DOI: https://doi.org/10.9767/bcrec.6.2.829.63-113

Applications and Preparation Methods of Copper Chromite Catalysts: A Review

Department of Chemical Engineering & Technology, Banaras Hindu University, Varanasi 221005, India

Received: 19 Mar 2011; Revised: 3 May 2011; Accepted: 23 May 2011; Published: 20 Dec 2011.
Editor(s): Istadi Istadi
Open Access Copyright (c) 2011 by Authors, Published by BCREC Group
Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Fulltext View|Download

Citation Format:
Abstract
In this review article various applications and preparation methods of copper chromite catalysts have been discussed. While discussing it is concluded that copper chromite is a versatile catalyst which not only catalyses numerous processes of commercial importance and national program related to defence and space research but also finds applications in the most concerned problem worldwide i.e. environmental pollution control. Several other very useful applications of copper chromite catalysts are in production of clean energy, drugs and agro chemicals, etc. Various preparation methods about 15 have been discussed which depicts clear idea about the dependence of catalytic activity and selectivity on way of preparation of catalyst. In view of the globally increasing interest towards copper chromite catalysis, reexamination on the important applications of such catalysts and their useful preparation methods is thus the need of the time. This review paper encloses 369 references including a well-conceivable tabulation of the newer state of the art. © 2011 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0)
Keywords: Copper chromite; Applications; Preparation methods; Review
Funding: Department of Science and Technology, India

Article Metrics:

Article Info
Section: Review Articles
Language : EN
Recent articles
Applications and Preparation Methods of Copper Chromite Catalysts: A Review Impeller Submergence Depth for Stirred Tanks System Identification for Experimental Study for Polymerization Catalyst Reaction in Fluidized Bed Catalyst Deactivation Simulation Through Carbon Deposition in Carbon Dioxide Reforming over Ni/CaO-Al2O3 Catalyst Frontmatter (Front Cover, Editorial Team, Indexing, and Table of Contents) Backmatter (Author Guideline, Copyright Transfer Agreement for Publishing Form) More recent articles
  1. Rao, R.; Dandekar, A.; Baker, R.T.K.; and Vannice, M.A.; 1997. Properties of Copper Chromite Catalysts in Hydrogenation Reactions. J. Catal. 171: 406-419
  2. Prasad, R. 2005. Highly active copper chromite catalyst produced by thermal decomposition of ammoniac copper oxalate chromate. Mater. Lett. 59: 3945-3949
  3. Ma, Z.; Xiao, Z.; Bokhoven, J.A.V.; and Liang, C. 2010. A non-alkoxide sol-gel route to highly active and selective Cu-Cr catalysts for glycerol conversion. J. Mater. Chem. 20:755-760
  4. George, K.; Sugunan, S.; 2008. Nickel substituted copper chromite spinels: Preparation, characterization and catalytic activity in the oxidation reaction of ethylbenzene. Catal. Commun. 9: 2149-2153
  5. Barman, S.; Acharya, N.C.P.A.; and Pramanik, P. 2006. Kinetics of Reductive Isopropylation of Benzene with Acetone over Nano-Copper Chromite-Loaded H-Mordenite. Ind. Eng. Chem. Res. 45: 3481-3487
  6. Wang, H.; Chen, L.; Luan, D.; Li, Y.; Yan, Z.; Zhang, Y.; and Xing,J. 2006. A continuous process for the synthesis of homopiperazine catalyzed by cu-based catalysts, React. Kinet. Catal. Lett. 89: 201-208
  7. Green, R.V.; and Moses, D.V. 1952. Destructive catalytic oxidation of aqueous waste materials. Sewage and Indust. Wastes 24: 288-299
  8. Vlasenko, V.M; and Chernobrivets, V.L. 2002. Catalytic purification of gases to remove vinyl chloride. Russian J. Appl. Chem.75: 1262-31264
  9. Laine, J.; Severino, F. 1990. Changes in alumina-supported copper and copper-chromite catalysts by the introduction of water during carbon monoxide oxidation. Appl. Catal. 65 (2): 253-258
  10. Wei, L.; Hua, C. 2007. Synthesis and characterization of Cu-Cr-O nanocomposites. J. Cent. South Univ. Technol.: 03-0291-05
  11. Saadi, S.; Bouguelia, A.; Trari, M.; 2006. Photoassisted hydrogen evolution over spinel CuM2O4 (M = Al, Cr, Mn, Fe and Co.). Renew. Energ. 31: 2245-2256
  12. Yan J.; Zhang, L.; Yang, H.; Tang Y.; Lu Z.; Guo S.; Dai Y.; Han Y.; Yao, M.; 2009. CuCr2O4/TiO2 Heterojunction for photocatalytic H2 evolution under simulate sunlight irradiation. Sol. Energy 83: 1534-1539
  13. Boumaza, S.; Bouarab, R.; Trari, M.; Bouguelia, A. 2009. Hydrogen photo-evolution Over the spinel CuCr2O4. Energ. Convers. Manage. 50: 62-68
  14. Valde´s-Soli´s, T.; Marba´n, G.; Fuertes, A.B. 2006. Nanosized catalysts for the production of hydrogen by methanol steam reforming. Catal. Today 116: 354-360
  15. Boumaza S.; Auroux, A.; Bennici, S.; Boudjemaa, A.; Trari, M.; Bouguelia,A.; Bouarab, R. 2010. Water gas shift reaction over the CuB2O4 spinel catalysts. Reac Kinet Mech Cat 100:145-151
  16. Ginosar, D. M.; Rollins, H. W.; Petkovic, L. M.; Burch, K. C.; Rush, M. J.; 2009. High-temperature sulfuric acid decomposition over complex metal oxide catalysts. Int. J. Hydrogen Energ. 34: 4065 - 4073
  17. Maniecki, T.P.; Mierczynski, P.; Maniukiewicz, W.; Bawolak, K.; Gebauer, D.; Jozwiak, W.; 2009. Bimetallic Au-Cu, Ag-Cu/CrAl3O6 Catalysts for Methanol Synthesis. Catal. Lett. 130: 481-488
  18. Pattiya, A.; Titiloye, J.O.; Bridgwater, A.V. 2008. Fast pyrolysis of cassava rhizome in the presence of catalysts. J. Anal. Appl. Pyrolysis 81: 72-79
  19. Latha B.M.; Sadasivam, V.; Sivasankar, B.; 2007. A highly selective synthesis of pyrazine from ethylenediamine on copper oxide/copper chromite catalysts. Catal. Commun. 8: 1070-1073
  20. Hubaut, R.; Study of the Competitive Reactions between α-β-Unsaturated Aldehyde and Allylic Alcohol on a Copper Chromite Catalyst. 1992a. React. Kinet. Catalo Left. 46: 25-32
  21. Li Z.; and Flytzani-Stephanopoulos, M.; 1997. Cu-Cr-O and Cu-Ce-O Regenerable Oxide Sorbents for Hot Gas Desulfurization. Ind. Eng. Chem. Res. 36:187-196
  22. Chang, Y.; Tsen, H.; Chen, M.; and Lee, M.; 2001. A Study on The MOCVD Mechanism of Inverse Spinel Copper Ferrite Thin Films. Mat. Res. Soc. Spring Meeting, symposium U1.9
  23. Xiong, W.; Kale, G.M. 2006. High-selectivity mixed-potential NO2 sensor incorporating Au and CuO + CuCr2O4 electrode couple. Sensors Actuator B 119: 409-414
  24. Li, D.; Fang, X.; Dong, W.; Deng, Z.; Tao, R.; Zhou, S.; Wang, J.; Wang, T.; Zhao, Y.; and Zhu, X.; 2009. Magnetic and electrical properties of p-type Mn-doped CuCrO2 Semiconductors. J. Phys. D: Appl. Phys. 42: 055009 (6pp)
  25. Cui, H.; Zayat, M. and Levy, D. 2005. Sol-Gel synthesis of nanoscaled spinels using sropylene oxide as a gelation agent. J. Sol-Gel Sci. Technol. 35: 175-181
  26. Plyasova, L. M.; Molina, I. Yu.; Kriger, T. A.; Davydova, L. P.; Malakhov, V. V.; Dovlitova, L. S.; and Yur‟eva, T. M. 2001. V. Interaction of hydrogen with copper-containing oxide catalysts: v. structural transformations in copper chromite during reduction-reoxidation. Kinet. Catal. 42: 126-131
  27. Rioux, R.M.; and. Vannice, M.A. 2003. Hydrogenation/dehydrogenation reactions: isopropanol dehydrogenation over copper catalysts. J. Catal. 216: 362-376
  28. Kim, N. D.; Oh, S.; Joo, J. B.; Jung, K. S.; and Yi J. 2010. Effect of preparation method on structure and catalytic activity of Cr-promoted Cu catalyst in glycerol hydrogenolysis. Korean J. Chem. Eng. 27: 431-434
  29. Sansare, S.D. 1983. Studies on the poisoning of copper chromite catalyst by thiophene. Univ of Bombay, India
  30. Mohan, D. 2003. Automotive exhaust pollution control studies on carbon monoxide oxidation over base metal catalysts. Ph.D. Thesis, Banaras Hindu University, India
  31. Natesakhawat, M. 2005. Investigation of active sites and reaction networks in catalytic hydrogen production: steam reforming of lower alkanes and the water-gas shift reaction. Degree Doctor of Philosophy in the Graduate School of the Ohio State University
  32. Chiu, C-W. 2006. Catalytic conversion of glycerol to propylene glycol: synthesis and technology assessment, Ph.D. Thesis, Faculty of the Graduate School University of Missouri- Columbia
