DOI: https://doi.org/10.9767/bcrec.12.2.496.167-184

Hydrocracking of Cerbera manghas Oil with Co-Ni/HZSM-5 as Double Promoted Catalyst

1Chemical Reaction Engineering Laboratory, Department of Chemical Engineering, , Indonesia

2Sepuluh Nopember Institute of Technology, Sukolilo, Surabaya, 60111, Indonesia

Received: 20 May 2016; Revised: 30 Jan 2017; Accepted: 10 Feb 2017; Available online: 8 May 2017; Published: 1 Aug 2017.
Editor(s): Istadi Istadi
Open Access Copyright (c) 2017 by Authors, Published by BCREC Group under http://creativecommons.org/licenses/by-sa/4.0.
Fulltext View|Download

Citation Format:
Cover Image
Abstract

The effect of various reaction temperature on the hydrocracking of Cerbera manghas oil to produce a paraffin-rich mixture of hydrocarbons with Co-Ni/HZSM-5 as doubled promoted catalyst were studied. The Co-Ni/HZSM-5 catalyst with various metal loading and metal ratio was prepared by incipient wetness impregnation. The catalysts were characterized by XRD, AAS, and N2 adsorption-desorption. Surface area, pore diameter, and pore volume of catalysts decreased with the increasing of metals loading. The hydrocracking process was conducted under hydrogen initial pressure in batch reactor equipped with a mechanical stirrer. The reaction was carried out at a temperature of 300-375 oC for 2 h.  Depending on the experimental condition, the reaction pressure changed between 10 bar and 15 bar.   Several parameters were used to evaluate biofuel produced, including oxygen removal, hydrocarbon composition and gasoline/kerosene/diesel yields. Biofuel was analyzed by Fourier Transform Infrared Spectroscopic (FTIR) and gas chromatography-mass spectrometry (GC-MS). The composition of hydrocarbon compounds in liquid products was similar to the compounds in the gasoil sold in unit of Pertamina Gas Stations, namely pentadecane, hexadecane, heptadecane, octadecane, and nonadecane with different amounts for each biofuel produced at different reaction temperatures. However, isoparaffin compounds were not formed at all operating conditions. Pentadecane (n-C15) and heptadecane (n-C17) were the most abundant composition in gasoil when Co-Ni/HZSM-5 catalyst was used. Cerbera Manghas oil can be recommended as the source of non-edible vegetable oil to produce gasoil as an environmentally friendly transportation fuel. 

Keywords: Biofuel; Cerbera manghas oil; Co-Ni/HZSM-5 catalyst; Hydrocracking
Funding: DP2M-DIKTI

Article Metrics:

