Catalytic Polymerization of Acrylonitrile by Khulays Bentonite

Matar M. Al-Esaimi

doi:10.9767/bcrec.2.1.4.6-10

DOI: https://doi.org/10.9767/bcrec.2.1.4.6-10

Catalytic Polymerization of Acrylonitrile by Khulays Bentonite

Matar M. Al-Esaimi

Chemistry Department, Faculty of Applied Science, Umm Al Qura University, Makkah Al-Mukarramah, P.O. Box 4496, Saudi Arabia

Received: 5 Feb 2007; Revised: 19 Apr 2007; Accepted: 7 May 2007; Published: 20 Jun 2007.

Editor(s): Istadi Istadi

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Fulltext View|Download

Citation Format:

Abstract

The aqueous polymerization of acrylonitrile (AN) catalyzed with exchanged Khulays bentonite . The influence of various polymerization parameters ( e.g., concentrations of Potassium Persulfate (K2S2O8) and monomer , various of organic solvents, and different temperature has been investigated. It was found that the rate of polymerization of AN was found to be dependent on monomer concentration, initiator and temperature. The activation energy of polymerization was calculated .Thermal properties of the polymer were studied by TGA and DSC techniques. © 2007 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0)

Keywords: bentonite; catalyst; acrylonitrile; polymerization; bentonite

Article Metrics:

Article Info

Section: Original Research Articles

Language : EN

In 2007: BCREC: Volume 2 Issue 1 Year 2007 (June 2007)

Recent articles

Catalytic Polymerization of Acrylonitrile by Khulays Bentonite Advances in Nanocatalysis Research for Carbon Nanotubes Formation and Photocatalytic Degradation of Phenol More recent articles

Milliken, T.K, Miles, G.A, and Oblad. A.D., Trans.,Faraday Soc., 8, 50, 279
Pinnavaia, T.J. , Tzou, M.S. , Landau, S.D. , Raythatha, R.H. , J. Mol. Catal. 27 (1984) 195
Yoo, J.W., Lee, C.W., Jeong, H.-C. , Park, Y.-K. , Park, S.-E. , Catal. Today, 60 (2000) 255
Choudary, B.M. , Kantam, M.L., Sateesh, M. , Rao, K.K. , Santhi, P.L., Appl. Catal. A: Gen. , 149 (1997) 257
Inui, K. , Kurabayashi, T., Sato,S., Ichikawa, N., J. Mol Catal. A , 216 (2006), 147
Laszlo, P., and Mathy, A., Hev.Chim.Acta, 70, 1987, 577
Vinu, A., Ariga, K., Devassy, B.M., M. Hartmann, Halligudi, S.B., Micropor. Mesopor. Mater. 80 (2005) 195
Al-Esaimi, M.M., Inter Jour. Chem., 16, 2006, 75
Cornelis, A., Laszlo, P, and Pennelneau, P., Bull. Soc. Chim, BELG., 961, 1987, 29
Al-Esaimi, M.M., J. Appl. Polym. Sci., 64, 1997, 367
Breen, C., Zahoor, F., Madejova, D., Komadel, P.J., J. Phys. Chem. B, 101, 1997, 5324
Eliseeva VI. Emulsion polymerization and its application in industry. New York : C Bureau, 1981
Kotkar, D., Ghosh, P.K., J. Chem. Soc. Chem. Commun., 950, 1986
(a) Lin WC, Liu TY, Yang MC. Biomaterials, 25, 2004, 1947
(b) Clark WR, Gao D, Ronco C. In: Ronco C, La Greca G, editors., Hemodialysis technology. Basel: Karger Publisher; 2002. p. 70
(a) Ulbricht M, Richau K, Kamusewitz H.,Colloid Surf ,A,138,1998, 353
(b) Musale DA, Kulkarni SS. J Membr Sci 1997, 13,136
(c) Qin JJ, Cao YM, Li YQ, Li Y, Oo MH, Lee H. Sep Purif .Technol, 36, 2004, 149
(d) Jung B. J Membr. Sci, 129, 2004,229
(e) Yang MC, Liu TY. J Membr. Sci., 119,2003,226
(a) Ulbricht M, Papra A. Enzyme Microb .Technol, 199761
(b) Godjevargova T, Konsulov V, Dimov A. J Membr. Sci,152,1999,235
(c) Godjevargova T, Dimov A, Vassileva N. J Membr. Sci, 116, 1996,273
(a) Bhat AA, Pangarkar VG. J Membr. Sci, 167, 2000, 187
(b) Mandal S, Pangarkar VG. Sep Purif .Technol, 30, 2003,147
Shen,S., Sudol,E.D., El-Aasser,M.S., J. Polym. Sci. Polym. Chem. 31,
Liu, J., Chew, C.H., Wong, S.Y., Gan, L.M. , Lin, J. ,Tan, K.L. , Polymer 39 (1998) 283
Capek, I. , Macromol. Chem. Phys. 195 (1994) 1137
Christian, P., Giles, M.R., Griffiths, R.M.T.,Irvine, D.J., Major, , D.J., S.M. Howdle, Macromolecules 33 (2000) 9222
Shen,S., Sudol, E.D., El-Aasser, M.S., J. Polym. Sci. Polym. Chem. 30 (1992) 2765
Beharai,K.,Bahadur,L.,Agarwal,U., J. Am. Chem. Soc., (Polym.Div.) Polym.Prep., 35,1994, (1)117
Capek, I., Le Quang, T. , Makromol. Chem. 187 (1986) 2063
Candau,F., Ottewill,.H.,R "An Introduction to Polymer Colloids", Kluwer Academic, Dordrecht, 1990
Wang YM, Feng LX, Pan CY. J Appl Polym Sci,70,1998,2307
Huang X, Brittain WJ. Macromolecules , 34,2001, 3255
Khor,S.H., Neoh,K.G., Kang,E.T., J. Appl. Polym. Sci., 40, (1990), 2015
Yue,J., Epstein,A.J., Zhong,Z., Gallagher,P.K., Mac Diarmid,A.G.,
Freshour,G.B., in: Masson,J.C. (Ed.), "Acrylic Fibre Technology and Applications", vol. 1, Marcel Dekker, New York, 1995, Chapter 7, p. 197
Lin W, Hsieh YL, Warganich D, Zhou WJ, Kurth MJ, Krochta M., Polymer, 39, 1998,4911