  33. Dasari, M.A.; 2006. Catalytic conversion of glycerol and sugar alcohols to value-added products. Ph.D. Thesis, Faculty of the Graduate School University of Missouri-Columbia
  34. Frainier, L.J.; Herman, H. US Patent 1981.Fineberg; Copper chromite catalyst for preparation of furfuryl alcohol from furfural. Patent No.: 4,251,396
  35. Strom, R.M.; US Patent 1982. Copper chromite catalyst for oxidative coupling phenols. Patent No.: 4,354,048,1982
  36. Chaudhari, R.V.; Jaganathan, R.; Chaudhari, S.T.; Rode, C.V. US Patent 2006. Process for the preparation of copper chromite catalyst. Patent No. 7,037,877B1
  37. Barnicki, S.D.; Gustafson, B.L.; Liu, Z.; Perri, S.T.; Worsham, P.R. US Patent 2008. Ruthenium-Copper chromite hydrogenation catalyst. Patent No.: US 2008/0194398A1
  38. Barnicki, S.D.; Gustafson, B.L.; Liu, Z.; Perri, S.T.; Worsham, P.R. US Patent 2008. Palladium-Copper chromite hydrogenation catalyst. Patent No.: US 2008/0194398A1
  39. Pramottana, M.; Praserthdam, P.; and Ngamsom, B. 2002. Copper chromite catalyst for the selective hydrogenation of furfural to furfuryl alcohol. J. Chin. Inst. Chem. Engrs. 33: 477-481
  40. Huang, X.; Cant, N.W.; Wainwright, M.S.; Ma, L. 2005. The dehydrogenation of methanol to methyl formate Part I: Kinetic studies using copper-based catalysts. Chem. Eng. Processing 44: 393-402
  41. Solov‟ev, S.A.; and Orlik, S. N. 2009. Structural and functional design of catalytic converters for emissions from internal combustion engines. Kinet. Catal. 50: 705-714
  42. Nishimura, S. Handbook of Heterogeneous Catalytic Hydrogenation for Organic Synthesis. John Wiley & Sons, Inc. NewYork. 2001
  43. Choudhary, V.R.; and Pataskar, S.G. 1979. Thermal Analysis of Ammonium Copper Chromate. J. Thermal Anal. 17: 45-56
  44. Adkins, H.; Connor, R. 1931. The catalytic hydrogenation of organic compounds over copper chromite. J. Am. Chem. Soc. 53: 1091-1095
  45. Liawa, B.J.; Chen, Y.Z. 2000. Catalysis of ultrafine CuB catalyst for hydrogenation of olefinic and carbonyl groups. Appl. Catal. A: Gen. 196: 199-207
  46. Hubaut, R.; Bonnelle, J.P.; and Daage, M. 1989. Selective hydrogenation of heavy polyunsaturated molecules on copper-chromium catalysts. J. Molec. Catal. 55: 170-183
  47. Narasimhan, V.; Patnaik, P.; and Ramamurthy, S. 1987. Proc. 8th Nat. Syrup. on Catalysis, Sindri February, India
  48. Hubaut, R.; Daage, M.; and Bonnelle, J.P.; 1986. Selective hydrogenation on copper chromite catalysts. Appl. Catal. 22: 243- 255
  49. Bezelgues, J-B.; Dijkstra A.J. 2009. Formation of trans fatty acids during catalytic hydrogenation of edible oils. In: Destaillats, F.; Se´be´dio, J-L.; Dionisi, F.; Chardigny, J-M. (eds). Trans fatty acids in human nutrition. The Oily Press, Bridgwater: 43-64
  50. Beers, A.; Mangnus, G.; 2004. Hydrogenation of edible oils for reduced trans-fatty acid content. Inform 15: 404-405
  51. Rangel, E.R. 2005. Contribution to the Study of Heterogeneous Catalytic Reactions in SCFs: Hydrogenation of Sunflower Oil in Pd Catalysts at Single-Phase Conditions. Ph.D. Thesis, Universitat Politècnica de Catalunya, France
  52. Alonzo, L.; Fraga, M.J.; Juarez, M. 2000. Determination of trans Fatty Acids in Margarines Marketed in Spain. J. Am. Oil Chem. Soc. 77: 131-136
  53. List, G.R. 2004. Decreasing trans and Saturated Fatty Acid Content in Food Oils. Food Technol. 58: 23-31
  54. Satchithanandam, S.; Oles, C.J.; Spease, C.J.; Brandt, M.M.; Yurawecz, M.P.; Rader, J.I. 2004. Trans, Saturated and Unsaturated Fat in Foods in the United States Prior to Mandatory trans-fat Labeling. Lipids. 39: 11-18
  55. Tarrago-Trani, M.T.; Phillips, K.M.; Lamar, L.E.; Holden, J.M. 2006. New and Existing Oils and Fats Used in Products with Reduced trans Fatty Acid Content. J. Am. Dietetic Assoc. 106: 867-880
  56. Floter, E.; Van Dujin, G. 2006. Trans free fats for use in food. In Modifying Lipids for use in foods. F.D. Gunstone, Ed., Woodhead Publishing Ltd.: Cambridge, England, 492-443
  57. Annemarie ,E.W.; and Beers Beers. 2007. Low trans hydrogenation of edible oils. Lipid Technol. 9(3): 56-58
  58. Koritala, S.; Butterfield, R.O.; Dutton, H.J. 1973. Kinetics of hydrogenation of conjugated triene and diene with nickel, palladium, platinum and copper-chromite catalysts. J Am Oil Chem Soc 50: 317-320
  59. Koritala, S; and Dutton, H.J. 1969. Selective Hydrogenation of Soybean Oil. IV. Fatty Acids Isomers Formed With Copper Catalysts. J. Am. Oil Chem. Soc. 46: 245-248
  60. [60] Kirschner, E.; and Lowrey, E.R. 1970. J. Am. Oil Chem. Soc. 47: 467
  61. Mounts, T.L.; Koritala, S.; Friedrich, J.P.; and Dutton, H.J. 1978..Selective hydrogenation of soybean oil: IX. Effect of pressure in copper catalysis. J. Am. Oil Chem. 55: 402-406
  62. Johansson, L.E. 1979. Copper Catalysts in the Selective Hydrogenation of Soybean and Rapeseed Oils: III. The Effect of Pressure when using Copper Chromite Catalyst. J. Am. Oil Chem. Soc. 56: 987-991
  63. Koritala, S.; Friedrich, J.P.; and Mounts, T.L. 1980. Selective Hydrogenation of Soybean Oil: X. Ultra High Pressureand Low Pressure. J. Am. Oil Chem. 57: 1-5
  64. Johansson, L.E.; and Lundin, S.T. 1979. Copper Catalysts in the Selective Hydrogenation of Soybean and Rapeseed Oils: I. The Activity of the Copper Chromite Catalyst. J. Am. Oil Chem. Soc. 56: 974-980
  65. Miya, B.; Hoshino, F.; and lwasa,I. 1966. Studies on the copper chromite catalyst: III. Increase in the activity of the copper chromite catalyst by the water-gas reaction. J. Catal. 5: 401-411 (1966)
  66. Moulton, K.J.; Beal, R.E.; and Griffin, E.L.; 1971. Hydrogenation of Soybean Oil With Commercial Copper-Chromite and Nickel Catalysts: Winterization of Low-Linolenate Oils. J. Am. Oil Chem. Soc. 48: 499-502
  67. Gray, S.I.; and Russell, L.F. 1979. J. Amer. Oil.Chem. Soc. 56: 36
  68. Cowan, J.C.; Koritala, S.; Warner, K.; List, G.B.; Moulton, K.J.; and Evans, C.D. 1973. Copper-Hydrogenated Soybean and Linseed Oils: Composition, Organoleptic Quality and Oxidative Stability. J. Amer. Oil Chem. Soc. 50(5): 132-136
  69. Fragale, C.; Gargano, M.; and Rossi, M.; 1982. Catalytic Hydrogenation of Vegetable Oils: II. The activity of the Prereduced Copper Chromite Catalyst. J. Am. Oil Chem. Soc. 59: 465-469
  70. Capece, F.M.; Castro, V.D.; Furlani, C.; Mattogno, G.; Fragale, C.; Gargano, M.; and, Rossi, M.; 1982. Copper chromite Catalysts: XPS structure elucidation and correlation with catalytic activity. J Electron Spectro. 27(2): 119-128
  71. Rieke, R.D.; Thakurb, D.S.; Robertsb, B.D.; and White, G.T.; 1997. Fatty Methyl Ester Hydrogenation to Fatty Alcohol Part I: Correlation between catalyst properties and activity/selectivity. J Am Oil Chem Soc. 74: 333-339
  72. Szukalska, E.; and Drozdowski, B. 1982. Selective Hydrogenation of Rapeseed Oils with Copper-Chromite Catalyst: Influence of Erucic Acid. J. Am. Oil. Chem. Soc. 59(3): 134 -139
  73. Lazier, W. A.; and Arnold, H. R. 1965. Organic Synthesis, Vol. II (John Wiley & Sons Inc, New York): 142
  74. Rao M.V.R.K. 1965. Hydrogenation of Aromatic Compounds. Suppl. Def. Sci. J: 131-136
  75. Pandey, A. 1997. Studies on Adkin‟s catalysts and their performance in vapour phase hydrogenation of nitrobenzene to aniline. Ph.D Thesis. Dept. Of Chem. Eng. and Technol, Banaras Hindu University, India
  76. Eley, D.D. 1968. Advances in Catalysis Vol. 18, Academic press inc. NY (London) Ltd
  77. Mo¨bus, K.; Wolf, D.; Benischke, H.; Dittmeier, U.; Simon, K.; Packruhn, U.; Jantke, R.; Weidlich, S.; Weber, C.; Chen, B. 2010 . Hydrogenation of Aromatic Nitrogroups with Precious metal powder catalysts: Influence of Modifier on Selectivity and Activity. Top Catal. 53:1126-1131
  78. Wknlak, J.; and Klein, M. 1984. Reduction of Nitrobenzene to Aniline. Ind. Eng. Chem. Prod. Res. Dev. 23(1): 44-50
  79. Choudhary, V.R.; Sansare, S.D.; Thite, G.A. 1988. Adsorption of Reaction Species for Hydrogenation of Nitrobenzene on Copper Chromite at Catalytic Conditions. J. Chem. Tech. Biotechnol. 42: 249-260
  80. Fang, X.; Yao, S.; Qing, Z.; Li, F. 1997. Study on silica supported Cu-Cr-Mo nitrobenzene hydrogenation catalysts. Appl. Catal. A: Gen. 161: 129-135
