DOI: https://doi.org/10.9767/bcrec.20658

Comparative Evaluation of Fe-MOF, Cu-MOF, and Bimetallic Fe/Cu-MOF for Enhanced CO₂ Adsorption: Synthesis, Characterization, and Performance Analysis

Faculty of Chemical & Process Engineering Technology, Universiti Malaysia Pahang Al-Sultan Abdullah, Lebuh Persiaran Tun Khalil Yaakob, 26300 Kuantan, Malaysia

Received: 28 Jan 2026; Revised: 25 Feb 2026; Accepted: 26 Feb 2026; Available online: 12 Mar 2026; Published: 30 Aug 2026.
Editor(s): Istadi Istadi
Open Access Copyright (c) 2026 by Authors, Published by BCREC Publishing Group
Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Fulltext View|Download

Citation Format:
Cover Image
Abstract

Rising atmospheric CO₂ concentrations necessitate the development of efficient and economically viable carbon capture materials. Metal-organic frameworks (MOFs) offer strong potential due to their tunable pore structures and accessible metal sites. In this work, Fe-MOF, Cu-MOF, and bimetallic Fe/Cu-MOF were synthesized via a solvothermal route and systematically evaluated for CO₂ adsorption performance. The materials were characterized using SEM-EDX, FTIR, XRD, BET, and TGA to establish correlations between structural properties and adsorption behavior. CO₂ uptake was investigated under varying pressure (1-5 bar), adsorbent dosage (0.2-0.5 g), and temperature (40-50 °C). Among the three adsorbents, Fe/Cu-MOF exhibited the highest adsorption capacity, reaching 3.22 mg g-¹ at 5 bar, outperforming Fe-MOF (2.54 mg g-¹) and Cu-MOF (2.35 mg g-¹). Adsorption increased markedly with pressure, showed non-linear dependence on dosage due to site underutilization and diffusion limitations, and decreased with increasing temperature, indicating an exothermic physisorption-dominated process. BET analysis revealed that Fe/Cu-MOF possessed the highest surface area (19.4 m² g-¹) and pore volume (0.0489 cm³ g-¹), while XRD and FTIR confirmed successful incorporation of both metal centers, generating chemically heterogeneous adsorption sites. Kinetic analysis demonstrated that CO₂ uptake follows a pseudo-first-order model, consistent with surface-controlled physisorption. The enhanced performance of Fe/Cu-MOF is attributed to synergistic effects arising from dual-metal coordination, improved pore connectivity, and increased availability of active adsorption domains. These findings highlight the potential of bimetallic Fe/Cu-MOFs as promising candidates for pressurized CO₂ capture applications and provide insight into structure-performance relationships governing gas adsorption in defect-rich MOF systems.

Keywords: CO2 emission; Carbon capture; CO2 adsorption; Metal-Organic Frameworks adsorbents

Article Metrics:

Article Info
Section: 3rd International Symposium of Reaction Engineering, Catalysis and Sustainable Energy 2025 (RECASE 2025)
Language : EN
Recent articles
Efficient Adsorption of Tetracycline from Aqueous Solution onto Zinc Oxide Nanoparticles: Isotherm, Kinetic, Regeneration and Thermodynamic Studies Constructing the Active Sites of an Artificial Hydrolase Using Mercaptoethanol as a Destructive Agent Photocatalytic Activity of ZnO/Hydroxyapatite Nanocomposite for Remazol Red RB Removal in Aqueous Solution Under UV and Visible Light Irradiation Comparative Assessment of Empirical Coke Deposition Models during n-Butanol Dehydration over a Zeolite-Y-Based Cracking Catalyst Effect of Equimolar Sodium Borohydride-Ferric Chloride Concentrations on Nano Zero-Valent Iron/Palm Shell Composites for Simultaneous Nanogold Recovery and Hydrogen Generation Comparative Evaluation of Fe-MOF, Cu-MOF, and Bimetallic Fe/Cu-MOF for Enhanced CO₂ Adsorption: Synthesis, Characterization, and Performance Analysis More recent articles
  1. . Li, J. R., Sculley, J., & Zhou, H. C. (2012). Metal-Organic Frameworks for Separations. Chemical Reviews, 112(2), 869-932. DOI: https://doi.org/10.1021/cr200190s
  2. . Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T. H., & Long, J. R. (2012). Carbon Dioxide Capture in Metal-Organic Frameworks. Chemical Reviews, 112(2), 724-781. DOI: https://doi.org/10.1021/cr2003272
  3. . Zhou, H. C., Long, J. R., & Yaghi, O. M. (2012). Introduction to Metal-Organic Frameworks. Chemical Reviews, 112(2), 673-674. DOI: https://doi.org/10.1021/cr300014x
  4. . Liu, J., Wang, Y., Benin, A. I., Jakubczak, P., Lanuza, M., Willis, R. R., & LeVan, M. D. (2010). CO₂/H₂O Adsorption Equilibrium and Rates on Metal-Organic Frameworks: HKUST-1 and Ni/DOBDC. Langmuir, 26(20), 14301-14307. DOI: https://doi.org/10.1021/la102359q
  5. . Li, H., Xu, C., Li, N., Tao, R., Zhong, Z., Zhou, Q., Wang, C., Xu, S. & Tang, J. (2022). Synthesis of Bimetallic FeCu-MOF and Its Performance as Catalyst of Peroxymonosulfate for Degradation of Methylene Blue. Materials, 15(20), 1-16. DOI: DOI: https://doi.org/10.3390/ma15207252
  6. . Thi, C. Q. N., Thi, N. D. N., Hung, D. C. & Bich, N. H. (2023). Evaluation of the Effect of Bimetallic Organic Framework M/Fe-MOF (M=Ni, Co) on the Removal of Congo Red Dye. Polish Journal of Environmental Studies, 2(32), 2-10. DOI: https://doi.org/10.15244/pjoes/155874
  7. . Zeng, X., Zhang, G. & Zhu, J. (2022). Selective adsorption of heavy metals from water by a hyper-branched magnetic composite material: Characterization, performance, and mechanism. Journal of Environmental Management, 314, 114979. DOI: https://doi.org/10.1016/j.jenvman.2022.114979
  8. . Yang, X., Qin, J., Dai, Z., Sun, Y., Liu, H, Zheng, X. & Hu, Z. (2023). MOF-derived Fe based catalysts for efficiently Advanced Oxidation Processes: From single atoms to diatomic and nanoparticles. Progress in Natural Science: Materials International, 33(4), 534-543. DOI: https://doi.org/10.1016/j.pnsc.2023.10.002
  9. Elena, G. R., Jesús, T., Pedro, L., Carmen, M. & Gisela, O. (2025). Synergistic performance of novel Cu-MOF-74@SBA-15 material in enhanced CO2 adsorption and transformation. Journal of CO2 Utilization, 92, 103025. DOI: https://doi.org/10.1016/j.jcou.2025.103025
  10. Furukawa, H., Cordova, K. E., O'Keeffe, M., & Yaghi, O. M. (2013). The Chemistry and Applications of Metal-Organic Frameworks. Science, 341(6149), 1230444. DOI: https://doi.org/10.1126/science.1230444
  11. Xiao, J., Shiya, Y., Hengshuo, H., Shuyu, L., Wenfu, X., Min, L., Tianyu, Z. & Qiang, W. (2025). Regulation of Cu-MOF reconstruction for enhanced CO2 electroreduction. Applied Catalysis B: Environment and Energy, 375, 125412. DOI: https://doi.org/10.1016/j.apcatb.2025.125412