Article Info
Section: Original Research Articles
Language : EN
Recent articles
A Review on Catalytic Membranes Production and Applications Hydrocracking of Cerbera manghas Oil with Co-Ni/HZSM-5 as Double Promoted Catalyst Partial Oxidation of Propylene over as Prepared and Acid Enriched Bi2Mo1-xWxO6 System Kinetics of the Enzymatic Hydrolysis of Sweet Cassava Starch and Bitter Cassava Flour and Gadung (Dioscorea hispida Dennst) Flour at Low Temperature Synthesis of SrO.SiO2 Catalyst and Its Application in the Transesterification Reactions of Soybean Oil Author Guidelines (2017) Front-matter More recent articles
  1. Atabani, A.E., Silitonga, A.S., Ong, H.C., Mahlia, T.M.I., Masjuki, H.H., Badruddin, I A., Fayaz, H. (2013). Non-Edible Vegetable Oils: A Critical Evaluation of Oil Extraction, Fatty Acid Compositions, Biodiesel Production, Characteristics, Engine Performance and Emissions Production. Renewable and Sustainable Energy Reviews, 18: 211-245
  2. Kim, S.K., Brand, S., Lee, H., Kim, Y., Kim, J. (2013). Production of Renewable Diesel by Hydrotreatment of Soybean Oil: Effect of Reaction Parameters. Chemical Engineering Journal, 228: 114-123
  3. Romero, M., Pizzi, A., Toscano, G., Casazza, A.A., Busca, G., Bosio, B., Arato, E. (2015). Preliminary Experimental Study on Biofuel Production by Deoxygenation of Jatropha Oil. Fuel Processing Technology, 137: 31-37
  4. Furimsky, E. (2013). Hydroprocessing Challenges in Biofuels Production. Catalysis Today, 217: 13-56
  5. Yigezu, Z.D., Muthukumar, K. (2014). Catalytic Cracking of Vegetable Oil with Metal Oxides for Biofuel Production. Energy Conversion and Management, 84: 326-333
  6. Verma, D., Rana, B.S., Kumar, R., Sibi, M.G., Sinha, A.K. (2015). Diesel and Aviation Kerosene with Desired Aromatics from Hydroprocessing of Jatropha Oil over Hydrogenation Catalysts Supported on Hierarchical Mesoporous SAPO-11. Applied Catalysis A: General, 490: 108-116
  7. Satyarthi, J.K., Srinivas, D. (2011). Fourier Transform Infrared Spectroscopic Method for Monitoring Hydroprocessing of Vegetable Oils to Produce Hydrocarbon-Based Biofuel. Energy Fuels, 25: 3318-3322
  8. Zhang, H, Lin H., Zheng, Y. (2014). The Role of Cobalt and Nickel in Deoxygenation of Vegetable Oils. Applied Catalysis B: Environmental, 160-161: 415-422
  9. Ishihara, A., Fukui, N., Nasu, H., Hashimoto, T. (2014). Hydrocracking of Soybean Oil using Zeolite-Alumina Composite Supported NiMo Catalyst. Fuel, 134: 611-617
  10. Arun, N., Sharma, R.V., Dalai, A.K. (2015). Green Diesel Synthesis by Hydrodeoxygenation of Bio-Based Feedstocks: Strategies for Catalyst Design and Development. Renewable and Sustainable Energy Reviews, 48: 240-255
  11. Teixeira da Silva, V., Sousa, L.A. (2013). Catalytic Upgrading of Fats and Vegetable Oils for the Production of Fuels, Chapter 3. The Role of Catalysis for the Sustainable Production of Bio-fuels and Bio-chemicals: Elsevier B.V
  12. Veriansyah, B., Han, J.Y., Kim, S.K., Hong, S., Kim, Y.J., Lim, J.S., Shu, Y.W., Oh, S., Kim, J. (2012). Production of Renewable Diesel by Hydroprocessing of Soybean Oil: Effect of Catalysts, Fuel, 94: 578-585
  13. Pinto, F., Varela, F.T., Gonçalves, M., Neto André, R., Costa, P., Mendes, B. (2014). Production of Bio-Hydrocarbons by Hydrotreating of Pomace Oil. Fuel, 116: 84-93
  14. Roesyadi, A., Danawati, H P., Nurjannah, N., Savitri, S.D. (2013). HZSM-5 Catalyst for Cracking Palm Oil to Gasoline: A Comparative Study With and Without Impregnation. Bulletin of Chemical Reaction Engineering & Catalysis, 7 (3): 185-190
  15. Rismawati, R., Prihartantyo, A., Mahfud, M., Roesyadi, A. (2015). Hydrocracking of Calophyllum inophyllum Oil with Non-Sulfide CoMo Catalysts. Bulletin of Chemical Reaction Engineering & Catalysis, 10(1) : 61-69
  16. Rismawati, R., Prihartantyo, A., Mahfud, M., Roesyadi, A. (2015). Hydrocracking of Nyamplung Oil (Calophyllum inophyllum Oil) using CoMo/γ-Al2O3 and CoMo/SiO2 Catalysts. Modern Applied Science, 9: No. 7
  17. Budianto, A., Danawati, H P., Budhikarjono, K. (2014). Biofuel Production from Candlenut Oil using Catalytic Cracking Process with Zn/HZSM-5 Catalyst. ARPN Journal of Engineering and Applied Sciences, 9: No. 11
  18. Budianto, A., Danawati, H.P., Roesyadi, A., Budhikarjono, K. (2014). HZSM-5 Catalyst for Cracking Palm Oil to Biodiesel : A Comparative Study With and Without Pt and Pd Impregnation. Scientific Study & Research Chemistry & Chemical Engineering, Biotechnology, Food Industry, 15 (1): 081-090