  81. Keki, H.; Ghardal and Sliepcevich, C.M. 1960. Copper catalysts in hydrogenating nitrobenzene to aniline. Ind. Eng. Chem. 52 (5): 417-420
  82. Jebarathinam, N.; Eswaramoorthy, M.; Krishnasamy, V.; 1996. Effect of substitution of Fe3+ in CuCr2O4 matrix for the hydrogenation of nitrobenzene. React. Kin. Catal. Lett. 58: 291-298
  83. Wiegers, W.J.; Spencer, M.A; Schreiber, W.L. 1986. Process for preparing mixture containig 2-campholenylidenbutanol, Product produced thereby and perfumery uses thereof. US Patents 4,619,781
  84. Giersch, W.K.; Ohloff, G. 1989 Bicylclic aliphatic alcohols and their utilization as perfuming ingredients. US Patents 4,818,747
  85. Shapiro, S. H. 1968. Fatty Acids and Their Industrial Applications, Marcel Dekker, Inc., New York: 123-128
  86. Billenstein, S.; and Blaschke, G. 1984. Industrial Production of Fatty Amines and Their, Derivatives. J. Amer. Oil Chem. Soc. 61: 353-357
  87. Gervajio, G.C. 2005. Fatty Acids and Derivatives from Coconut Oil. Bailey’s Industrial Oil and Fat Products, Sixth Edition, Six Volume Set. John Wiley & Sons, Inc
  88. Adkins, H. Reactions of Hydrogen with Organic Compounds over Copper-Chromium Oxide and Nickel Catalysts; Univ. Wisconsin Press: Madison, 1937; p 50
  89. Huang, W.; Li, H.; Zhu, B.; Feng, Y.; Wang, S.; Zhang, S. 2007. Selective hydrogenation of furfural to furfuryl alcohol over catalysts prepared via sonochemistry. Ultrason. Sonochem. 14: 67-74
  90. Yurieva, T.M.; 1999. Mechanisms for activation of hydrogen and hydrogenation of acetone to isopropanol and of carbon oxides to methanol over copper-containing oxide catalysts. Catal. Today 51: 457-467
  91. Kang, H-C.; Lee, S-H.; Park, J-M.; Kim, D-P.; and Lee, B.M. 2009. Hydrogenation of Methyl Dodecanoate Using Copper Chromite. J. Korean Ind. Eng. Chem. 20(2): 201-207
  92. Shreiber, E.H.; Roberts, G.W.; 2000. Methanol dehydrogenation in a slurry reactor: evaluation of copper chromite and iron/titanium catalysts. Appl. Catal. B: Env. 26: 119-129
  93. Minyukova, T.P.; Simentsova, I.I.; Khasin, A.V.; Shtertser, N.V.; Baronskaya, N.A.; Khassin, A.A.; Yurieva, T.M.; 2002. Dehydrogenation of methanol over copper-containing catalysts. Appl Catal A: Gen. 237: 171-180
  94. Tonner, S.P.; Wainright, M.S.; Trimm, D.L.; Cant, N.W. 1984. Characterization of copper chromite catalysts for methanol dehydrogenation. Appl. Catal. 11: 93-101
  95. Rao, V.M.; Shankar, V. 1988. High activity copper catalyst for one-step conversion of methanol to methyl formate at low temperature. J. Chem. Tech. Biotechnol 42: 183-196
  96. Chono, M; Yamamoto, T. 1981. The synthesis of formaldehyde, methyl formate and hydrogen cynide. Shokubai 23(1): 3-8
  97. Tu, Y.J.; Chen, Y.W.; and Li, C.; 1994. Characterization of unsupported copper-chromium catalysts for ethanol dehydrogenation. J. Molec. Catal. 89(1-2): 179-18
  98. Chang, F-W.; Kuo, W.-Y.; Yang, H.-C. 2005. Preparation of Cr2O3-promoted copper catalysts on rice husk ash by incipient wetness impregnation. Appl. Catal. A: 288: 53-61
  99. Chang, F.W.; Yang, H.C.; Roselin, L.S.; Kuo, W.Y.; 2006. Ethanol dehydrogenation over copper catalysts on rice husk ash prepared by ion exchange. Appl. Catal. A: Gen. 304: 30-39
  100. Pillai, R.B.C.; 1994. A study of the preactivation of a copper chromite catalyst. Catal. Lett. 26: 365-371
  101. Mooney, J.J. 1994. Exhaust control, automotive, in: Kirk-Othmer Encyclopedia of Chemical Technology 9, 4th Edition,Wiley/Interscience, New York: 982
  102. Rao, U.R.; Rajinderkumar; and Kuloor, N.R. 1969. Dehydrogenation of butyl alcohol in fixed catalyst beds. I&EC process design and develop. 8: 9-16
  103. Wang Z.; Ma H.; Zhu W.; Wang G. 2002. Characterization of Cu-ZnO-Cr2O3/SiO2 catalysts and application to dehydrogenation of 2-butanol to 2-butanone. React. Kinet. Catal. Letters 76 (2): 271-279(9)
  104. Shiau, C.Y.; Lee, Y.R. 2001. Characterization and dehydrogenation activity of Cr-added electroless plated copper catalyst. Appl. Catal..A: Gen. 220: 173-180
  105. Crivello, M.; Pe´rez, C.; Ferna´ndez, J.; Eimer, J.; Herrero, E.; Casuscelli, S.; Rodrı´guez-Castello´n, E. 2007. Synthesis and characterization of Cr/Cu/Mg mixed oxides obtained from hydrotalcite-type compounds and their application in the dehydrogenation of isoamylic alcohol. Appl. Catal. A: Gen. 317: 11-19
  106. Liang, C.; Ma, Z.; Ding, L.; Qiu, J. 2009. Template Preparation of Highly Active and Selective Cu–Cr Catalysts with High Surface Area for Glycerol Hydrogenolysis. Catal. Lett. 130: 169-176
  107. Behr, A.; Eilting, J.; Irawadi, K.; Leschinski, J.; and Lindner, F.; 2008. Improved utilisation of renewable resources: New important derivatives of glycerol. Green Chem.10: 13-30
  108. Yang, L.; Joo, J.B.; Kim, Y.J.; Oh, S.; Kim, N.D.; and Yi, J. 2008. Synthesis of superacidic mesoporous alumina and its application in the dehydration of glycerol. Korean J. Chem. Eng. 25: 1014- 1017
  109. Song, S.H.; Lee, S.H.; Park, D. R.; Kim, H.; Woo, S.Y.; Song, W. S.; Kwon, M. S.; and Song, I.K. 2009. Direct preparation of dichloropropanol from glycerol and hydrochloric acid gas in a solvent-free batch reactor: Effect of experimental conditions. Korean J. Chem. Eng., 26: 382-386
  110. Dasari, M.A.; Kiatsimkul, P.; Sutterlin, W.R.; Suppes, G.J.; 2005. Low-pressure hydrogenolysis of glycerol to propylene glycol. Appl. Catal. A: Gen. 281: 225-231
  111. Chiu, W.; Dasari, M.A.; Sutterlin, W.R.; and Suppes, G.J.; 2006. Removal of Residual Catalyst from Simulated Biodiesel‟s Crude Glycerol for Glycerol Hydrogenolysis to Propylene Glycol. Ind. Eng. Chem. Res. 45: 791-795
  112. Chiu, C-W.; Tekeei, A.; Ronco, J.M.; Banks, M-L.; and Suppes, G.J. 2008. Reducing Byproduct Formation during Conversion of Glycerol to Propylene Glycol. Ind. Eng. Chem. Res. 47: 6878-6884
  113. Dovell, F. S.; and Greenfield, H.; 1962. Copper chromite catalysts forreductive alkylation. I & E C Product Research and Development. 1(3): 179-181
  114. Ward, S.; Lamb, S. A.; Hodgson: M. A. E. (to ICI). Brix. Patent 712,100 (July 21, 1954); Ward, S., Lamb, S. A. (to ICI), Brit. Patent 716,239 (1954)
  115. Tsushima, R. 1997. Surfactants products from oleochemicals. Inform 8: 362-365
  116. Hark, S. V. D.; Härröd, M. 2001 Hydrogenation of oleochemicals at supercritical single-phase conditions: influence of hydrogen and substrate concentrations on the process. Appl. Catal. A: Gen. 210: 207-215
  117. Choudhary, V.R.; Dumbre, D.K.; Uphade, B.S.; Narkhede, V.S. 2004. Solvent-free oxidation of benzyl alcohol to benzaldehyde by tert-butyl hydroperoxide using transition metal containing layered double hydroxides and/or mixed hydroxides. J Mole Catal A: Chem. 215: 129-138
  118. George, K.; Sugunan, S.; 2008. Catalytic oxidation of cyclohexane over Cu-Zn-Cr ternery spinel system. React. Kinet. Catal. Lett. 94(2): 252-260
  119. Barman, S.; Acharya, N.C.P.A.; Pramanik, P. 2006. Kinetics of Reductive Isopropylation of Benzene with acetone over Nano-Copper Chromite-Loaded H-Mordenite. Ind. Eng. Chem. Res. 45: 3481-3487
  120. Pillai, R. B. C. 1994. Reductive alkylation of aniline over copper chromite catalyst: optimization of reaction conditions. Indian J. Chem. Sec. A, 33A (10): 941-943
  121. Pillai, R. B. C. 1993. References and further reading may be available for this article. To view references and further reading you must purchase this article.Synthesis of secondary amines by reductive alkylation using copper chromite catalyst: Steric effect of carbonyl compounds. J. Molec. Catal. 84(1): 125-129
  122. Rudolf, Z.; Paul, N.; Gerhard, F.; Herbert, D.1997: U.S. Patent 5639886
  123. Moree, W.J.; Ramirez-Weinhouse, M.M.; Shiota, T.; Imai, M.; Sudo, M.; Tsutsumi, T.;Endo, N.; Muroga, Y.; Hada, T.; Tanaka, H.; Morita, T.; Greene, J.; Barnum, D.; Saunders, J.; Kato, Y.; Myers, PL.; Tarby, CM. 2004. Small molecule antagonists of the CCR2b receptor. Part 2: Discovery process and initial structure-activity relationships of diamine derivatives. Bioorg. Med. Chem. Lett. 14: 5413