Last update:

No citation recorded.

Last update:

No citation recorded.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Journal Author(s) Rights

In order for Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group to publish and disseminate research articles, we need non-exclusive publishing rights (transfered from author(s) to publisher). This is determined by a publishing agreement between the Author(s) and Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group. This agreement deals with the transfer or license of the right for publishing to Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group, while Authors still retain significant all copy rights to use and share their own published articles. Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group supports the need for authors to share, disseminate and maximize the impact of their research and these rights, in any databases.

As a journal Author, you have all copy rights for a large range of uses of your article, including use by your employing institute or company. These Author copy rights can be exercised without the need to obtain specific permission. Authors who publishing in BCREC journals have wide copy rights to use their works for teaching and scholarly purposes without needing to seek permission, including, but not limited to:

use for classroom teaching by Author or Author's institution and presentation at a meeting or conference and distributing copies to attendees;
use for internal training by author's company;
distribution to colleagues for their reseearch use;
use in a subsequent compilation of the author's works;
inclusion in a thesis or dissertation;
reuse of portions or extracts from the article in other works (with full acknowledgement of final article);
preparation of derivative works (other than commercial purposes) (with full acknowledgement of final article);
voluntary posting on open web sites operated by author or author’s institution for scholarly purposes,

(but it should follow the open access license of Creative Common CC-by-SA License).

Authors/Readers/Third Parties can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, even commercially, but they must give appropriate credit (the name of the creator and attribution parties (authors detail information), a copyright notice, an open access license notice, a disclaimer notice, and a link to the material), provide a link to the license, and indicate if changes were made (Publisher indicates the modification of the material (if any) and retain an indication of previous modifications using a CrossMark Policy and information about Erratum-Corrigendum notification).

Authors/Readers/Third Parties can read, print and download, redistribute or republish the article (e.g. display in a repository), translate the article, download for text and data mining purposes, reuse portions or extracts from the article in other works, sell or re-use for commercial purposes, remix, transform, or build upon the material, they must distribute their contributions under the same license as the original Creative Commons Attribution-ShareAlike (CC BY-SA).

Right Transfer Agreement for Publishing (RTAP)

The Authors submitting a manuscript do so on the understanding that if accepted for publication, non-exclusive right for publishing (publishing right) of the article shall be assigned/transferred to Publisher of Bulletin of Chemical Reaction Engineering & Catalysis journal (Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group).

Upon acceptance of an article, authors will be asked to complete a 'Right Transfer Agreement for Publishing (RTAP)'. An e-mail will be sent to the Corresponding Author confirming receipt of the manuscript together with a 'Right Transfer Agreement for Publishing' form by online version of this agreement.

Bulletin of Chemical Reaction Engineering & Catalysis journal and Masyarakat Katalis Indonesia-Indonesian Catalyst Society (MKICS), the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in the Bulletin of Chemical Reaction Engineering & Catalysis are sole and exclusive responsibility of their respective authors and advertisers.

Remember, even though we ask for a transfer of right for publishing (RTAP), our journal Author(s) still retain (or are granted back) significant scholarly copy rights as mentioned before.

The Right Transfer Agreement for Publishing (RTAP) Form can be downloaded here: [Right Transfer Agreement for Publishing (RTAP) Form BCREC 2025]

The copyright form should be signed electronically and send to the Editorial Office in the form of original e-mail below:

Prof. Dr. I. Istadi (Editor-in-Chief)
Editorial Office of Bulletin of Chemical Reaction Engineering & Catalysis
Laboratory of Plasma-Catalysis (R3.5), UPT Laboratorium Terpadu, Universitas Diponegoro
Jl. Prof. Soedarto, Semarang, Central Java, Indonesia 50275
Telp/Whatsapp: +62-81-316426342
E-mail: bcrec[at]live.undip.ac.id ; bcrec[at]che.undip.ac.id

(This policy statements has been updated at 24th January 2024)