Design of a Simple and Cheap Water Electrolyser for the Production of Solar Hydrogen

Ram Prasad

doi:10.9767/bcrec.4.1.7113.10-15

DOI: https://doi.org/10.9767/bcrec.4.1.7113.10-15

Design of a Simple and Cheap Water Electrolyser for the Production of Solar Hydrogen

Ram Prasad

Department of Chemical Engineering & Technology, Institute of Technology, Banaras Hindu University, Varanasi 221005, India

Received: 20 May 2009; Revised: 14 Aug 2009; Accepted: 19 Aug 2009; Published: 20 Oct 2009.

Editor(s): Istadi Istadi

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Fulltext View|Download

BibTex Citation Data :

@article{BCREC19696,
    author = {Ram Prasad},
    title = {Design of a Simple and Cheap Water Electrolyser for the Production of Solar Hydrogen},
    journal = {Bulletin of Chemical Reaction Engineering & Catalysis},
  volume = {4},
    number = {1},
    year = {2009},
    keywords = {Cheap electrolyser; Simple electrolyser; Water electrolysis; Solar hydrogen; Hydrogen energy},
    abstract = { Commercially available conventional alkaline electrolyser and advanced polymer membrane electrolysers for water electrolysis are quite expensive. Taking into account this aspect, a very simple and cheap water electrolyser has been designed and fabricated utilising easily available economical materials for small scale production of hydrogen using renewable energy from photovoltaic panel. The construction details of the electrolyser with a schematic drawing of the experimental set-up for PV production of H2 are given. In order to fabricate the compact electrolyser, two coaxial tubular PVC pipes were used. The lower part of the inner pipe has fine perforations for the transport of ions through electrolyte between the electrodes. Two cylindrical electrodes, cathode and anode are kept in inner and outer pipes respectively. The performance of hydrogen production was measured using a photovoltaic panel directly connected to the electrolyser under atmospheric pressure and in 27wt% KOH solution. Flow rates of hydrogen and oxygen were measured using a digital flow meter. High purity fuel cell grade hydrogen (99.98%) and oxygen (99.85%) have been produced. The experimental results confirm that the present electrolyser has eligible properties for hydrogen production in remote areas. No such electrolyser has been reported prior to this work.   © 2009 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (  https://creativecommons.org/licenses/by-sa/4.0  ) },
   issn = {1978-2993},   pages = {10--15}  doi = {10.9767/bcrec.4.1.7113.10-15},
    url = {https://journal.bcrec.id/index.php/bcrec/article/view/19696}
}

Citation Format:

Abstract

Commercially available conventional alkaline electrolyser and advanced polymer membrane electrolysers for water electrolysis are quite expensive. Taking into account this aspect, a very simple and cheap water electrolyser has been designed and fabricated utilising easily available economical materials for small scale production of hydrogen using renewable energy from photovoltaic panel. The construction details of the electrolyser with a schematic drawing of the experimental set-up for PV production of H2 are given. In order to fabricate the compact electrolyser, two coaxial tubular PVC pipes were used. The lower part of the inner pipe has fine perforations for the transport of ions through electrolyte between the electrodes. Two cylindrical electrodes, cathode and anode are kept in inner and outer pipes respectively. The performance of hydrogen production was measured using a photovoltaic panel directly connected to the electrolyser under atmospheric pressure and in 27wt% KOH solution. Flow rates of hydrogen and oxygen were measured using a digital flow meter. High purity fuel cell grade hydrogen (99.98%) and oxygen (99.85%) have been produced. The experimental results confirm that the present electrolyser has eligible properties for hydrogen production in remote areas. No such electrolyser has been reported prior to this work. © 2009 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0)

Keywords: Cheap electrolyser; Simple electrolyser; Water electrolysis; Solar hydrogen; Hydrogen energy

Article Metrics:

Article Info

Section: Original Research Articles

Language : EN

In 2009: BCREC Volume 4 Issue 1 Year 2009 (June 2009)

Recent articles

Catalytic Hydrolysis of Ethyl Acetate using Cation Exchange Resin (Amberlyst - 15) : A Kinetic Study Design of a Compact and Versatile Bench Scale Tubular Reactor Design of a Simple and Cheap Water Electrolyser for the Production of Solar Hydrogen Backmatter (Author Guideline, Copyright Transfer Agreement for Publishing Form) Frontmatter (Front Cover, Editorial Team, Indexing, and Table of Contents) More recent articles