  124. Bai, G.; Li, Y.; Yan, X.; He, F.; and Chen, L. 2004. High efficiency cu-based catalysts for the cyclization of alkanolamines. React. Kinet. Catal. Lett. 82(1): 33-39
  125. Moss, P.H.; Bell, N. 1962. US Patent 3037023
  126. Armor, J.N.; 1999. The multiple roles for catalysis in the production of H2. Appl. Catal. A: Gen. 176: 159-176
  127. Baykara S.Z. 2004. Hydrogen production by direct solar thermal, decomposition of water, possibilities for improvement of process efficiency. Int J Hydrogen Energ. 29:1451-8
  128. Marshall, A.; Sunde, S.; Tsypkin, M.; and Tunold, R. 2007. Performance of a PEM water electrolysis cell using IrxRuyTazO2 electocatalysts for the oxygen evolution electrode. Int. J. Hydrogen Energy 32: 2320-2324
  129. Saadi, S.; Bouguelia, A.; Trari, M. 2006. Photocatalytic hydrogen evolution over CuCrO2. Sol. Energy 80: 272-280
  130. Brahimi, R.; Bessekhouad, Y.; Bouguelia, A.; Trari, M.; 2007. CuAlO2/TiO2 heterojunction applied to visible light H2 production. J. Photochem. Photobiol. A: Chem. 186: 242-247
  131. Zhang, P.; Chen, S.Z.; Wang, L.J.; Xu, J.M.; 2010. Overview of nuclear hydrogen production research through iodine sulfur process at INET. Int. J. Hydrogen Energy 35: 2883-2887
  132. Tagawa H.; and Endo T.; 1989. Catalytic decomposition of sulfuric acid using metal oxides as the oxygen generating reaction in thermochemical water splitting process. Int. J. Hydrogen Energy 14(1): 11-17
  133. Bond, G.C. (Ed.), 2005. Metal-catalyzed Reactions of Hydrocarbons, Springer, New York, NY,
  134. Rostrup-Nielsen, J.R.; 2001. Conversion of hydrocarbons and alcohols for fuel cells. Phys. Chem. Chem. Phys. 3: 283-288
  135. Hohn, K. L.; and Lin. Y-C.; 2009. Catalytic Partial Oxidation of Methanol and Ethanol for Hydrogen Generation. Chem. Sus. Chem. 2: 927-940
  136. Prasad. R.1984. Syudies on compression moulded copper based catalysts and their performance in dehydrogenation of ethanol. Ph.D. Thesis, Banaras Hindu University, India
  137. Cheng, W.H.; Kung, H.H.; Cheng, W.H.; Kung, H.H. (Eds.), 1994. Methanol Production and Use, Chap. 1, Marcel Dekker, New York,
  138. Cheng, W.H. 1999. Development of Methanol Decomposition Catalysts for Production of H2 and CO. Acc. Chem. Res., 32: 685-691
  139. Yoon, H.; Stouffer, M.R.; Dubt, P.J.: Burke, F.P.; Curran, G.P. 1985. Methanol Dissociation for Fuel Use. Energy Prog. 5: 78-83
  140. Pattersson, L.; Sjostrom, K. 1991. Decomposed Methanol as a Fuel-a Review. Combust. Sci. Technol. 80: 265-303
  141. Carrette, L.; Friedrich, K.A.; Stimming, U. 2001. Fuel Cells: Fundamentals and Applications. Fuel Cells 1(1): 5-38
  142. Ma, L.; Gong, B.; Tran, T.; Wainwright, M.S.; 2000. Cr2O3 promoted skeletal Cu catalysts for the reactions of methanol steam reforming and water gas shift. Catal. Today 63: 499-505
  143. Ho¨hlein, B.; Boe, M.; Bogild-Hansen, J.; Bro¨ckererhoff, P.; Colsman, G.; Emonts, B.; Menzer, R.; Riedel, E.; 1996. Hydrogen from methanol for fuel cells in mobile systems: development of a compact reformer. J. Power Sources 61: 143-147
  144. de Wild, P.J.; Verhaak, M.J.F.M.; 2000. Catalytic production of hydrogen from methanol. Catal. Today 60: 3-10
  145. Huang, X.; Ma, L.; Wainwright, M.S. 2004. The influence of Cr, Zn and Co additives on the performance of skeletal copper catalysts for methanol synthesis and related reactions. Appl. Catal. A: Gen. 257: 235-243
  146. Cheng, W-H.; Chen, I.; Liou, J.-S.; and Lin, S-S.; 2003. Supported Cu catalysts with yttria-doped ceria for steam reforming of methanol. Top Catal. 22: 3-4
  147. Chen, W-S.; Chang, F-W.; Roselin, L.S.; Ou, T-C.; Lai, S-C.; 2010. Partial oxidation of methanol over copper catalysts supported on rice husk ash. J. Mol. Catal. A: Chem. 318: 36-43
  148. Reuse, P.; Renken, A.; Haas-Santo, K.; Go¨rke, O.; Schubert, K.; 2004. Hydrogen production for fuel cell application in an autothermal micro-channel reactor. Chem. Eng. J. 101: 133-141
  149. Navarro, R.M.; Pena, M.A.; Merino, C.; Fierro, J.L.G.; 2004. Production of hydrogen by partial oxidation of methanol over carbon-supported copper catalysts. Top. Catal. 30/31: 481-486
  150. Wang, Z.; Xi, J.; Wang, W.; Lu, G.; 2003. Selective production of hydrogen by partial oxidation of methanol over Cu/Cr catalysts. J. Mol. Catal. A: Chem. 191: 123-134
  151. Horny, C.; Renken, A.; Kiwi-Minsker, L.; 2007. Compact string reactor for autothermal hydrogen production. Catal. Today 120: 45-53
  152. Bion, N.; Epron, F.; and Duprez, D. 2010. Bioethanol reforming for H2 production a comparison with hydrocarbon reforming. Catalysis 22: 1-55
  153. Ioannides, T.; and Neophytides, S.; 2000. Efficiency of a solid polymer fuel dell operating on ethanol. J. Power Sources 91: 150-156
  154. Casanovas, A.; Roig, M.; de Leitenburg, C.; Trovarelli, A.; Llorca, J.; 2010. Ethanol steam reforming and water gas shift over Co/ZnO catalytic honeycombs doped with Fe, Ni, Cu, Cr and Na. Int. J. Hydrogen Energy 35: 7690-7698
  155. Fatsikostas, A.; Kondarides, D.; and Verykios, X.; 2001. Steam Reforming of Biomass-Derived Ethanol for the production of Hydrogen for Fuel Applications. Chem. Commun. 9: 851-852
  156. Salge, J.R.; Deluga, G.A.; Schmidt, L.D. 2005. Catalytic partial oxidation of ethanol over noble metal catalysts. J. Catal. 235:69-78
  157. Chen H.; Yu, H.; Tang, Y.; Pan, M.; Yang, G.; Peng, F.; Wang, H.; Yang, J. 2009. Hydrogen production via autothermal reforming of ethanol over noble metal catalysts supported on oxides. J. Nat. Gas Chem. 18: 191-198
  158. Al-Hamamre, Z.; Hararah M.A. 2010. Hydrogen production by thermal partial oxidation of ethanol: Thermodynamics and kinetics study. Int. J. Hydrogen Energy 35: 5367-5377
  159. Dolgykh, L.Y.; Stolyarchuk, I. L.; Deynega, I.V.; and Strizhak, P.E.; 2005. Use of industrial dehydrogenation catalysts for the hydrogen production from bioethanol. Proceedings International Hydrogen Energy Congress and Exhibition IHEC 2005: 13-15
  160. Tanaka Y.; Takeguchi T.; Kikuchi R.; Eguchi K.; 2005. Influence of preparation method and additive for Cu-Mn spinel oxide catalyst on water gas shift reaction of reformed fuels. Appl. Catal. A: Gen. 279: 59-66
  161. Kusˇar, H.; Hocˇevar S.; Levec J.; 2006. Kinetics of the water-gas shift reaction over nanostructured copper-ceria catalysts. Appl. Catal. B: Environ. 63: 194-200
  162. Trimm D.L. 2005. Minimisation of carbon monoxide in a hydrogen stream for fuel cellapplication. Appl. Catal. A:Gen. 296: 1-11
  163. Tanaka, Y.; Utaka, T.; Kikuchi, R.; Sasaki, K.; Eguchi, K. 2003. Water gas shift reaction over Cu-based mixed oxides for CO removal from the reformed fuels. Appl. Catal. A: Gen. 242: 287-295
  164. Prasad, R.; Kennedy, L.A.; and Ruckenstein, E. 1984. Catalytic combustion. Catal. Rev. Sci. Eng. 26: 1-58
  165. Arai, H.; and Machida, M.; 1991. Recent progress in high temperature catalytic combustion. Catal. Today 10: 81-95
  166. Bosch, H.; and Janssen, F.; 1987. Formation and control of nitrogen oxides. Catal. Today 2 :369-379
  167. Eguchi, K.; and Arai, H.; 1996. Recent advances in high temperature catalytic combustion. Catal. Today 29: 379-386
  168. Burch, R.; and Loader, P.K.; 1994. Investigation of Pt/Al2O3 and Pd/Al2O3 catalysts for the combustion of methane at low concentrations. Appl. Catal. B: Env. 5: 149-164
  169. Sekizawa, K.; Eguchi, K.; Widjaja, H.; Machida, M.; and Arai, H. 1996. Property of Pd-supported catalysts for catalytic combustion. Catal. Today 28: 245-250
  170. Comino, G.; Gervasini, A.; and Ragaini, V.; 1997. Methane combustion over copper chromite catalysts. Catal. Lett. 48: 39-46
  171. Randy, B.; Kevin, C.; John, F.; Peter, A. F.; Lew, G.; Hunter, G.; Kent, H.; Mike, I. ; Mike, J.; David, K.; Rae, L.; David, L.; Marlene, L.; Lee, W.S.; Mark, S.; and Steve, W. 1996. Oxygenated gasoline. Motor Gasoline Technical Review 36: 45-53.7
  172. Chidambaram, V. Ph. D. Thesis. 2005. Evaluation of catalytic routes for the production of oxygenates from refinery feed stocks. Department of Chemistry, I.I.T. Madras, India
  173. Frey, S.J.; Schmidt, R.J.; Marker, T.L.; and Marinangeli, R.E.1998. Integrated process for producing diisopropyl ether, an isopropyl tertiary alkyl ether and isopropyl alcohol. U S Patent. 5, 705, 712