  19. Shimura, K., Miyazawa, T., Hanaoka, T., Hirata, S. (2015). Fischer-Tropsch Synthesis over Alumina Supported Bimetallic Co–Ni Catalyst: Effect of Impregnation Sequence and Solution. Journal of Molecular Catalysis A: Chemical, 407: 15-24
  20. Stockwell, D.M., Lerner, B.A. (2013). Hydrocracking Catalyst and Process Using Insitu Produced Y-Fauajasite. Patent No. US 8372772 B2, United Stated Patent
  21. Sartipi, S., Parashar, K., Valero-Romero, M. J., Santos, V.P., Bart van der Linden, Makkee, M., Kapteijn, F., Gascon, J. (2013). Hierarchical H-ZSM-5 Supported Cobalt for Direct Synthesis of Gasoline Range Hydrocarbon from Syngas: Advantages, Limitation, and Mechanistic Insight. Journal of Catalysis, 305: 179-190
  22. Haber, J., Block, J.H., Delmon, B. (1995). Manual of Methode and Procedures for Catalyst Characterization, Technical Report, Pure & Appl. Chem., Physical Chemistry Division Commission On Colloid And Surface Chemistry, 67(8/9): 1257-1306
  23. Hao, K., Shen, B., Wang, Y., Ren, J. (2012). Influence of Combined Alkaline Treatment and Fe-Ti-loading Modification on ZSM-5 Zeolite and Its Catalytic Performance in Light Olefin Production. Journal of Industrial and Engineering Chemistry, 18: 1736-1740
  24. Wang, S., Yin, Q.,Guo, J., Ru, B., Zhu, L. (2013). Improved Fischer-Tropsch Synthesis for Gasoline over Ru, Ni Promoted Co/HZSM-5 Catalyst. Fuel, 108: 597-603
  25. Vitale, G., Molero, H., Hernandez, E., Aquino, S., Birss, V., Pereira-Almao, P. (2013). One-pot Preparation and Characterization of Bifunctional Ni-containing ZSM-5 Catalyst. Applied Catalyst A : General, 452: 75-87
  26. Romero, M.D., Calles, J.A., Rodrı´guez, A., Cabanelas, J.C. (1998), The Influence of Calcination Treatment over Bifunctional Ni/HZSM-5 Catalysts. Industrial and Engineering Chemistry Research, 37: 3846-3852
  27. Martinez-Grimaldo, H., Ortiz-Moreno, H., Sanchez-Minero, F., Ramirez, J., Cuevas-Garcia, R., Ancheyta-Juarez, J. (2014). Hydrocracking of Maya Crude Oil in Slurry-Phase Reactor. I. Effect of Reaction Temperature. Catalysis Today, 220-222: 295-300
  28. Barrón, C.A.E., Melo-Bandaa, J.A., Dominguez, E.J.M., Hernández, M.E., Silva, R.R., Reyes, T.A.I., Meraz, M.M.A. (2011). Catalytic Hydrocracking of Vegetable Oil for Agrofuels Production using Ni-Mo, Ni-W, Pt and TFA Catalysts Supported on SBA-15. Catalysis Today, 166: 102-110
  29. Niu, X., Gao, J., Miao, Q., Dong, M., Wang, G., Fan, W., Qin, Z., Wang, J. (2014). Influence of Preparation Method on the Performance of Zn-containing HZSM-5 Catalysts in Methanol-to-Aromatics. Microporous and Mesoporous Materials, 197: 252-261
  30. Gayubo, A.G., Alonso, A., Valle, B., Aguayo, A.T., Olazar, M., Bilbao, J. (2010). Hydrothermal Stability of HZSM-5 Catalysts Modified with Ni for the Transformation of Bioethanol into Hydrocarbons. Fuel, 89: 3365-3372
  31. Pinto, F., Martins, M., Gonçalves, M., Costa, P., Gulyurtlu, I., Alves, A., Mendes, B. (2013) Hydrogenation of Rapeseed Oil for Production of Liquid Bio-Chemicals. Applied Energy, 102: 272-282
  32. Zheng, X., Chang, J., Fu, Y. (2015). One-pot Catalytic Hydrocracking of Diesel Distillate and Residual Oil Fractions Obtained from Bio-Oil to Gasoline-Range Hydrocarbon Fuel. Fuel, 157: 107-114
  33. Rabaev, M., Landau, M.V., Vidruk-Nehemya, R., Koukouliev, V., Zarchin, R., Herskowitz, M. (2015). Conversion of Vegetable Oils on Pt/Al2O3/SAPO-11 to Diesel and Jet Fuels Containing Aromatics. Fuel, 161: 287-294
  34. Sotelo-Boyás, R., Liu, Y., Minowa, T. (2011). Renewable Diesel Production from the Hydrotreating of Rapeseed Oil with Pt/Zeolite and NiMo/Al2O3 Catalysts. Industrial and Engineering Chemistry Research, 50 (5): 2791-2799
  35. Vichaphund, S., Aht-ong, D., Sricharoenchaikul, V., Atong, D. (2015). Production of Aromatic Compounds from Catalytic Fast Pyrolysis of Jatropha Residues using Metal/HZSM-5 Prepared by Ion-Exchange and Impregnation Methods. Renewable Energy, 79: 28-37
  36. Liu, S., Zhu, Q., Guan, Q., He, L., Li, W. (2015). Bio-aviation Fuel Production from Hydroprocessing Castor Oil Promoted by the Nickel-Based Bifunctional Catalysts. Bioresource Technology, 183: 93-100
  37. Chen, H., Wang, Q., Zhang, X., Wang, L. (2015). Quantitative Conversion of Triglycerides to Hydrocarbons over Hierarchical ZSM-5 Catalyst. Applied Catalysis B: Environmental, 166-167: 327-334
  38. Marlinda, L., Al-Muttaqii, M., Roesyadi, A., Danawati, H.P. (2016). Production of Biofuel by Hydrocracking of Cerbera Manghas Oil Using Co-Ni/HZSM-5 Catalyst : Effect of Reaction Temperature. J. Pure App. Chem. Res., 5 (3): 189-195

Last update:

No citation recorded.

Last update:

No citation recorded.