DOI: https://doi.org/10.9767/bcrec.11.1.393.1-9

Selective Hydrogenation of Biomass-derived Furfural over Supported Ni3Sn2 Alloy: Role of Supports

1Department of Chemistry, Lambung Mangkurat University, Banjarbaru, South Kalimantan, 70713, Indonesia

2Department of Chemical Engineering, Tanjung Pura University, Pontianak, West Kalimantan, Indonesia

3Graduate School of Engineering, Chiba University, 1-33 Yayoi, Inage, Chiba 263-8522, Japan

Received: 10 Nov 2015; Revised: 31 Dec 2015; Accepted: 5 Jan 2016; Available online: 10 Mar 2016; Published: 1 Apr 2016.
Editor(s): Istadi Istadi
Open Access Copyright (c) 2016 by Authors, Published by BCREC Group under http://creativecommons.org/licenses/by-sa/4.0.
Fulltext View|Download

Citation Format:
Cover Image
Abstract

A highly active and selective hydrogenation of biomass-derived furfural into furfuryl alcohol was achieved using supported single phase Ni3Sn2 alloy catalysts. Various supports such as active carbon (AC), g-Al2O3, Al(OH)3, ZnO, TiO2, ZrO2, MgO, Li-TN, and SiO2 have been employed in order to understand the role of the support on the formation of Ni3Sn2 alloy phase and its catalytic performance. Supported Ni3Sn2 alloy catalysts were synthesised via a simple hydrothermal treatment of the mixture of aqueous solution of nickel chloride hexahydrate and ethanol solution of tin(II) chloride dihydrate in presence of ethylene glycol at 423 K for 24 h followed by H2 treatment at 673 K for 1.5 h, then characterised by using ICP-AES, XRD, H2- and N2-adsorption. XRD profiles of samples showed that the Ni3Sn2 alloy phases are readily formed during hydrothermal processes and become clearly observed at 2θ = 43-44o after H2 treatment. The presence of Ni3Sn2 alloy species that dispersed on the supports is believed to play a key role in highly active and selective hydrogenation of biomass-derived furfural towards furfuryl alcohol. Ni3Sn2 on TiO2 and ZnO supports exhibited much lower reaction temperature to achieved >99% yield of furfuryl alcohol product compared with other supports. The effects of loading amount of Ni-Sn, reaction conditions (temperature and time profile) on the activity and selectivity towards the desired product are systematically discussed. 

Keywords: selective hydrogenation; furfural; furfuryl alcohol; supported Ni3Sn2 alloy catalysts

Article Metrics:

Article Info
Section: The 2nd International Conference on Chemical and Material Engineering 2015
Recent articles
Preparation and Characterization of Anadara Granosa Shells and CaCO3 as Heterogeneous Catalyst for Biodiesel Production Kinetic Study on the SO2 Adsorption using CuO/γ-Al2O3 Adsorbent Selective Hydrogenation of Biomass-derived Furfural over Supported Ni3Sn2 Alloy: Role of Supports The Catalytic Degradation Performance of α-FeOOH Doped with Silicon on Methyl Orange Analysis of Chemical Reaction Kinetics Behavior of Nitrogen Oxide During Air-staged Combustion in Pulverized Boiler Controlled Synthesis of Silver Nanoparticles Using Double Reductants and Its Voltammetric Characteristics Study Preface, BCREC Vol. 11 No. 1 Year 2016 Front-matter Back-matter More recent articles
  1. Falbe, J., Bahrmann, H., Lipps, W., Meyer, D. in Ullmanns encyclopedia of industrial chemistry, Wiley-VCH Verlag GmbH & Co. 2005. Vol. 11, pp. 21
  2. Frainier, L.J., Fineberg, H. (1981). Preparation of furfuryl alcohol from furfural. US Patent 4,302,397
  3. Rao, R., Dandekar, A., Baker, R.T.K., Vannice, M.A. (1997). Properties of copper chromite catalysts in hydrogenation reactions. J. Catal. 171: 406-419
  4. Luo, H., Li, H., Zhuang, L. (2001). Furfural hydrogenation to furfuryl alcohol over a novel Ni-Co-B amorphous alloy catalyst. Chem. Let. 30(5): 404-405
  5. Li, H., Zhang, S., Luo, H. (2004). A Ce-promoted Ni-B amorphous alloy catalyst (Ni-Ce-B) for liquid-phase furfural hydrogenation to furfural alcohol. Materials Letters. 58: 2741-2746
  6. Li, H., Luo, H., Zhuang, L., Dai, W., Qiao, M. (2003). Liquid phase hydrogenation of furfural to furfuryl alcohol over the Fe-promoted Ni-B amorphous alloy catalysts. J. Mol. Catal. A: Chemical. 203: 267-275
  7. Baijun, L., Lianhai, L., Bingchun, W., Tianxi, C., Iwatani, K. (1998). Liquid phase selective hydrogenation of furfural on Raney nickel modified by impregnation of salts of heteropolyacids. App. Catal. A: General. 171: 117-122
  8. Vetere, V., Merlo, A. B., Ruggera, J. F., Casella, M. L. (2010). Transition metal-based bimetallic catalysts for the chemoselective hydrogenation of furfuraldehyde. J. Braz. Chem. Soc. 21: 914-920
  9. Merlo, A.B., Vetere, V., Ruggera, J. F., Casella, M. L. (2009). Bimetallic PtSn catalyst for the selective hydrogenation of furfural to furfuryl alcohol in liquid-phase. Catal. Commun. 10: 1665-1669
  10. Rodiansono, R., Hara, T., Ichikuni, N., Shimazu, S. (2012). Highly efficient and selective hydrogenation of unsaturated carbonyl compounds using Ni–Sn alloy catalysts. Catal. Sci. Technol. 2: 2139-2145
  11. Rodiansono, R., Hara, T., Ichikuni, N., Shimazu, S. (2014). Development of nanoporous Ni-Sn alloy and application for chemoselective hydrogenation of furfural to furfuryl alcohol. Bull. Chem. React. Eng. & Catal. 9(1): 53-59. DOI: 10.9767/bcrec.9.1.5529.53-59
  12. Rodiansono, R., Hara, T., Ichikuni, N., Shimazu, S. (2012). A novel preparation method of Ni-Sn alloy catalysts supported on aluminium hydroxide: Application to chemoselective hydrogenation of unsaturated carbonyl compounds. Chem. Lett. 41(8): 769-771
  13. Lowell, S., Shields, J. E., Thomas, M. A., Thommes, M. (2004). Characterization of porous solids and powders: surface area, pore size and density, Kluwer Academic Publishers, Netherlands, Chapter 8
  14. Bartholomew, C.H., Pannel, R.B., Butler J.L. (1980). Support and crystallite size effects in CO hydrogenation on nickel. J. Catal. 65: 335-347
  15. Dandekar, A., Vannice, M. A. (1999). Crotonaldehyde hydrogenation on Pt/TiO2 and Ni/TiO2 SMSI catalysts. J. Catal. 183: 344-354
  16. Kijenski, J., Winiarek, P., Paryjczak, T., Lewicki, A., Mikolajska, A. (2002). Platinum deposited on monolayer supports in selective hydrogenation of furfural to furfuryl alcohol. Appl. Catal. A. 233: 171-182
  17. Corma, A., Serna, P., Concepcion, P., Calvino, J. J. (2008). Transforming nonselective into chemoselective metal catalysts for the hydrogenation of substituted nitroaromatics. J. Am. Chem. Soc.130: 8748-8753
  18. Swift, H. E., Bozik, J. E.. (1968). Metallic phases and activities of nickel-tin-silica catalysts: dehydrogenation of cyclohexanone, cyclohexanol, and cyclohexane. J. Catal. 12: 5-14
  19. Delbecq, F., Sautet, P. (1995). Competitive C=C and C=O adsorption of a-b-unsaturated aldehydes on Pt and Pd sur-faces in relation with the selectivity of hydrogenation reactions: A theoretical approach. J. Catal. 152: 217-236
  20. Sitthisa, S., Pham, T., Prasomsri, T., Sooknoi, T., Mallinson, R. G., Resasco, D. E.. (2011). Conversion of furfural and 2-methylpentanal on Pd/SiO2 and Pd-Cu/SiO2 catalysts. J. Catal. 280: 17-27
  21. Sordelli, L., Psaro, R., Vlaic, G., Cepparo, A., Recchia, S., Fusi, A., Zanoni, R.. (1999). EXAFS studies of supported Rh–Sn catalysts for citral hydrogenation. J. Catal. 182: 186-198
  22. Margitfalvi, J. L., Tompos, A., Kolosova, I., Valyon, J. (1998). Reaction induced selectivity improvement in the hydrogenation of crotonaldehyde over Sn-Pt/SiO2 catalysts. J. Catal. 174: 246-249

Last update:

No citation recorded.

Last update:

No citation recorded.