  174. Carlini, C.; Flego, C.; Marchionna, M.; Noviello, M.; Galletti, A.M.R.; Sbrana, G.; Basile, F.; Vaccari, A. 2004. Guerbet condensation of methanol with n-propanol to isobutyl alcohol over heterogeneous copper chromite/Mg-Al mixed oxides catalysts. J. Mol. Catal. A: Chem. 220: 215-220
  175. Kiennemann, A.; Irdris, H.; Hindermann, J.P.; Lavalley, J.C.; Vallet, A.; Chaumette, P.; Courty, Ph. 1990. Methanol synthesis on Cu/ZnAl2O4 and Cu/ZnOAl2O3 Catalysts: Influence of carbon monoxide pretreatment on the formation and concentration of formate species. Appl. Catal. 59:165-184
  176. Spencer M.S. 1987. Brass formation in copper-zinc catalysts. III. Surf Sci 192: 336-343
  177. Herwijnen, T.V.; De Jong, W.A. 1974. Brass formation in a copper/zinc oxide CO shift catalyst. J Catal 34: 209-214
  178. Jung K.D.; Joo O.S.; Han S.H.; Uhm S.J.; and Chung I.J. 1995. Catal. Lett. 35: 303
  179. Jung K.D.; and Joo O.S. 2002. Catal. Lett. 84: 21-25
  180. Venugopal, A.; Palgunadi, J.; Jung, K.D.; Joo, O.S.; Shin, C.H. 2008. Cu-Zn-Cr2O3 catalysts for Dimethyl Ether Synthesis: Structure and Activity Relationship. Catal. Lett. 123:142-149
  181. Fujimoto, K.; Asami, K.; Shikada, T.; Tominaga, H. 1984. Selective Synthesis of Dimethyl Ether from Synthesis Gas. Chem. Lett. 13 : 2051-2054
  182. Hansen, J.G; Voss, B.; Joensen, F.; Siguroardottir, I.D. 1995. SAE Technical Paper Series 950063
  183. Ohyama,S.; Kishida,H.; 1998 Physical mixture of CuO and Cr2O3 as an active catalyst component for low-temperature methanol synthesis via methyl formate. Appl. Catal. A: Gen. 172:241-247
  184. Nakamura, H.; Saeki, K.; Tanaka, M. 1988. Jpn. Patent 88/51129
  185. Tanaka, M.; Saeki, K. 1988. Jpn. Patent 88/51130
  186. Mahajan, D.; Sapienza, R.S.; Slegeir, W.A.; O'Hare, T.E. 1991. Homogeneous catalyst formulations for methanol production.U.S. Patent 4,992,480
  187. R.S. Sapienza, W.A. Slegeir, T.E. O'Hare, D. Mahajan, U.S. Patent 4,623,634 (1986)
  188. M. Marchionna, M. Lami, F. Ancillotti, R. Ricci, Ital. Patent 20028/A (1988)
  189. Onsager, O.T. Jpn. Patent 87/500867 (1987); 91/12048 (1991)
  190. P.AÊ . Sùrum, O.T. Onsager, in: Proc. 8th Int. Congr. On Catalysis, 2, 1984, 233
  191. Monti, D.M.; Kohler, M.A.; Wainwright, M.S.; Trimm, D.L.; Cant, N.W. 1986. Liquid phase hydrogenolysis of methyl formate in a semi batch reactor. Appl. Catal. 22: 123-136
  192. Palekar, V.M.; Jung, H.; Tierney, J.W.; Wender, I. 1993. Slurry phase synthesis of methanol with a potassium methoxide/copper chromite catalytic system. Appl. Catal. A 102: 13-34
  193. Palekar, V.M.; Tierney, J.W.; Wender, I. 1993. Alkali compounds and copper chromite as low-temperature slurry phase methanol catalysts. Appl. Catal. A 103: 105-122
  194. Gormley, R.J.; Rao, V.U.S.; Soong, Y.; Micheli, E. 1992. Methyl formate hydrogenolysis for low-temperature methanol synthesis. Appl. Catal. A 87: 81-101
  195. Trimm, D.L.; Wainwright, M.S. 1990. Steam reforming and methanol synthesis. Catal. Today 6: 261-278
  196. Ohyama, S.; 2003. Low-temperature methanol synthesis in catalytic systems composed of copper-based oxides and alkali alkoxides in liquid media: effects of reaction variables on catalytic performance. Top Catal. 22: 3-4
  197. Czernik, S.; Bridgwater, A.V.; 2004. Overview of Applications of Biomass Fast Pyrolysis Oil. Energy Fuels 18: 590-598
  198. Pattiya, A.; Titiloye, J.O.; Bridgwater, A.V. 2010. Evaluation of catalytic pyrolysis of cassava rhizome by principal component analysis. Fuel 89: 244-253
  199. Park, E. D.; Lee, D.; and Lee, H. C. 2009. Recent progress in selective CO removal in a H2-rich stream. Catal. Today 139: 280-290
  200. Cheng, W-H. 1996. Selective co oxidation in presence of H2. over Cu/Cr/Ba catalysts. React. Kinet. Catal. Lett. 58(2): 329-334
  201. Han, X.; Naeher, L.P. 2006. A review of traffic-related air pollution exposure assessment studies in the developing world. Environ. Int. 32: 106-120
  202. Kašpar, J.; Fornasiero, P.; Hickey, N. 2003. Automotive catalytic converters: current status and some perspectives. Catal. Today 77: 419-449
  203. Suresh, Y.; Sailaja Devi, M.M.; Manjari, V.; Das, U.N. 2000. Oxidant stress, antioxidants, and nitric oxide in traffic police of Hyderabad, India. Environ. Pollut. 109: 321-325
  204. Peters, A.; Liu, E.; Verier, R.I. 2000. Air pollution and incidence of cardiac arrhythmia. Epidemiology 11: 11-17
  205. Prasad, R.; and Bella, V.R. 2010. A Review on Diesel Soot Emission, its Effect and Control. Bull. Chem. React. Eng. Catal. 5(2): 69-86
  206. Miguel, A.H.; Eiguren-Fernandeza, A.; Jaquesa, P.A.; Froinesa, J.R.; Granta, B.L.; Mayo, P.R. 2004. Seasonal variation of the particle size distribution of polycyclic aromatic hydrocarbons and of major aerosol species in Claremon, California. Atmos. Environ. 38: 3241-51
  207. Gandhi, H.S.; Graham, G.W.; and McCabe, R.W. 2003. Automotive exhaust catalysis. J. Catal. 216: 433-442
  208. Acres, G.J.K.; and Harrison, B. 2004. The development of catalysts for emission control from motor vehicles: early research at Johnson Matthey. Top Catal. 28: 1-4
  209. Labhsetwar,N.; Biniwale, R.B.; Kumar,R.; Rayalu, R.; and Devotta, S. 2006. Application of supported perovskite-type catalysts for vehicular emission control. Catalysis Surveys from Asia 10 (1): 55-64
  210. Centi, G.; Arena, G.E.; and Perathoner, S. 2003. Nanostructured catalysts for NOx storage-reduction and N2O decomposition. J. Catal. 2003 216(1-2): 443-454
  211. Ferrandon, M. 2001. Mixed metal oxide-Noble metal catalyst for total oxidation of volatile organic matter and carbon monoxide. Ph. D. Thesis. Dept. of Chemical Engineering and Technology. Royal Institute of Technology, Stolkholm
  212. Stegenga, S.; Dekker, N.; Bijsterbosch, J.; Kapteijn, F.; Moulijn, J.; Belot, G.; Roche, R. 1991. Catalytic automotive pollution control without noble metals. In Catalysis and Automotive pollution Control II; Crucq, A., Ed.; Elsevier: Amsterdam. The Netherlands: 353-369
  213. Chien, C-C.; Chuang, W-P.; Huang, T-J. 1995. Effect of heat-treatment conditions on Cu-Cr/γ,-alumina catalyst for carbon monoxide and propene oxidation. Appl. Catal. A: Gen. 131: 73-87
  214. Kapteijn, F.; Stegenga, S.; Dekker, N.J.J.; Bijsterbosch, J.W.; Moulijn, J.A. 1993. Alternatives to Noble Metal Catalysts for Automotive Exhaust Purification. Catal. Today 16: 273-287
  215. Severino, F.; Brito,J.; Carías, O.; Laine, J. 1986. Comparative study of alumina-supported CuO and CuCr2O4 as catalysts for CO oxidation. J. Catal. 102: 172-179
  216. Vass, M.I.; Georgescu, V. 1996. Complete oxidation of benzene on Cu-Cr and Co-Cr oxide catalysts. Catal. Today 29: 463-470
  217. Dekker, F.H.M.; Dekker, M. C.; Bliek, A.; Kapteijn, F.; Moulijn, J. 1994. A. A transient kinetic study of carbon monoxide oxidation over copper-based catalysts for automotive pollution control. Catal. Today 20: 409.-422
  218. Rajesh, H.; Ozkan, U.S. 1993. Complete Oxidation of Ethanol, Acetaldehyde, and Ethanol/Methanol Mixtures over Copper Oxide and Copper-Chromium Oxide Catalysts. Ind. Eng. Chem. Res. 32: 1622.-1630
  219. Heyes, C. J.; Irwin, J. G.; Johnson, H. A.; Moss, R. L. 1982. The catalytic oxidation of organic air pollutants. Part 2. Cobalt molybdate and copper chromite catalysts. J. Chem. Technol. Biotechnol. 32: 1034-1041
  220. Subbanna, P.; Greene, H.; Desal, F. 1988. Catalytic oxidation of polychlorinated biphenyls in a monolithic reactor system. Environ. Sci. Technol 22: 557.-561
  221. Annual report by Committee on Medical and Biological Effects of Environmental Pollutants. 1977. Carbon Monoxide. Washington, D.C.: National Academy of Sciences (U.S.). ISBN 0-309-02631-8
  222. Wolf, P.C. 1971. Carbon Monoxide measurement and Monitoring in Urbon air. Env. Sci. Tech. 5(3): 212-218
  223. Severino, F.; and Laine, J. 1983. Effect of Composition and Pre-treatments on the Activity of Copper-Chromite-based Catalysts for Oxidation of Carbon Monoxide. Ind. Eng. Chem. Prod. Res. Dev. 22: 396-401
  224. Laine, J.; Brito, J.; and Severino, F. 1990. Surface Copper Enrichment by Reduction of Copper-Chromite Catalyst for Carbon Monoxide Oxidation. Catal. Letters 5: 45-54
