1Department of Chemical Engineering, Institut Teknologi Bandung, Bandung 40132, Indonesia
2PT. Aimtopindo Nuansa Kimia, Bandung, 40212, Indonesia
BibTex Citation Data :
@article{BCREC20885, author = {Mey Shelly Rikin and Tri Partono Adhi and Tjokorde Walmiki Samadhi and Setyo Yanus Sasongko}, title = {Catalytic Valorisation of Water Hyacinth Cellulose through Biomimetic Hydrolysis: Integrating Structural Accessibility and Cooperative Acid Catalysis for Renewable Glucose Production}, journal = {Bulletin of Chemical Reaction Engineering & Catalysis}, volume = {22}, number = {1}, year = {2027}, keywords = {Biomimetic Catalysis; Cellulose Hydrolysis; Renewable Glucose; Transition Metal; Water Hyacinth}, abstract = { The catalytic conversion of lignocellulosic biomass into renewable sugars is a key step toward the development of sustainable bio-based chemicals and biorefineries. In this study, cellulose isolated from water hyacinth ( Eichhornia crassipes ), an abundant invasive aquatic biomass, was valorised through biomimetic hydrolysis using piperazinium dihydrogen sulfate (PDS) under mild reaction conditions. Sequential pretreatment was employed to remove non-cellulosic components and improve cellulose accessibility, resulting in a cellulose-rich material with a crystallinity index of 20.1% and fibril diameters of 5–20 nm. Hydrolysis experiments were conducted at cellulose loadings of 1–3 wt%, PDS concentrations of 0.122–0.244 M, and temperatures ranging from 50 to 90 °C. Transition metal ions (Mn, Cu, Fe, Zn, and Ni; 0.006 M) were incorporated as co-catalysts to investigate cooperative Brønsted–Lewis acid activation. The hydrolysis rate increased with increasing temperature, catalyst concentration, and cellulose accessibility, yielding apparent rate constants of 0.0010–0.0346 mmol.L⁻¹.min⁻¹. Kinetic analysis revealed fractional reaction orders of 0.80 with respect to cellulose concentration and 0.75 with respect to proton concentration, with activation energies ranging from 65 to 74 kJ.mol⁻¹ for the PDS only system. Fe- and Cu-assisted systems exhibited enhanced glucose formation, highlighting the importance of cooperative catalytic interactions during glycosidic bond cleavage. The results demonstrate that effective biomass valorisation depends on the integration of structural accessibility and catalytic activation, providing mechanistic insights for the development of sustainable routes for converting lignocellulosic biomass into renewable sugars and bio-based chemicals. Copyright © 2027 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License ( https://creativecommons.org/licenses/by-sa/4.0 ). }, issn = {1978-2993}, pages = {134--147} doi = {10.9767/bcrec.20885}, url = {https://journal.bcrec.id/index.php/bcrec/article/view/20885} }
Refworks Citation Data :
The catalytic conversion of lignocellulosic biomass into renewable sugars is a key step toward the development of sustainable bio-based chemicals and biorefineries. In this study, cellulose isolated from water hyacinth (Eichhornia crassipes), an abundant invasive aquatic biomass, was valorised through biomimetic hydrolysis using piperazinium dihydrogen sulfate (PDS) under mild reaction conditions. Sequential pretreatment was employed to remove non-cellulosic components and improve cellulose accessibility, resulting in a cellulose-rich material with a crystallinity index of 20.1% and fibril diameters of 5–20 nm. Hydrolysis experiments were conducted at cellulose loadings of 1–3 wt%, PDS concentrations of 0.122–0.244 M, and temperatures ranging from 50 to 90 °C. Transition metal ions (Mn, Cu, Fe, Zn, and Ni; 0.006 M) were incorporated as co-catalysts to investigate cooperative Brønsted–Lewis acid activation. The hydrolysis rate increased with increasing temperature, catalyst concentration, and cellulose accessibility, yielding apparent rate constants of 0.0010–0.0346 mmol.L⁻¹.min⁻¹. Kinetic analysis revealed fractional reaction orders of 0.80 with respect to cellulose concentration and 0.75 with respect to proton concentration, with activation energies ranging from 65 to 74 kJ.mol⁻¹ for the PDS only system. Fe- and Cu-assisted systems exhibited enhanced glucose formation, highlighting the importance of cooperative catalytic interactions during glycosidic bond cleavage. The results demonstrate that effective biomass valorisation depends on the integration of structural accessibility and catalytic activation, providing mechanistic insights for the development of sustainable routes for converting lignocellulosic biomass into renewable sugars and bio-based chemicals. Copyright © 2027 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
Article Metrics:
Last update:
In order for Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group to publish and disseminate research articles, we need non-exclusive publishing rights (transfered from author(s) to publisher). This is determined by a publishing agreement between the Author(s) and Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group. This agreement deals with the transfer or license of the right for publishing to Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group, while Authors still retain significant all copy rights to use and share their own published articles. Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group supports the need for authors to share, disseminate and maximize the impact of their research and these rights, in any databases.
