DOI: https://doi.org/10.9767/jcerp.20576

Process Optimization of Cumene Production: Energy Efficiency Optimization and Conversion Enhancement through Heat Integration and Recycle Strategies

Department of Chemical Engineering, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia

Received: 12 Dec 2025; Revised: 18 Dec 2025; Accepted: 18 Dec 2025; Available online: 3 Jan 2026; Published: 30 Jun 2026.
Editor(s): Istadi Istadi
Open Access Copyright (c) 2026 by Authors, Published by Universitas Diponegoro and BCREC Publishing Group
Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Fulltext View|Download

Citation Format:
Cover Image
Abstract

Cumene production via benzene–propylene alkylation is a highly exothermic process that requires effective thermal management. This study aims to optimize energy efficiency and enhance conversion performance in cumene production through the integration of reactor heat recovery and recycle strategies. To improve heat utilization efficiency, the process was modified by integrating a circulating heat transfer fluid system that captures reactor heat and reuses it for feed preheating, thereby reducing external utility demand. Additional heat released during effluent cooling is recovered to supply the mechanical energy required for pumping. The modified and baseline configurations were modeled using chemical process simulator and evaluated using a net energy (NE) framework. Results show that the basic process yields an NE of 3,119,682.58 kJ/h, while the modified process achieves 2,055,114.79 kJ/h, with 21,294,605.8 kJ/h of internal energy successfully recovered and reused. This demonstrates a substantial improvement in thermal integration and reduced reliance on external heating. Furthermore, the introduction of a vapor phase benzene recycle stream enhances benzene conversion, suppresses secondary alkylation, and increases cumene yield. Overall, the integrated heat recovery and recycle strategy significantly improves energy efficiency, conversion performance, and sustainability in cumene production. Copyright © 2026 by Authors, Published by Universitas Diponegoro and BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Keywords: Cumene; Alkylation; Conversion; Process modifications; Heat efficiency

Article Metrics:

Article Info
Section: Original Research Articles
Language : EN
Recent articles
Recovery and Utilization of Waste Heat from Cooler Effluent for Preheating Applications Process Optimization of Chlorobenzene Production through the Integration of a Distillation Unit and Mixer in Gas–Liquid Benzene Chlorination Process Optimization of Hydrogen Production via the Water–Gas Shift Reaction Using CO Recycle and Exothermic Reactor Operation More recent articles
  1. Ecoinvent. (2024). Cumene production, benzene alkylation, UOP process – Documentation [Dataset documentation]. ecoQuery. https://ecoquery.ecoinvent.org/3.11/cutoff/dataset/94226/documentation
  2. Junqueira, P.G., Mangili, P.V., Santos, R.O., Santos, L.S., Prata, D.M. (2018). Economic and environmental analysis of the cumene production process using computational simulation. Chemical Engineering and Processing: Process Intensification, 130, 309–325. DOI: 10.1016/j.cep.2018.06.010
  3. Ahmad, F., Ahmad, N., Al-Khazaal, A.A.Z. (2024). Machine learning-assisted prediction and optimization of exergy efficiency and destruction of cumene plant under uncertainty. Engineering, Technology & Applied Science Research, 14(1), 12892–12899. DOI: 10.48084/etasr.6654
  4. Ayub, A., Zulkefal, M., Sethi, H. (2024). Artificial intelligence assisted investigation of quality and yield of cumene production. Materials Proceedings, 17(1). DOI: 10.3390/materproc2024017010
  5. Sutjahjo, F., Medri, L., Alyani, S., Budhy, C.L. (2024). Enhancing energy efficiency of cumene production through reactor output recycling modification. Journal of Chemical Engineering Research Progress. 1(1), 64-73. DOI: 10.9767/jcerp.20100
  6. Hazmi, H.A. (2022). Process simulation and sensitivity analysis of cumene production from an integrated alkylation and transalkylation reaction. Journal of Chemical Process Engineering, 7(2), 64–78. DOI: 10.33536/jcpe.v7i2.787
  7. Luyben, W.L. (2012). Principles and case studies of simultaneous design. John Wiley & Sons
  8. Naniwadekar, M., Jadhav, S. (2017). Optimum heat integration of cumene process by heat exchanger network. International Journal of Current Research, 7(8), 18995–19003
  9. Wosu, C.O., Anisa, O., Nelson, F.O. (2025). Comparative design of flow reactors for the production of 100,000 tons per year of cumene from the catalytic alkylation of propylene and benzene. LAUTECH Journal of Engineering and Technology, 19(1), 142–153
  10. Ojong, O.E., Wosu, O.C., Emenike, A., Ubi, P.A. (2024). Design and simulation of 30000 tons per year of cumene plant from natural gas field. Pure and Applied Chemistry, 96(6), 795–805. DOI: 10.1515/pac-2023-1135
  11. Zou, Y., Jiang, H., Liu, Y., Gao, H., Xing, W., Chen, R. (2016). Highly efficient synthesis of cumene via benzene isopropylation over nano-sized beta zeolite in a submerged ceramic membrane reactor. Separation and Purification Technology, 170, 49–56. DOI: 10.1016/j.seppur.2016.06.031
  12. Turton, R., Shaeiwitz, J.A., Bhattacharyya, D. (2018). Analysis, Synthesis, and Design of Chemical Processes (5th ed.). Pearson Education
  13. Srivastava, P., Gupta, A., Kaistha, N. (2023). Compact process for cumene manufacture: Synthesis, design and control. Chemical Engineering Research and Design, 190, 220–232. DOI: 10.1016/j.cherd.2022.12.026
  14. Mahmoudian, F., Moghaddam, A.H., Davachi, S.M. (2022). Genetic-based multi-objective optimization of alkylation process by a hybrid model of statistical and artificial intelligence approaches. The Canadian Journal of Chemical Engineering, 100(1), 90–102. DOI: 10.1002/cjce.24072
  15. Hasibuan, F.A.Y., Tarigan, K. (2024). Process simulation of cumene production via liquid phase reaction pathway. Jurnal Rekayasa, Teknologi Proses dan Sains Kimia (REPROKIMIA), 3(1), 7–17
  16. Yaws, L.C. (1999). Chemical Properties Handbook. McGraw-Hill
  17. Kavitha, S., Kurian, M. (2022). Friedel Craft’s alkylation of benzene to cumene over doped cobalt nanoferrite catalysts. Results in Chemistry, 4, 100585. DOI: 10.1016/j.rechem.2022.100585
  18. Aminov, R.Z., Yurin, V.E., Bessonov, V.N. (2017). Investigation of the possibility of using residual heat reactor energy. Journal of Physics: Conference Series, 891(1), 012175. DOI: 10.1088/1742-6596/891/1/012175
  19. Sánchez-Luján, J., Molina-García, Á., López-Cascales, J.J. (2024). Integrated heat recovery system based on mixed ionic–electronic conducting membrane for improved solid oxide co-electrolyzer performance. Polymers, 16(7), 932. DOI: 10.3390/polym16070932
  20. Seider, W.D., Seader, J.D., Lewin, D.R. (2004). Product and Process Design Principles: Synthesis, Analysis, and Evaluation. Wiley
  21. FENG, J. (2021). Research on input and output of China’s energy industry from the perspective of net energy. China Mining Magazine, 30(10), 18–23. DOI: 10.12075/j.issn.1004-4051.2021.10.007

Last update:

No citation recorded.

Last update:

No citation recorded.