  225. Pantaleo, G.; Liotta, L.F.; Venezia, A.M.; Deganello, G.; Ezzo, E.M.; Kherbawi, M.A. El; Atia, H. 2009. Support effect on the structure and CO oxidation activity of Cu-Cr mixed oxides over Al2O3 and SiO2. Mater Chem Phys 114: 604-611
  226. Xavier, K.O.;Rashid, K.K.A.; Sen,B.; Yusuff, K.K.M.; and Chacko, J. 1998. Support effects on Cu-Cr/Al2O3 catalysts for CO oxidation. Stud. Surf. Sci. Catal. 113: 821-828
  227. Hertl, W.; Farrauto, R.J. 1973. Mechanism of carbon monoxide and hydrocarbon oxidation on copper chromite. J. Catal. 29: 352-360
  228. Park, P. W.; and Ledford, J.S. 1998. Characterization and CO oxidation activity of Cu/Cr/Al2O3 catalysts. Ind. Eng. Chem. Res. 37: 887-893
  229. Li, W.; Cheng, H.; 2008. Bi2O3/CuCr2O4-CuO core/shell structured nanocomposites: Facile synthesis and catalysis characterization. J. Alloy Compound 448: 287-292
  230. Wedding, B.; Farrauto, R.J. 1974. Rapid Evaluation of Automotive Exhaust Oxidation Catalysts with a Differential Scanning Calorimeter. Ind. Eng. Chem. Process Des. Dev. 13 (1): 45-47
  231. Morgan, W. L.; Farrauto, R.J. 1973. Active sites on a copper chromite catalyst. J. Catal., 31(1): 140-142
  232. Severino, F.; Brito, J.L.; Laine, J.; Fierro, J.L.G.; López Agudo, A. 1988. Nature of Copper Active Sites in the Carbon Monoxide Oxidation on CuAl2O4 and CuCr2O4 Spinel Type Catalysts. J. Catal., 177(1): 82-95
  233. Prasad, R.; Rattan, G. 2009. Design of a Compact and Versatile Bench Scale Tubular Reactor. Bull. Chem. React. Eng. Catal., 4(1): 5-9
  234. Farrauto, R.J.; Wedding, B. 1973. Poisoning by SOx of some base metal oxide auto exhaust catalysts. J. Catal. 33: 249-255
  235. Stegenga, S.; van Soest, R.; Kapteijn, F.; Moulijn, J.A. 1993. Nitric oxide reduction and carbon monoxide oxidation over carbon-supported copper-chromium catalysts. Appl. Catal. B 2: 257-275
  236. Shelef, M.; Otto, K.; and Otto, N.C. 1978. Poisoning of automotive catalysts. Adv. Catal. 27: 311-65
  237. Bartholomew, C.H. 2001. Mechanisms of catalyst deactivation. Appl Catal A: Gen. 212: 17-60
  238. Kummer, J.T. 1980. Catalysts for automobile emission control. Prog. Energy. Combust. Sci. 66: 177-199
  239. Kim, Y-W.; Rhee, H-K.; Kim, Y-Y.; Choi, I-S. 1987. Deactivation of supported copper chromite catalyst by sulfur dioxide or water vapour. Hwahak Konghak 25(5): 454-459
  240. Lauder, A. 1975. Metal Oxide Catalytic Compositions. U.S. Patent 3897367
  241. Royer, S.; Duprez¸ D. 2011. Catalytic Oxidation of Carbon Monoxide over Transition Metal Oxides. Chem. Cat. Chem. 3: 24-65
  242. Hayakawa, K.; Tang, N.; Kameda, T.; and Toriba, A. 2007. Atmospheric Behaviors of Polycyclic Aromatic Hydrocarbons and Nitropolycyclic Aromatic Hydrocarbons in East Asia. Asian J. Atmos. Environ. 1(1): 19-27
  243. Hayakawa, K.; Murahashi, T.; Akutsu, K.; Kanda, T.; Tang, N.; Kakimoto, H.; Toriba, A.; and Kizu, R. 2000. Comparison of polycyclic aromatic hydrocarbons and nitropolycyclic aromatic hydrocarbons in airborne and automobile exhaust particulates. Polycycl. Aromat. Comp. 20 : 179-190
  244. Marr, L.C.; Kirchstetter, T.W.; Harley, R.A.; Miguel, A.H.; Hering, S.V.; and Hammond, S.K. 1999. Characterization of polycyclic aromatic hydrocarbons in motor vehicle fuels and exhaust emissions. Environ. Sci. Technol. 33: 3091-3099
  245. Oda, J.; Nomura, S.; Yasuhara, A.; and Shibamoto, T. 2001. Mobile sources of atmospheric polycyclic aromatic hydrocarbons in a roadway tunnel. Atmos. Environ. 35 : 4819-4827
  246. Zhou, J.; Xia, Q.-H.; Shen, S.-C.; Kawi, S.; and Hidajat, K. 2004. Catalytic oxidation of pyridine on the supported copper catalysts in the presence of excess oxygen. J. Catal. 225: 128-137
  247. Blaha, D.; Bartlett, K.; Czepiel, P.; Harriss, R.; Crill,Atmos, 1999. Natural and anthropogenic methane sources in New England. Environ. 33 (2): 243-255
  248. Su, S.; Beath, A.; Guo, H.; Mallet, C. 2005. An assessment of mine methane mitigation and utilization technologies. Prog. Energy Combust. Sci. 3: 123-170
  249. Kunimi, H.; Ishizawa, S.; Yoshikawa, Y. 1997. Three-dimensional air quality simulation study on low-emission vehicles in southern California. Atmos. Environ. 31 (2): 145-58
  250. Beer, T.; Grant, T.; Williams, D.; Watson, H. 2002. Fuel-cycle green housegas emissions from alternative fuels in Australian heavy vehicles. Atmos. Environ. 36 (4): 753-763
  251. Goyal, P.; Sidhartha. 2003. Present scenario of air quality in Delhi: a case study of CNG implementation. Atmos. Environ. 37 (38): 5423–5431
  252. Gambino, M.; Iannaccone, S.; Pidria, M.F.; Miletto, G.; Rollero, M.; 2004. in: World Automotive Congress F2 64-279
  253. Metz, B. 2001. Climate Change 2001: Mitigation: Contribution of Working Group III to the Third Assessment Report of the Intergovernmental Panel on Climate Change, Cambridge University Press, New York, 2001
  254. Sidwell, R.W.; Zhu, H.; Kee, R.J.; Wickham, D.T. 2003. Catalytic combustion of premixed methane-in-air on a high-temperature hexaaluminate stagnation surface Combust. Flame 134 (1-2): 55-66
  255. Hui, K.S.; Chao, C.Y.H.; Kwong, C.W.; Wan, M.P. 2008. Use of multi-transition-metal-ion-exchanged zeolite 13X catalysts in methane emissions abatement. Combust. Flame 153: 119-129
  256. Ismagilov, I.Z.; Ekatpure, R.P.; Tsykoza, L.T.; Matus, E.V.; Rebrov, E.V.; de Croon, M.H.J.M.; Kerzhentsev, M.A. ; Schouten, J.C. 2005. Optimization of anodic oxidation and Cu-Cr oxide catalyst preparation on structured aluminum plates processed by electro discharge machining. Catal. Today 105: 516-528
  257. Harrison, P.G.; Lloyd, N.C.; and Azelee, W. 1995. Non-noble metal environmental catalysts: Synthesis, characterization and catalytic activity. Stud. Surf. Sci. Catal. 96: 487-496
  258. Price, D.; Birnbaum, R.; Batiuk, R.; McCullough, M.; Smith, R. 1997. Nitrogen Oxides: Impacts on Public Health and the Environment; EPA-452/R-97-002 (NTIS PB98-104631); U.S. Environmental Protection Agency, Office of Air and Radiation: Washington, DC
  259. Russo, N.; Fino, D.; Saracco, G.; Specchia, V. 2007. N2O catalytic decomposition over various spinel-type oxides. Catal. Today 119:228-232
  260. Amin, N.A.S.; Tan, E.F.; and Manan, Z.A. 2004. SCR of NOx by C3H6: comparison between Cu/Cr/CeO2 andCu/Ag/ CeO2 catalysts. J. Catal. 222: 100-106
  261. Kramlich, J.C.; Linak, W.P.; 1994. Prog. Nitrous oxide behaviour in the atmosphere, and in combustion and industrial systems. Energy Combust. Sci. 20: 149-202
  262. Wojtowicz, M.A.; Pels, J.R.; Moulijn, J.A.; 1993. Combustion of coal as a source of N2O emission. Fuel Proc. Technol. 34: 1-71
  263. Sloss, L.L.; Hjalmarsson, A.-K.; Soud, H.N.; Campbell, L.M.; Stone, D.K.; Shareef, G.S.; Emmel, T.; Maibodi, M.; Livengood, C.D.; Markussen, J. 1992. Nitrogen oxides control Technology fact book, Noyes Data Corporation, Park Ridge, NJ, USA: 8-14
  264. Cabot, A.; Marsal, A.; Arbiol, J.; Morante, J.R. 2004. Bi2O3 as a selective sensing material for NO detection. Sens. Actuators B 99: 74-99
  265. Parvulescu, V.I.; Grange, P.; Delmon, B. 1998. Catalytic removal of NO. Catal. Today 46: 233-316
  266. Manney, G.L.; Froidevaux, L.; Waters, J.W. ; Zurek, R.W. ; Read, W.G.; Elson, L.S.; Kumer, J.B.; Mergenthaler, J.L.; Roche, A.E.; O'Nelll, A.; Harwood, R.S.; MacKenzie, I.; Swinbank, R.; Nature 370: 429; J. Kramlik, W.P. Linak, Prog. Energy Combust. Sci. 20: 149
  267. Armor, J.N. 1992. Environmental Catalysis. Appl. Catal. B: Environ. 1: 221-256
  268. White Paper: 1989. Selective Catalytic Reduction Controls to Abate NOx Emissions. Industrial Gas Cleaning Institute, Inc., Washington, D.C
  269. Shelef, M.; Gandhi, V. 1974. Ammonia formation in the catalytic reduction of nitric oxide. Ind. Eng. Chem. Prod. Res. Dev. 13: 80-85
  270. Tarasov, A.L.; Osmanov, M.O.; Shvets, V.A.; Kazanskii, V.B. 1990. IR spectroscopic study of absorbed NO and CO, state of Cu-Cr/Al2O3 catalyst surface, and mechanism of reduction of NO by carbon monoxide. Kinet. Catal. 31: 565-571
  271. Lee, C.-Y.; Jung, T.-H.; Ha, B.-H. 1996. Characteristics of CuO-CrO,/mordenite and its catalytic activity for combustion and NO decomposition. Appl. Catal. B 9: 77-91
