DOI: https://doi.org/10.9767/jcerp.20589

Improved Conversion Performance in Methyl Chloride Production from Methanol and Hydrogen Chloride Through Heat Exchanger Based Waste Heat Recovery and Process Modification

Department of Chemical Engineering, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia

Received: 12 Dec 2025; Revised: 17 Dec 2025; Accepted: 18 Dec 2025; Available online: 31 Dec 2025; Published: 30 Jun 2026.
Editor(s): Istadi Istadi
Open Access Copyright (c) 2026 by Authors, Published by Universitas Diponegoro and BCREC Publishing Group
Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Fulltext View|Download

Citation Format:
Cover Image
Abstract

Methyl chloride (CH₃Cl) is an essential intermediate in the manufacture of silicones, agrochemicals, amines, refrigerants, and synthetic rubber; however, conventional production routes are constrained by substantial energy inefficiencies and exergy destruction. This study seeks to enhance the hydrochlorination of methanol to methyl chloride by integrating heat exchangers (HE) as a waste‑heat recovery strategy. Simulation software was used to simulate both the baseline and heat‑integrated process configurations, employing the Peng–Robinson EOS to represent thermodynamic behavior. In the baseline system, the process required 12,302.48 kW of energy input and produced 9,028.60 kW of useful output, achieving a conversion of 73.4%, with unrecovered hot streams contributing significantly to entropy generation. The modified configuration introduced three heat exchangers (E‑100, E‑101, E‑102) to recover reaction and condensation heat, enabling feed preheating and reducing external utility demand. This integration increased conversion from 73.4% to 95%, raised energy output to 11,912 kW, and reduced both energy losses and exergy destruction. The resulting dataset from the optimized system was subsequently evaluated using machine learning models, among which Bayesian Ridge Regression (BRR) demonstrated the highest accuracy and stability, exhibiting superior MSE, MAE, and R² performance. Overall, the findings show that coupling heat‑integration strategies with machine‑learning analysis provides a robust pathway for improving energy efficiency, product quality, and predictive reliability in methyl chloride production. Copyright © 2026 by Authors, Published by Universitas Diponegoro and BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Keywords: Methyl Cloride Production; Heat Exchanger Integration; Simulation Software; Conversion

Article Metrics:

Article Info
Section: Original Research Articles
Language : EN
Recent articles
Improving Product Purity of Ethylene Glycol Production from Ethylene Oxide by Modify Process Using Multi-stage Distillation Optimization of Operating Conditions for Enhanced Efficiency in Green Ammonia Production toward Sustainable Fertilizer Applications Minimizing Net Energy Consumption in Vinyl Chloride Monomer (VCM) Production using Heat-Integrated Process Design More recent articles
  1. Perry, R.H., Green, D.W., 1984, Chemical Engineers Handbook, Mc Graw Hill Book, New York
  2. Gollangi, R., Rao, K. (2022). Energetic, exergetic analysis and machine learning of methane chlorination process for methyl chloride production. Energy & Environment, 34(7), 2432-2453. DOI: 10.1177/0958305X221109604
  3. Dobbelaere, M.R., Plehiers, P.P., van de Vijver, R., Stevens, C.V., van Geem, K.M. (2021). Machine learning in chemical engineering: strengths, weaknesses, opportunities, and threats. Engineering, 7(9), 1201-1211. DOI: 10.1016/J.ENG.2021.03.019
  4. Kirk, R.E., Othmer, D.F., 1977, Encyclopedia of Chemical Technology. 3 ed.,Vol 1, John Wiley and Sons, New York
  5. Faith, W.L., Keyes, D.B., 1955, Industrial chemical, John Wiley and Sons, Inc., New York
  6. Ding, C., Zhang, X., Liang, G., Feng, J. (2024). Optimizing Exergy Efficiency in Integrated Energy System: A Planning Study Based on Industrial Waste Heat Recovery. IEEE Access. 12, 148074-148089. DOI: 10.1109/ACCESS.2024.3468291
  7. Ding, Y., Guo, Q., Guo, W., Chu, W., Wang, Q. (2024). Review of recent applications of heat pipe heat exchanger use for waste heat recovery. Energies, 17(11), 2504. DOI: 10.3390/en17112504
  8. Yandrapu, V.P., Kanidarapu, N.R. (2021). Process design for energy efficient, economically feasible, environmentally safe methyl chloride production process plant: Chlorination of methane route. Process Safety and Environmental Protection, 154, 360-371. DOI: 10.1016/j.psep.2021.08.027
  9. Iooss, B., Saltelli, A. (2017). Introduction to sensitivity analysis. In Handbook of uncertainty quantification (pp. 1103-1122). Springer, Cham
  10. Kalinina, I., Gozhyj, A., Bidyuk, P., Gozhyi, V., Korobchynskyi, M., Nadraga, V. (2024, June). A Systematic Approach to Data Normalization and Standardization in Machine Learning Problems. In International Scientific Conference “Intellectual Systems of Decision Making and Problem of Computational Intelligence” (pp. 206-219). Cham: Springer Nature Switzerland. DOI: 10.1007/978-3-031-88483-2_11
  11. Geng, Z., Li, H., Zhu, Q., Han, Y. (2018). Production prediction and energy-saving model based on Extreme Learning Machine integrated ISM-AHP: Application in complex chemical processes. Energy, 160, 898-909. DOI: 10.1016/j.energy.2018.07.077
  12. Karisma, M.N., Chusnul, M.W. (2021). Penentuan Konstanta Laju Reaksi Pembuatan Biocide (Methyl Chloride dengan ZnCl2 sebagai Reagen Penentuan Dichloro Dimethyl Paraquat. ChemPro, 2(3), 33-37. DOI: 10.33005/chempro.v2i03.106
  13. Rathoure, A.K., Ram, B.L.G.P., Aggarwal, S.G. (2019). Unit Operations in Chemical Industries. International Journal of Environmental Chemistry, 5(2), 11-29
  14. Kishore, R.A. (2018). Low-grade Thermal Energy Harvesting and Waste Heat Recovery. http://hdl.handle.net/10919/103650
  15. Khunt, P.B. (2025). Process modelling of amine unit for carbon capture in the context of the cement industry. Doctoral dissertation, Otto von Guericke University of Magdeburg. https://elib.dlr.de/216990/
  16. Alcantra-avila, J.R. (2023). 50 years of optimization in Japan Using Superstructures. Journal of Chemical Engineering of Japan, 56(1), 1-12. DOI: 10.1080/00219592.2023.2188112
  17. Wankhede, S., Lobo, R., Pesode, P. (2024). Evaluating machine learning algorithm for real-time heat exchanger optimization and automatic issue detection device: experimental analysis. International Journal on Interactive Design and Manufacturing (IJIDeM), 18(7), 4409-4420. DOI: 10.1007/s12008-023-01709-7
  18. Er-Ratby, M., Kobi, A., Sadraoui, Y., Kadiri, M.S. (2025). The Impact of Predictive Maintenance on the Performance of Industrial Enterprises. SN Computer Science, 6(1), 73. DOI: 10.1007/s42979-024-03599-2
  19. Alshahrani, N. (2024). Machine Learning Approaches for Predictive Maintenance in Industrial Operations. In 2024 IEEE 16th International Conference on Computational Intelligence and Communication Networks (CICN), Indore, India, 2024, pp. 365-372, DOI: 10.1109/CICN63059.2024.10847337

Last update:

No citation recorded.

Last update:

No citation recorded.