  12. . Mehrdad, H., Mohammad, R. & Federico, G. (2023). Synthesis and characterization of iron incoporated metal-organic framework (MOF) photocatalyst in degradation of methylene blue. Journal of Water and Environmental Nanotechnology, 8(1), 1-12. DOI: https://doi.org/10.22090/jwent.2023.08.001
  13. Keaoleboga, M., Mike, M., Guoming, W., Nicholas, M. M. & Henrietta, W. (2025). Recent advances in Fe-based metal-organic frameworks: Structural features, synthetic strategies and applications. Coordination Chemistry Reviews, 529, 216467. DOI: https://doi.org/10.1016/j.ccr.2025.216467
  14. Abid, H. S., Zain, U. A., Sumaira, M., Farzana, R., Rafi, U., Attiq, U. R., Muhammad, D., Manzoor, A., Kifayat, U., Muhammad, N. R. & Fei, T. (2023). Porous Cu-based metal organic framework (Cu-MOF) for highly selective adsorption of organic pollutants. Journal of Solid State Chemistry, 322, 123935. https://doi.org/10.1016/j.jssc.2023.123935
  15. Wang, F. X, Zhang, Z. W., Fei, W., Ya, L., Zhang, Z. C., Chong, C. W., Baoyi, Y., Xuedong, D., Peng, W., Huifen, F. & Chen, Z. (2023). Fe-Cu bimetal metal-organic framework for efficient decontamination via Fenton-like process: Synthesis, performance and mechanism. Journal of Colloid and Interface Science, 649, 384-393. DOI: https://doi.org/10.1016/j.jcis.2023.06.083
  16. Antía, F. S., Emilio, R., Marta, P. & Angeles, S. (2025). One-pot synthesis of bimetallic Fe-Cu metal-organic frameworks composite for the elimination of organic pollutants via peroxymonosulphate activation. Environmental Science and Pollution Research, 32, 10592-10607. DOI: https://doi.org/10.1016/j.jcis.2023.06.083
  17. Noor, K., Nadir, A., Honghai, Y., & Wang, J. (2024). Review of MOFs and their applications in the preparation of loose nanofiltration membranes for dye and salt fractionation. Desalination and Water Treatment, 317, 100092. DOI: https://doi.org/10.1016/j.dwt.2024.100092
  18. Keaoleboga, M., Mike, M., Guoming, W., Nicholas, M. M. & Henrietta, W. L. (2025). Recent advances in Fe-based metal-organic frameworks: Structural features, synthetic strategies and applications. Coordination Chemistry Reviews, 529, 216467. DOI: https://doi.org/10.1016/j.ccr.2025.216467
  19. Daud, N. K., Abas, F. N. & Najib, N. H. I. M. (2023). CO2 Adsorption Performance of AC and Zn-MOF for the application of Carbon Capture and Sequestration (CCS). Materials Today Proceeding, 1-7. DOI: https://doi.org/10.1016/j.matpr.2023.03.231
  20. Kaur, S., Rani, S., Mahajan, R. K., Asif, M. & Gupta, V. K. (2015). Synthesis and adsorption properties of mesoporous material for the removal of dye safranin: kinetics, equilibrium, and thermodynamics. Journal of Industrial and Engineering Chemistry, 22, 19–27. DOI: https://doi.org/10.1016/j.jiec.2014.06.019
  21. Loganathan, S., Tikmani, M., Edubilli, S., Mishra, A. & Ghoshal, A. K. (2014). CO2 adsorption kinetics on mesoporous silica under wide range of pressure and temperature. Chemical Engineering Journal, 256, 1–8. DOI: https://doi.org/10.1016/j.cej.2014.06.091
  22. Serna-Guerrero, R. & Sayari, A. (2010). Modeling adsorption of CO2 on amine-functionalized mesoporous silica. 2: kinetics and breakthrough curves. Chemical Engineering Journal, 161: 182–190. DOI: https://doi.org/10.1016/j.cej.2010.04.042
  23. Blanchard, M. M. G. & Martin, G. (1984). Removal of heavy metals from waters by means of natural zeolites, water. Water research, 18: 1501–1507. DOI: https://doi.org/10.1016/0043-1354(84)90124-6
  24. Avrami, M. (1939). Kinetics of phase change. I general theory. The Journal of Chemical Physics, 7, 1103–1112. DOI: https://doi.org/10.1063/1.1750380
  25. Wang, J. W., Stevens, L. A., Drage, T. C. & Wood, J. (2012). Preparation and CO2 adsorption of amine modified Mg-Al LDH via exfoliation route. Chemical Engineering Science, 68, 424–431. DOI: https://doi.org/10.1016/j.ces.2011.09.052