  272. Xu, X-L.; Chen, Z-K.; Chen, Z-N.; Li, J-Q.; Li, Y. 2008. Theoretical and Computational Developments Interaction of CO and NO with the spinel CuCr2O4 (100) surface: A DFT study. Int J Quantum Chem 108(9): 1435-1443
  273. Jie-Chung, L.; Hung-Wen, Y.; Chien-Hung, L. 2009. Preparing Copper/Manganese Catalyst by Sol–Gel Process for Catalytic Incineration of VOCs. Aerosol Air Quality Res. 9: 435-440
  274. Salvatore, S.; Simona, M.; Carmelo, C.; Cristina, S.; Alessandro, P. 2003. Catalytic combustion of volatile organic compounds on gold/cerium oxide catalysts. Appl. Catal. B: Env. 40: 43-49
  275. Chai, K.S.; Geun, S.W. 2009. Properties and performance of Pd based catalysts for catalytic oxidation of volatile organic compounds. Appl. Catal. B: Env. 92: 429-436
  276. Bum, K.S.; Tae, H.H.; Chang, H.S. 2002. Photocatalytic degradation of volatile organic compounds at the gas-solid interface of a TiO2 photocatalyst. Chemosphere 48: 437-444
  277. Hazard Evaluation System and Information Service, Dept. of Health Services. www.dhs.ca.gov/ohb/ HESIS/toluene.htm, 2007
  278. Gervasini, A.; Vezzoli, G.C.; Ragaini, V. 1996. VOC removal by synergic effect of combustion catalyst and ozone. Catal. Today 29: 449-455
  279. Aguado, S.; Coronas, J.; Santamaria, J. 2005. Use of zeolite membrane reactors for the combustion of VOCs present in air at low concentrations. Chem. Eng. Res. Design, 83(A3): 295-301
  280. Hinh, V.V.; Jamal, B.; Aissa, O-D.; Bechara, T. 2009. Removal of hazardous chlorinated VOCs over Mn-Cu mixed oxide based catalyst. J. Hazard Mater. 169: 758-765
  281. Zavyalova, U.; Nigrovski, B.; Pollok, K.; Langenhorst, F.; Mu¨ller, B.; Scholz, P.; Ondruschka, B.; 2008. Gel-combustion synthesis of nanocrystalline spinel catalysts for VOCs elimination. Appl. Catal. B: Environ. 83: 221-228
  282. Cherkezova-Zheleva, Z.; Kolev, H.; Krsti, J.; Dimitrov, D.; Ivanov, K.; Loncarevi, D.; Jovanovi, D.; and Mitov, I.; 2009. Characterization of Double Oxide System Cu-Cr-O Supported on γ-Al2O3. Russian J. Phys. Chem. A 83(9): 1436-1441
  283. Sasidharan, N.S.; Deshingkar, D.S.; and Wattal, P.K. 2005. Report, BARC/2005/E/018 (2005)
  284. Zelenka, P.; Cartellieri, W.; and Herzog, P. 1996. Worldwide diesel emission standards, current experiences and future needs. Appl. Catal. B 10: 3-28
  285. Teraoka, Y.; and Kagawa, S. 1998. Simultaneous catalytic removal of NOx and diesel soot particulates. Catal. Surv. Jpn. 2: 155-164
  286. Shangguan, W.F.; Teraoka, Y.; Kagawa, S. 1996. Simultaneous catalytic removal of NO and diesel soot particulates over ternary ABO, spinel-type oxides. Appl. Catal. B: Env. 8: 217-227
  287. Amin, N.A.S.; Tan, E.F.; Manan, Z.A. 2003. Selective reduction of NOx with C3H6 over Cu and Cr promoted CeO2 catalysts. Appl. Catal. B: Env. 43: 57-69
  288. Orlik. S. N. 2001. Contemporary problems in the selective catalytic reduction of nitrogen oxides (NOx). Theoret. Exper. Chem. 37(3): 135-162
  289. Gonzalez, M. A.; Liney, E.; Piel, W.; Natarajan, M.; Asmas, T.; Naegeli, D. W.; Yost, D.; Frame, E. A.; Clark, W.; Wallace, J. P.; Garback, J. 2001. SAE Paper. No. 01-01-3632
  290. Tailleur, R.G.; and Caris, P.C. 2009. Selective Oxidation of a hydrotreated light catalytic gas oil To produce low-emission diesel fuel. Energy Fuels 23: 799-804
  291. Votsmeier, M.; Kreuzer, T.; Lepperhoff, G. 2005. Automobile Exhaust Control. Automobile Exhaust Control. Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim
  292. Solov‟ev, S. A.; Kurilets, Ya. P.; Orlik, S. N.; Pavlikov, V. N.; and Garmash, E. P. 2003. Oxidation of finely dispersed carbon on coated oxide catalysts. Theoret. Exper. Chem. 39(5): 330-335
  293. Atimtay, A.T. 2001. Cleaner energy production with integrated gasification combined cycle systems and use of metal oxide sorbents for H2S cleanup from coal gas. Clean Prod. Proc. 2: 197-208
  294. Li, H.; 2008. Selective catalytic oxidation of hydrogen sulfide from syngas. M.S. Thesis. University of Pittsburgh
  295. Atimtay, A.T.; Gasper-Galvin L.D.; and Poston J.A.; 1993. Novel supported sorbent for hot gas desulphurization. Environ. Sci. Technol. 27(7): 1295-1303
  296. Gasper-Galvin, L.D.; Atimtay, A.T.; Gupta, R.P. 1998. Zeolite-Supported Metal Oxide Sorbents for Hot-Gas Desulfurization. Ind. Eng. Chem. Res. 37: 4157-4166
  297. Flytzani-Stephanopoulos, M.; Sakbodin, M.; Wang, Z;. 2006 Regenerative adsorption and removal of H2S from hot fuel gas streams by rare earth oxides. Sci. 312: 1508-1510
  298. Ham, V. D.; Heesink, A.G.J.; Prins, A.B.M.; Swaaij, W.V.; W.P.M., 1996. Proposal for a regenerative high temperature process for coal gas cleanup with calcined limestone. Ind. Eng. Chem. Res. 35(5): 1487-1495
  299. Cheah, S.; Carpenter, D.L.; and Magrini-Bair, K.A. 2009. Review of Mid- to High-Temperature Sulfur Sorbents for Desulfurization of Biomass and Coal-derived Syngas. Energy Fuels 23: 5291-5307
  300. Abbasian, J.; and Slimane, R.B. 1998. A regenerable copper-based sorbent for H2S removal from coal gases. Ind. Eng. Chem. Res. 37: 2775-2782
  301. Jadhav, R.A. 2006. Development and Evaluation of Nanoscale Sorbents for Mercury Capture from Warm Fuel Gas. Official Monitor of Republic Moldova, 2002, No. 59-61: 19-26
  302. Ding, Z-Y.; Aki, S.N.V.K.; Abraham, M.A. 1995. Catalytic Supercritical Water Oxidation: Phenol Conversion and Product Selectivity. Environ. Sci. Technol.29 (11): 2748-2753
  303. Santos, A.; Yustos, P.; Quintanilla, A.; Garcia-Ochoa, F.; 2005. Kinetic model of wet oxidation of phenol at basic pH using a copper catalyst. Chem. Eng. Sci. 60: 4866 - 4878
  304. Akyurtlu, J.F.; Akyurtlu, A.; Kovenklioglu, S. 1998. Catalytic oxidation of phenol in aqueous solutions. Catal. Today 40: 343-352
  305. Wöllner, A.; Lange, F.; Schmelz, H.; Knözinger, H. 1993. Characterization of mixed copper-manganese oxides supported on titania catalysts for selective oxidation of ammonia. Appl. Catal. A: Gen. 94: 181-203
  306. Gang, L. 2002. Catalytic Oxidation of Ammonia to Nitrogen. Ph.D Thesis. Schuit Institute of Catalysis, Laboratory of Inorganic Chemistry and Catalysis, Eindhoven University of Technology, The Netherlands
  307. Huang, T.L.; Macinnes, J.M.; and Cliffe, K.R. 2001. Nitrogen Removal from Wastewater by a Catalytic Oxidation Method. Water Res. 35(9): 2113-2120
  308. Hung, C-M. 2007. Wet air oxidation of aqueous ammonia solution. catalyzed by bimetallic pt/rh nanoparticle Catalysts. J. Chinese Institute of Eng. 30(6): 977-981
  309. Martin, A.; Luck, F.; Armbruster, U.; Patria, L.; Radnik, J.; Schneider, M. 2005. Ammonia removal from effluent streams of wet oxidation under high pressure. Top Catal. 33(1-4): 155-169
  310. Samuel, D. F.; & Osman, M.A. 1998. Chemistry of water treatment: 127-196. USA: CRC
  311. Chen, S.; & Cao, G. 2006. Study on the photocatalytic oxidation of NO2- ions using TiO2 beads as a photocatalyst. Desalination 194(1-3): 127-134
  312. Canter, L.W. 1997. Nitrates in Groundwater. CRC Press, Boca Raton, FL
  313. Ketir, W.; Bouguelia, A.; Trari, M. 2009. Visible Light Induced NO2- Removal over CuCrO2 Catalyst. Water Air Soil Pollut. 199: 115-122
  314. Kawamoto, A.M.; Pardini, L.C.; Rezende, L.C.; 2004. Synthesis of copper chromite catalyst. Aerospace Sci. Technol. 8(7): 591- 598
  315. Rajeev, R.; Devi, K. A.; Abraham, A. et al. 1995. Thermal decomposition studies (Part 19): Kinetics and mechanism of thermal decomposition of copper ammonium chromate precursor to copper chromite catalyst and correlation of surface parameters of the catalyst with propellant burning rate. Thermochim. Acta 254(15): 235-247
  316. Patron, L.; Pocol, V.; Carp, O.; 2001. New synthetic route in obtaining copper chromite(I): Hydrolysis of some soluble salts. Mater. Res. Bull. 36(7/8): 1269-1276
  317. Armstrong, R.W.; Baschung, B.; Booth, D.W.; 2003. Enhanced propellant combustion with nanoparticles. Nano Lett. 3: 253-255
  318. Tagliaferro, F.S.; Fernandes, E.A.N.; Bacchi, M.A.; Campos, E.A.; Dutra, R.C.L.; Diniz, M.F. 2006. INAA for the validation of chromium and copper determination in copper chromite by infrared spectrometry. J. Radioanal. Nucl. Chem. 269: 403-406
