robust data analysis to show clear relationship on all the tested parametric variations for the oil extraction with their corresponding oil yields.
Article Metrics:
Last update:
Authors who publish in the Journal of Chemical Engineering Research Progress (JCERP) retain full copyright ownership of their work. In keeping with the journal’s commitment to open access, all articles are published under the terms of the Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0).
This license permits anyone to access, use, share, adapt, remix, transform, and build upon the work for any purpose, including commercial use, provided that appropriate credit is given to the original author or authors, a link to the license is provided, changes to the work (if any) are clearly indicated, and any derivative works are distributed under the same license.
Authors are encouraged to disseminate their work as widely as possible. They retain the right to reuse their published article in future scholarly works, such as books, conference presentations, or teaching materials. They may also deposit the final published version in institutional or subject-based repositories, and share it freely on personal websites, academic platforms, or professional networks. These rights are fully preserved under the CC BY-SA license, and all such uses must comply with its terms.
Readers and third parties may also use the content in accordance with the CC BY-SA license. This includes the ability to reproduce, modify, and build upon the article, even for commercial purposes, as long as proper attribution is given, and any resulting work is distributed under the same license.
License to Publish Agreement (Non-Exclusive License for Publishing Rights)
To enable publication and global dissemination of accepted manuscripts, the Journal of Chemical Engineering Research Progress is published by UPT Laboratorium Terpadu Universitas Diponegoro jointly with Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) Publisher, and the technical management of the JCERP journal is supported by with BCREC Publishing Group, requires that authors grant the publisher a non-exclusive license to publish the work. This license authorizes the publisher to reproduce, distribute, and communicate the article to the public in all forms and media. The license to publish does not transfer copyright; authors remain the sole copyright holders.
This arrangement is formalized through a License to Publish Agreement, which the corresponding author must complete after the manuscript is accepted for publication. The agreement confirms that the author or authors grant the publisher the non-exclusive right to publish the article and to distribute it under the Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0).
Authors retain all other rights to their work. They remain free to use and share their article in any manner consistent with the terms of the CC BY-SA license, including in future publications, educational settings, and commercial applications, provided proper attribution is given and the license is preserved.
After acceptance, the corresponding author will receive an email containing instructions for completing and electronically signing the License to Publish Agreement. The signed agreement must be returned to the Editorial Office in order to proceed with publication. The License to Publish Agreement form is available for download on the journal’s official website.
The non-exclusive Transfer Agreement for Publishing Right (CTAP) Form can be downloaded here: [Transfer Agreement for Publishing Right (CTAP) Form JCERP 2024]
The (non-exclusive) publishing right form should be signed electronically and send to the Editorial Office in the form of original e-mail below: Prof. Dr. I. Istadi (Editor-in-Chief)Editorial Office of Journal of Chemical Engineering Researc ProgressLaboratory of Plasma-Catalysis (R3.5), UPT Laboratorium Terpadu, Universitas DiponegoroJl. Prof. Soedarto, Semarang, Central Java, Indonesia 50275Telp/Whatsapp: +62-81-316426342E-mail: jcerp[at]live.undip.ac.id
(This policy statements has been updated at 25th March 2025)
View statistics
The Journal of Chemical Engineering Research Progress is published by UPT Laboratorium Terpadu Universitas Diponegoro jointly with Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) Publisher. The technical management of the JCERP journal is supported by with BCREC Publishing Group.