  26. Rao, N., Wang, M., Shang, Z. M., Hou, Y. W., Fan, G. Z., Li, J. F. (2018). CO2 adsorption by aminefunctionalized MCM-41: a comparison between impregnation and grafting modification methods. Energy Fuel, 32, 670–677. DOI: https://doi.org/10.1021/acs.energyfuels.7b02906
  27. Liu, F. L., Chen, S. X., Gao, Y. T. (2017). Synthesis of porous polymer based solid amine adsorbent: effect of pore size and amine loading on CO2 adsorption. Journal of Colloid and Interface Science, 506, 236–244. DOI: https://doi.org/10.1016/j.jcis.2017.07.049
  28. Vargas, A. M. M., Cazetta, A. L., Kunita, M. H., Silva, T. L., Almeida, V. C. (2011). Adsorption of methylene blue on activated carbon produced from flamboyant pods (Delonix regia): study of adsorption isotherms and kinetic models. Chemical Engineering Journal, 168, 722–730. DOI: https://doi.org/10.1016/j.cej.2011.01.067
  29. Liu, Y. M., Yu, X. J. (2018). Carbon dioxide adsorption properties and adsorption/desorption kinetics of amine-functionalized KIT-6. Applied Energy, 211, 1080–1088. DOI: https://doi.org/10.1016/j.apenergy.2017.12.016
  30. Volker, P., John, M., Yeon, S. H. & Yury, G. (2011). Effect of pore size on carbon dioxide sorption by carbide derived carbon. Energy & Environmental Science, 4(8), 3059-3066. DOI: https://doi.org/10.1039/C1EE01176F
  31. Ana, Y. A., Víctor, M. T., Marcos, J. E. S., Ilich, A. I., & Elí, S. G. (2024). Chemically Modified HKUST-1(Cu) for Gas Adsorption and Separation: Mixed-Metal and Hierarchical Porosity. ACS Applied Materials & Interfaces, 16(14), 65581-65591. DOI: https://doi.org/10.1021/acsami.4c15059
  32. Sana, Z., Sheraz, M., Muhammad, K., Natasha, S., Yan, C. L., Cumali, C., Nida, A., Asif, A., Hui, F. W., Shohreh, A. & Changchun, W. (2026). Advances in mesoporous nanomaterials for photocatalytic degradation of pollutants: fundamentals, material classifications, challenges and future prospects. Coordination Chemistry Reviews, 549(1), 217239. DOI: https://doi.org/10.1016/j.ccr.2025.217239
  33. Hamid, Z., Bosirul, H., Mahmoud, A. A., Ahmed, F. S., Omar, Y. A., Mansur, A., Abdullah, M. A., Abdullah, J. A. & Mahmoud, M. A. (2025). Recent advances and challenges in solid sorbents for CO2 capture. Carbon Capture Science & Technology, 15, 100386. DOI: https://doi.org/10.1016/j.ccst.2025.100386
  34. Enhui, J., Yan, Y. & Yongsheng, Y. (2025). Copper Active Sites in Metal-Organic Frameworks Advance CO2 Adsorption and Photocatalytic Conversion. Catalysts, 15(9), 856. DOI: https://doi.org/10.3390/catal15090856
  35. Nimibofa, A., Augustus, N. E. & Donbebe, W. (2017). Modelling and Interpretation of Adsorption Isotherms. Journal of Chemistry, 2017(1), 1-11. DOI: https://doi.org/10.1155/2017/3039817
  36. Despina, A. G., Athanasia, K. T., Ioannis, A. K. & George, Z. K. (2025). The adsorption-desorption-regeneration pathway to a circular economy: The role of waste-derived adsorbents on chromium removal. Separation and Purification Technology, 368, 132996. DOI: https://doi.org/10.1016/j.seppur.2025.132996
  37. Abubakr, M. E., Ismat, H. A., Eid, I. B., Babiker, K. A. (2021). Evaluation of the Adsorption Efficiency on the Removal of Lead(II) Ions from Aqueous Solutions Using Azadirachta indica Leaves as an Adsorbent. Processes, 9(3), 559. DOI: https://doi.org/10.3390/pr9030559
  38. Woranart, J., Htet, M. T., Naphat, K., Kanita, C., Sorayot, C., Sira, S., Nikom, K. & Poomiwat, P. (2024). Adsorption capability and regenerability of carbon slit micropores for CO2 capture. International Journal of Thermofluids, 23, 100781. DOI: https://doi.org/10.1016/j.ijft.2024.100781
  39. Raganati, F., Alfe, M., Gargiulo, V., Chirone, R., Ammendola, P. (2018). Isotherms and thermodynamics of CO2 adsorption on a novel carbon-magnetite composite sorbent. Chemical Engineering Research and Design, 134, 540–552. DOI: https://doi.org/10.1016/j.cherd.2018.04.037

Last update:

No citation recorded.

Last update:

No citation recorded.