  319. Patil, P. R.; Krishnamurthy, V.N.; Joshi, S.S. 2008. Effect of nano-copper oxide and copper chromite on the thermal decomposition of ammonium perchlorate. propellants, explosives. Pyrotechnics. 33(4): 266-270
  320. Bartolomeo, E.D.; Traversa, E.; Baroncini, M.; Kotzeva, V.; Kumar, R.V. 2000. Solid state ceramic gas sensors based on interfacing ionic conductors with semiconducting oxides. J. Eur. Ceram. Soc. 20: 2691-2699
  321. Xiong, W.; Kale, G.M. 2005. Novel high-selectivity NO2 sensor for sensing lowlevel NO2. Electrochem. Solid-State Lett. 8: H49-H53
  322. Xiong, W.; Kale, G.M. 2006. Novel high-selectivity NO2 sensor incorporating mixed-oxide electrode. Sens. Actuators B 114: 101-108
  323. Okuda, T.; Jufuku, N.; Hidaka, S.; Terada, N. 2005. Magnetic, transport, and thermoelectric properties of the delafossite oxides CuCr 1−x MgxO2 (0≤ x ≤). Phys. Rev. B 72(14): 144403(5)
  324. Dubey, B. L.; Nath, N.; Tripathi, A. 1985. Electrical transport in Nil-xCuxCr2O4, (0 ≤ x ≤ 1) chromite Catalysts. J. Mat. Sci. Lett. 4: 87-90
  325. Collin, G.; Höke, H. 1989. B. Elvers, S. Hawkins, M. Ravenscroft, G. Schulz (Eds.), Ullman’s Encyclopedia of Industrial Chemistry A14, VCH, Weinheim.167
  326. Collin, G.; Höke, H. 1993. B. Elvers, S. Hawkins, W. Russey, G. Schulz (Eds.), Ullman’s Encyclopedia of Industrial Chemistry 22A, VCH, Weinheim. 465
  327. Pozharskii, A.F.; Soldatenkov, A.T.; Katritzky, A.R. 1997. Heterocycles in Life and Society, Wiley, New York,
  328. Szajewski, J. 2009.Warsaw Poison Control Centre (August, 1991). Propylene glycol (PIM 443). IPCS INChem. http://www.inchem.org/documents/pims/ chemical/pim443.htm
  329. Campanati, M.; Vaccari, A.; Piccolo, O. 2000. Environment-friendly synthesis of nitrogen-containing heterocyclic compounds. Catal. Today 60: 289-295
  330. Harrison, P.H.; Allison, F.J.; and Daniell, W. 2002. Effect of Preparation Route and Thermal Treatment on the Nature of Copper and Chromium Doubly Promoted Ceria Catalysts. Chem. Mater. 14: 499-507
  331. [332] Menon, P. G.; and Delmon, B.; 1997. Handbook of Heterogeneous Catalysis G. Ertl, H. Knözinger and J. Weitkamp, Eds., Vol. I, Wiley-VCH, Weinheim. Section 2.1.6, 100-118
  332. Delmon, B. 2007. Preparation of heterogeneous catalysts. Synthesis of highly dispersed solids and their reactivity. J. Therm Anal. Calorim. 90(1): 49-65
  333. Ivanov, K.; Dimitrov, D.; and Boyanov, B. 2011. Deactivation of Cu - Cr/γ-alumina Catalysts for Combustion of Exhaust Gases. World Acad. Sci., Eng. and Technol. 73: 319-325
  334. Rao, C.N.R.; Nagarajan, R.; and Vijayaraghavan, R. 1993. Supercond. Sci. Tecbnol. 6: 1
  335. Arboleda, J.; Echavarria, A.; and Palacio, L.A. 2009, Synthesis and characterization of (NH4)1.5Cu2Cr2O8(OH)1.5·H2O. Powder Diffr. 24(3): 244-246
  336. Venugopal, A.; Palgunadi, J.; Deog, J-K.; Joo, Chae-Ho Shin. 2009. Hydrotalcite derived Cu-Zn-Cr catalysts admixed with g-Al2O3 for single step dimethyl ether synthesis from syngas: Influence of hydrothermal treatment. Catal. Today 147: 94-99
  337. Weidenkaff, A. 2004. Preparation and application of nanostructured perovskite phases. Adv. Eng. Mater. 6: 709-714
  338. Schu¨th, F. 2003. Endo- and Exotemplating to create high surface area inorganic materials. Angew. Chem. Int. Ed. 42: 3604-3622
  339. Fuertes, A.B. 2005. Synthesis of Nanocrystalline Zirconia Using Sol-Gel and Precipitation Techniques. J. Phys. Chem. Sol. 66: 741-747
  340. Schwickardi, M.; Johann, T.; Schmidt, W.; and Schuth, F. 2002. High-surface-area oxides obtained by an activated carbon route. Chem. Mater. 14(9): 3913-3919
  341. Capek, I. 2004. Preparation of metal nanoparticles in water-in-oil (w/o) microemulsions. Adv. Colloid Interface. 110: 49-74
  342. Kumar, A.; Yusuf, S.M.; and Yakhmi, J.V. 2010. Synthesis and magnetic properties of PVP coated copperchromium hexacyanide nanoparticles. J Phys: Conf. Series 200: 072057
  343. Patil, K.C.; Aruna, ST; Ekambaram, S. 1998. Combustion synthesis. Combust. Sci. Technol. 138: 279-85
  344. Patil, KC; Aruna, ST. In: Borisov AA, De Luca LT, Merzhanov AG, Scheck YN, editors. Redox methods in SHS practice in self-prop-agating high temperature synthesis of materials. New York: Taylor & Francis; 2002. Collection of 17 articles by experts in the area reflecting the trends in SHS covering theory and practice of combustion, material synthesis and applications
  345. Patil, K.C.; Aruna, S.T.; Mimani, T. 2002. Combustion synthesis: an update. Current Opinion in Sol. State and Mat. Sci. 6: 507-512.s
  346. Xanthopoulou, G.; Vekinis, G. 2001. An overview of some environmental applications of self-propagating high-temperature synthesis. Adv. Environ. Res. 5: 117-128
  347. Xanthopoulou, G.; Vekinis, G. 1998. Investigation of catalytic oxidation of carbon monoxide over a Cu-Cr-oxide catalyst made by self-propagating high-temperature synthesis. Appl. Catal. B 19: 37-44
  348. Russo, N.; Fino, D.; Saracco, G.; Specchia, V. 2005. Studies on the redox properties of chromite perovskite catalysts for soot combustion. J. Catal. 229: 459-469
  349. Perla, S. 2005. Flame synthesis of carbon-nanostructures. A Thesis. B.E., Osmania University
  350. Akhuemonkhan, O.; Pati, R.K.; Hou, S.; and Ehrman, S. Flame Synthesis of Nanostructured Sorbents for Desulfurization in Fuel Cells
  351. Shiau, C.Y.; and Tsai, J. C. 1998 . Cu/SiO2 Catalyst Prepared by Electroless Method. J. Chem. Technol. Biotechnol. 73: 414-420
  352. Yu, J.C.; Zhang, L.Z.; Li, Q. et al. 2003. Sonochemical preparation of nanoporous composites of titanium. Langmuir 19: 7673-7675
  353. Bonrath, W. 2005. Ultrasound supported catalysis. Ultrason. Sonochem 12: 103-106
  354. Bianchi, C.L.; Martini, F.; Ragaini, V. 2001. New ultrasonically prepared Co-based catalysts for Fischer-Tropsch synthesis. Ultrason. Sonochem. 8: 131-135
  355. Sze, S.M. 2008. Semiconductor devices: physics and technology. Wiley India: 384. ISBN 812651681X
  356. Wade, R.C.; Holah, D.G.; Hughes, A.N. and Hui, B.C. 1976. Reduced Nickel and Cobalt Systems. Catal. Rev.Sci. Eng. 14 (2): 211-246
  357. Cauqui, M.A.; and Rodríguez-Izquierdo, J.M. 1992. Application of the sol-gel methods to catalyst preparation. J. Non-Cryst. Solids 147-148: 724-738
  358. Brinker, C.J.; G.W. Scherer (1990). Sol-Gel Science: The Phys Chem Sol-Gel Proces. Academic Press. ISBN 0121349705
  359. Kakihana, M. 1996. Invited Review “Sol-Gel” Preparation of high temperature superconducting oxides. J. Sol-Gel Sci. Technol. 6: 7-55
  360. Pechini M P. 1967. Method of preparing lead and alkaline earth titanates and niobates and coating same to form a capacitor. US Patent. 3330697, 1967
  361. Lessing PA Mixed-cation powders via polymeric precursors. Amer. Soc. Ceramic Bulletin. 1989; 68(5):1002-1007
  362. Pimentel, P.M.; Martinelli, A.E.; de Araújo Melo, D.M.; Pedrosa, A.M.G.; Cunha, J.D.; da Silva Júnior, C. N. 2005. Pechini Synthesis and Microstructure of Nickel-Doped Copper Chromites. Mater. Res. 8(2): 221-224
  363. Zhang, L. 2004. Preparation of multi-component ceramic nanoparticles. Center for Industrial Sensors and MeasurementsDepartment Materials Science & Engineering Group Inorganic Materials Science. www.mse.eng.ohio-state.edu/fac_staff/faculty/ verweij/
  364. Mitchell, M.B.D.; Ackson, J.D.; and James, P.F. 1998. Preparation and characterization of forsterite (Mg2SiO4) xerogels. J. Sol-Gel Sci. Techn. 13: 359-364
  365. Amada, N.; Yoshinaga, I.; Katayama, S. 2000. J. Sol-Gel Sci. Techn. 17: 123
  366. Meyer, F.; Hempelmann, R.; Mathur, S.; and Veith, M. 1999. Microemulsion mediated sol-gel synthesis of nano-scaled MAl2O4 (M=Co, Ni, Cu) spinels from single-source heterobimetallic alkoxide precursors. J. Mater. Chem. 9: 1755-1763
  367. Andrianainarivelo, M.; Corriu, R.J.P.; Leclercq, D.; Mutin, P.H.; and Vioux, A. 1997. Nonhydrolytic Sol−Gel Process: Aluminum Titanate Gels. Chem. Mater. 9: 1098-1102
  368. Ma, Z.; Xiao, Z.; A. J.; Bokhoven, V.; Liang, C. 2010. A non-alkoxide sol-gel route to highly active and selective Cu-Cr catalysts for glycerol conversion. J. Mater. Chem. 20: 755-76

Last update:

No citation recorded.

Last update:

No citation recorded.