Veziroglu, T. N. 2000. Quarter century of hydrogen movement 1974-2000. Int J Hydrogen Energy 25: 1143-1150
Lodhi, M. A. K. 1997. Photovoltaics and hydrogen: further energy options. Energy Convers Manage 38(18): 1881–93
Marshall, A.; Sunde, S.; Tsypkin, M.; and Tunold, R. 2007. Performance of a PEM water electrolysis cell using IrxRuyTazO2 electocatalysts for the oxygen evolution electrode. Int J Hydrogen Energy 32: 2320–2324
Marshall, A.; Sunde, S.; Tsypkin, M.; and Tunold, R. 2007. Performance of a PEM water electrolysis cell using IrxRuyTazO2 electocatalysts for the oxygen evolution electrode. Int J Hydrogen Energy 32: 2320–2324
Suffredini, H. B.; Cerne, J. L.; Crnkovic, F. C.; and Machado, S. A. S.; and Avaca, L. A. 2000. Recent development in electrode materials for water electrolysis. Int J Hydrogen Energy 25: 415-423
Ahmad, G. E.; and Shenawy, E. T. El. 2006. Optimized photovoltaic system for hydrogen production. Renewable Energy 31: 1043-1054
Kothari, R.; Buddhi, D.; and Sawhney, R. L. 2005. Studies of the effect of temperature of the electrolytes on the rate of production of hydrogen. Int J Hydrogen Energy 30: 251–63
Rzayeva, M. P.; Salamov, O. M.; and Kerimov, M. K. 2001. Modelling to get hydrogen and oxygen by solar water electrolysis. Int J Hydrogen Energy 26: 195-201
Orecchini, F.; Santiangeli, A.; and Dell’Era, A. 2006. A technological solution for everywhere energy supply with sun, hydrogen and fuel cells. J Fuel Cell Sci Technol 3(75)
Bilgen, E. 2001. Solar hydrogen from photovoltaic electrolyser systems. Energy Convers Manage 42: 1047–57
Lehman, P. A.; Chamberlin, C. E.; Pauletto, G.; and Rochelau, M. A. 1990. Operating experience with a photovoltaic hydrogen energy system. Int J Hydrogen Energy 24: 505–517
Nagaia, N.; Takeuchia, M.; Kimurab, T.; and Okaa, T. 2003. Int J Hydrogen Energy 28: 35-41
Abdallah, M. A. H.; Asfour, S. S.; and Veziroglu, T. N. 1990. Solar–hydrogen energy system for Egypt. Int J Hydrogen Energy 24: 505–17
Paul, B.; and Andrews, J. 2007. Optimal coupling of PV arrays to PEM electrolysers in solar-hydrogen systems for remote area power supply. Int J Hydrogen Energy 33: 490-498
Bilgen, E. 2004. Domestic hydrogen production using renewable energy. Solar Energy 77: 47-55
Marcelo, D.; and Dell’Era, A. 2008. Economical electrolyser solution. Int J Hydrogen Energy 33: 3041-3044
Isherwood, W.; Smith, J. R.; Aceves, S. M.; Berry, G.; Clark, W.; and Johnson R. 2000. Remote power systems with advanced storage technology for Alasks villages. Energy 25: 1005-1020

Last update:

No citation recorded.

Last update:

No citation recorded.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Journal Author(s) Rights

In order for Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group to publish and disseminate research articles, we need non-exclusive publishing rights (transfered from author(s) to publisher). This is determined by a publishing agreement between the Author(s) and Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group. This agreement deals with the transfer or license of the right for publishing to Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group, while Authors still retain significant all copy rights to use and share their own published articles. Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group supports the need for authors to share, disseminate and maximize the impact of their research and these rights, in any databases.

As a journal Author, you have all copy rights for a large range of uses of your article, including use by your employing institute or company. These Author copy rights can be exercised without the need to obtain specific permission. Authors who publishing in BCREC journals have wide copy rights to use their works for teaching and scholarly purposes without needing to seek permission, including, but not limited to:

use for classroom teaching by Author or Author's institution and presentation at a meeting or conference and distributing copies to attendees;
use for internal training by author's company;
distribution to colleagues for their reseearch use;
use in a subsequent compilation of the author's works;
inclusion in a thesis or dissertation;
reuse of portions or extracts from the article in other works (with full acknowledgement of final article);
preparation of derivative works (other than commercial purposes) (with full acknowledgement of final article);
voluntary posting on open web sites operated by author or author’s institution for scholarly purposes,

(but it should follow the open access license of Creative Common CC-by-SA License).

Authors/Readers/Third Parties can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, even commercially, but they must give appropriate credit (the name of the creator and attribution parties (authors detail information), a copyright notice, an open access license notice, a disclaimer notice, and a link to the material), provide a link to the license, and indicate if changes were made (Publisher indicates the modification of the material (if any) and retain an indication of previous modifications using a CrossMark Policy and information about Erratum-Corrigendum notification).

Authors/Readers/Third Parties can read, print and download, redistribute or republish the article (e.g. display in a repository), translate the article, download for text and data mining purposes, reuse portions or extracts from the article in other works, sell or re-use for commercial purposes, remix, transform, or build upon the material, they must distribute their contributions under the same license as the original Creative Commons Attribution-ShareAlike (CC BY-SA).

Right Transfer Agreement for Publishing (RTAP)

The Authors submitting a manuscript do so on the understanding that if accepted for publication, non-exclusive right for publishing (publishing right) of the article shall be assigned/transferred to Publisher of Bulletin of Chemical Reaction Engineering & Catalysis journal (Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group).

Upon acceptance of an article, authors will be asked to complete a 'Right Transfer Agreement for Publishing (RTAP)'. An e-mail will be sent to the Corresponding Author confirming receipt of the manuscript together with a 'Right Transfer Agreement for Publishing' form by online version of this agreement.

Bulletin of Chemical Reaction Engineering & Catalysis journal and Masyarakat Katalis Indonesia-Indonesian Catalyst Society (MKICS), the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in the Bulletin of Chemical Reaction Engineering & Catalysis are sole and exclusive responsibility of their respective authors and advertisers.

Remember, even though we ask for a transfer of right for publishing (RTAP), our journal Author(s) still retain (or are granted back) significant scholarly copy rights as mentioned before.

The Right Transfer Agreement for Publishing (RTAP) Form can be downloaded here: [Right Transfer Agreement for Publishing (RTAP) Form BCREC 2025]

The copyright form should be signed electronically and send to the Editorial Office in the form of original e-mail below:

Prof. Dr. I. Istadi (Editor-in-Chief)
Editorial Office of Bulletin of Chemical Reaction Engineering & Catalysis
Laboratory of Plasma-Catalysis (R3.5), UPT Laboratorium Terpadu, Universitas Diponegoro
Jl. Prof. Soedarto, Semarang, Central Java, Indonesia 50275
Telp/Whatsapp: +62-81-316426342
E-mail: bcrec[at]live.undip.ac.id ; bcrec[at]che.undip.ac.id

(This policy statements has been updated at 24th January 2024)