As a journal Author, you have all copy rights for a large range of uses of your article, including use by your employing institute or company. These Author copy rights can be exercised without the need to obtain specific permission. Authors who publishing in BCREC journals have wide copy rights to use their works for teaching and scholarly purposes without needing to seek permission, including, but not limited to:
Authors/Readers/Third Parties can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, even commercially, but they must give appropriate credit (the name of the creator and attribution parties (authors detail information), a copyright notice, an open access license notice, a disclaimer notice, and a link to the material), provide a link to the license, and indicate if changes were made (Publisher indicates the modification of the material (if any) and retain an indication of previous modifications using a CrossMark Policy and information about Erratum-Corrigendum notification).
Authors/Readers/Third Parties can read, print and download, redistribute or republish the article (e.g. display in a repository), translate the article, download for text and data mining purposes, reuse portions or extracts from the article in other works, sell or re-use for commercial purposes, remix, transform, or build upon the material, they must distribute their contributions under the same license as the original Creative Commons Attribution-ShareAlike (CC BY-SA).
The Authors submitting a manuscript do so on the understanding that if accepted for publication, non-exclusive right for publishing (publishing right) of the article shall be assigned/transferred to Publisher of Bulletin of Chemical Reaction Engineering & Catalysis journal (Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group).
Upon acceptance of an article, authors will be asked to complete a 'Right Transfer Agreement for Publishing (RTAP)'. An e-mail will be sent to the Corresponding Author confirming receipt of the manuscript together with a 'Right Transfer Agreement for Publishing' form by online version of this agreement.
Bulletin of Chemical Reaction Engineering & Catalysis journal and Masyarakat Katalis Indonesia-Indonesian Catalyst Society (MKICS), the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in the Bulletin of Chemical Reaction Engineering & Catalysis are sole and exclusive responsibility of their respective authors and advertisers.
Remember, even though we ask for a transfer of right for publishing (RTAP), our journal Author(s) still retain (or are granted back) significant scholarly copy rights as mentioned before.
The Right Transfer Agreement for Publishing (RTAP) Form can be downloaded here: [Right Transfer Agreement for Publishing (RTAP) Form BCREC 2025]
The copyright form should be signed electronically and send to the Editorial Office in the form of original e-mail below: Prof. Dr. I. Istadi (Editor-in-Chief)Editorial Office of Bulletin of Chemical Reaction Engineering & CatalysisLaboratory of Plasma-Catalysis (R3.5), UPT Laboratorium Terpadu, Universitas DiponegoroJl. Prof. Soedarto, Semarang, Central Java, Indonesia 50275Telp/Whatsapp: +62-81-316426342E-mail: bcrec[at]live.undip.ac.id ; bcrec[at]che.undip.ac.id
(This policy statements has been updated at 24th January 2024)