1Chemical Engineering Department, Chemical Engineering Department, University of Technology-Iraq, Baghdad, Iraq
2Biochemical Engineering Department, Al-Khwarizmi College of Engineering, University of Baghdad, Baghdad, Iraq
3Department of Chemical Engineering, University of Science and Technology, the University of Danang, 54 Nguyen Luong Bang st, Danang, 550000, Viet Nam
BibTex Citation Data :
@article{BCREC18320, author = {Nabil Majd Alawi and Hassan H. Al-Mohammedawi and Firas Khaleel AL-Zuhairi and Hoang Minh Nguyen and Jamal M. Ali}, title = {Optimization of Discharge Plasma Reactor for Dry Reforming of Methane using Response Surface Methodology}, journal = {Bulletin of Chemical Reaction Engineering & Catalysis}, volume = {18}, number = {2}, year = {2023}, keywords = {Design of Experiments; Response Surface Methodology; CO2 reforming of methane optimization; Dielectric Barrier Discharge Plasma; Syngas production}, abstract = { This research provides a study of the dry reforming of methane (DRM), which converts two main greenhouses gases (CO 2 and CH 4 ) to synthesis gas (H 2 and CO) by a Dielectric Barrier Discharge (DBD) plasma reactor at atmospheric pressure. The Box-Behnken Design (BBD) method based on the Response Surface Methodology (RSM) was applied to determine the optimum experimental conditions on the plasma stability and the synthesis gas production. The synergistic effects of input power (P), CO 2 /CH 4 ratio (R), and flow rate (FR) on the CO 2 , CH 4 conversions, H 2 , CO yields, and the syngas ratio of H 2 to CO were studied. With the desirability value of 0.97, the optimum values of 10.05 W (P), 1.03 (R), and 1.58 L.min − 1 FR were identified with CO 2 conversion of 48.56% and CH 4 conversion of 86.67%; H 2 and CO yields of 45.87% and 39.43% respectively; and syngas ratio of H 2 to CO of 0.88. The study shows that both P and FR have a major significant effect on the reactant conversions and syngas ratio, followed by R. Meanwhile, the value of R has a significant impact on the H 2 , CO yields followed P and FR. In contrast, the synergistic effects between P-R, P-FR, and R-FR had a weak significant on the CO 2 and CH 4 conversions, H 2 and CO yields, and H 2 to CO ratio respectively. The quadratic term coefficients of P, R, and FR had a remarkable effect on all responses. Thus, the synergistic effect of the most important parameters improves the process efficiency. Copyright © 2023 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License ( https://creativecommons.org/licenses/by-sa/4.0 ). }, issn = {1978-2993}, pages = {303--314} doi = {10.9767/bcrec.18320}, url = {https://journal.bcrec.id/index.php/bcrec/article/view/18320} }
Refworks Citation Data :
This research provides a study of the dry reforming of methane (DRM), which converts two main greenhouses gases (CO2 and CH4) to synthesis gas (H2 and CO) by a Dielectric Barrier Discharge (DBD) plasma reactor at atmospheric pressure. The Box-Behnken Design (BBD) method based on the Response Surface Methodology (RSM) was applied to determine the optimum experimental conditions on the plasma stability and the synthesis gas production. The synergistic effects of input power (P), CO2/CH4 ratio (R), and flow rate (FR) on the CO2, CH4 conversions, H2, CO yields, and the syngas ratio of H2 to CO were studied. With the desirability value of 0.97, the optimum values of 10.05 W (P), 1.03 (R), and 1.58 L.min−1 FR were identified with CO2 conversion of 48.56% and CH4 conversion of 86.67%; H2 and CO yields of 45.87% and 39.43% respectively; and syngas ratio of H2 to CO of 0.88. The study shows that both P and FR have a major significant effect on the reactant conversions and syngas ratio, followed by R. Meanwhile, the value of R has a significant impact on the H2, CO yields followed P and FR. In contrast, the synergistic effects between P-R, P-FR, and R-FR had a weak significant on the CO2 and CH4 conversions, H2 and CO yields, and H2 to CO ratio respectively. The quadratic term coefficients of P, R, and FR had a remarkable effect on all responses. Thus, the synergistic effect of the most important parameters improves the process efficiency. Copyright © 2023 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
Article Metrics:
Last update:
In order for Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group to publish and disseminate research articles, we need non-exclusive publishing rights (transfered from author(s) to publisher). This is determined by a publishing agreement between the Author(s) and Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group. This agreement deals with the transfer or license of the copyright of publishing to Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group, while Authors still retain significant rights to use and share their own published articles. Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group supports the need for authors to share, disseminate and maximize the impact of their research and these rights, in any databases.
As a journal Author, you have rights for a large range of uses of your article, including use by your employing institute or company. These Author rights can be exercised without the need to obtain specific permission. Authors publishing in BCREC journals have wide rights to use their works for teaching and scholarly purposes without needing to seek permission, including:
Authors/Readers/Third Parties can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, even commercially, but they must give appropriate credit (the name of the creator and attribution parties (authors detail information), a copyright notice, an open access license notice, a disclaimer notice, and a link to the material), provide a link to the license, and indicate if changes were made (Publisher indicates the modification of the material (if any) and retain an indication of previous modifications using a CrossMark Policy and information about Erratum-Corrigendum notification).
Authors/Readers/Third Parties can read, print and download, redistribute or republish the article (e.g. display in a repository), translate the article, download for text and data mining purposes, reuse portions or extracts from the article in other works, sell or re-use for commercial purposes, remix, transform, or build upon the material, they must distribute their contributions under the same license as the original Creative Commons Attribution-ShareAlike (CC BY-SA).
The Authors submitting a manuscript do so on the understanding that if accepted for publication, non-exclusive right for publishing (publishing right) of the article shall be assigned/transferred to Publisher of Bulletin of Chemical Reaction Engineering & Catalysis journal (Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group).
Upon acceptance of an article, authors will be asked to complete a 'Copyright Transfer Agreement for Publishing (CTAP)'. An e-mail will be sent to the Corresponding Author confirming receipt of the manuscript together with a 'Copyright Transfer Agreement for Publishing' form by online version of this agreement.
Bulletin of Chemical Reaction Engineering & Catalysis journal and Masyarakat Katalis Indonesia-Indonesian Catalyst Society (MKICS), the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in the Bulletin of Chemical Reaction Engineering & Catalysis are sole and exclusive responsibility of their respective authors and advertisers.
Remember, even though we ask for a transfer of copyright for publishing (CTAP), our journal Author(s) retain (or are granted back) significant scholarly rights as mentioned before.
The Copyright Transfer Agreement for Publishing (CTAP) Form can be downloaded here: [Copyright Transfer Agreement for Publishing (CTAP) Form BCREC 2024]
The copyright form should be signed electronically and send to the Editorial Office in the form of original e-mail below: Prof. Dr. I. Istadi (Editor-in-Chief)Editorial Office of Bulletin of Chemical Reaction Engineering & CatalysisLaboratory of Plasma-Catalysis (R3.5), UPT Laboratorium Terpadu, Universitas DiponegoroJl. Prof. Soedarto, Semarang, Central Java, Indonesia 50275Telp/Whatsapp: +62-81-316426342E-mail: bcrec[at]live.undip.ac.id
(This policy statements has been updated at 24th January 2024)