1Department of Chemical Engineering, Baku Engineering University, Absheron, Azerbaijan
2Department of Physical and Colloid Chemistry, Baku State University, Baku AZ 1148, Azerbaijan
3Department of Petrochemical Technology and Industrial Ecology, Azerbaijan State Oil and Industry University, Baku, Azerbaijan
4 Baku Branch of Moscow State University, Baku AZ1144, Azerbaijan
BibTex Citation Data :
@article{BCREC20771, author = {Turana Allaz Babayeva and Khanimbaji Mahmud Mammadova and Ayten Zakir Mamedova and Aynur Abulfat Iskenderova and Elmir M. Babayev and Eyyub Sabit Mammadov and Nargiz Firudin Akhmedova and Sabit Eyyub Mamedov}, title = {The Effect of Zinc Modification and Heat Treatment on the Catalytic Properties of Zn/HZSM-5 in the Conversion of Bioethanol to Hydrocarbons}, journal = {Bulletin of Chemical Reaction Engineering & Catalysis}, volume = {22}, number = {1}, year = {2027}, keywords = {HZSM-5; bioethanol; heat treatment; hydrocarbons; selectivity; zinc}, abstract = { The effect of zinc concentration in HZSM-5 zeolite and high-temperature treatment on its catalytic properties in the conversion of bioethanol to hydrocarbons was investigated. The catalysts were characterised using XRF, Fourier-transform infrared spectroscopy, NH 3 -TPD and physical low-temperature N 2 adsorption-desorption. It was found that the zinc concentration and the calcination temperature of the zeolite strongly influence the distribution of products obtained from bioethanol. In the temperature range 300–350 °C, Zn-containing zeolites exhibit high isomerisation activity. The 3% Zn/HZSM-5 catalyst exhibits the highest isomerisation activity, with an iso-C 5 –C 14 yield of 19.8–21.8 %. In the temperature range of 400–450 °C, Zn-containing samples exhibit high aromatisation activity. The highest yield of benzene-toluene-xylene (BTX) is achieved on the 3% Zn/HZSM-5 catalyst at 400 °C and amounts to 21.9 %. High-temperature treatment (650–750 °C) of the 3 % Zn/HZSM-5 catalyst significantly reduces its isomerisation and aromatisation activity, but leads to a significant increase in the yield of C 2 –C 4 olefins (71.2 %). It has been established that the reason for the increased isomerization activity of the catalysts at low temperatures (300 °C–350 °C) is a significant reduction in the density of strong acid sites, the formation of new types of Lewis cation sites and Zn d+ -O - acid pairs, which confer a bifunctional character on the zeolite. The observed high yield of C 2 –C 4 olefins and the increased stability of the Zn-containing catalyst heat-treated at 750 °C are evidently associated with the deactivation of strong acid sites, a reduction in the hydrogen transfer rate, and an increase in its mesoporosity. Copyright © 2027 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License ( https://creativecommons.org/licenses/by-sa/4.0 ). }, issn = {1978-2993}, pages = {109--118} doi = {10.9767/bcrec.20771}, url = {https://journal.bcrec.id/index.php/bcrec/article/view/20771} }
Refworks Citation Data :
The effect of zinc concentration in HZSM-5 zeolite and high-temperature treatment on its catalytic properties in the conversion of bioethanol to hydrocarbons was investigated. The catalysts were characterised using XRF, Fourier-transform infrared spectroscopy, NH3-TPD and physical low-temperature N2 adsorption-desorption. It was found that the zinc concentration and the calcination temperature of the zeolite strongly influence the distribution of products obtained from bioethanol. In the temperature range 300–350 °C, Zn-containing zeolites exhibit high isomerisation activity. The 3% Zn/HZSM-5 catalyst exhibits the highest isomerisation activity, with an iso-C5–C14 yield of 19.8–21.8 %. In the temperature range of 400–450 °C, Zn-containing samples exhibit high aromatisation activity. The highest yield of benzene-toluene-xylene (BTX) is achieved on the 3% Zn/HZSM-5 catalyst at 400 °C and amounts to 21.9 %. High-temperature treatment (650–750 °C) of the 3 % Zn/HZSM-5 catalyst significantly reduces its isomerisation and aromatisation activity, but leads to a significant increase in the yield of C2–C4 olefins (71.2 %). It has been established that the reason for the increased isomerization activity of the catalysts at low temperatures (300 °C–350 °C) is a significant reduction in the density of strong acid sites, the formation of new types of Lewis cation sites and Znd+-O-acid pairs, which confer a bifunctional character on the zeolite. The observed high yield of C2–C4 olefins and the increased stability of the Zn-containing catalyst heat-treated at 750 °C are evidently associated with the deactivation of strong acid sites, a reduction in the hydrogen transfer rate, and an increase in its mesoporosity. Copyright © 2027 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
Article Metrics:
Last update:
In order for Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group to publish and disseminate research articles, we need non-exclusive publishing rights (transfered from author(s) to publisher). This is determined by a publishing agreement between the Author(s) and Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group. This agreement deals with the transfer or license of the right for publishing to Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group, while Authors still retain significant all copy rights to use and share their own published articles. Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group supports the need for authors to share, disseminate and maximize the impact of their research and these rights, in any databases.
As a journal Author, you have all copy rights for a large range of uses of your article, including use by your employing institute or company. These Author copy rights can be exercised without the need to obtain specific permission. Authors who publishing in BCREC journals have wide copy rights to use their works for teaching and scholarly purposes without needing to seek permission, including, but not limited to:
Authors/Readers/Third Parties can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, even commercially, but they must give appropriate credit (the name of the creator and attribution parties (authors detail information), a copyright notice, an open access license notice, a disclaimer notice, and a link to the material), provide a link to the license, and indicate if changes were made (Publisher indicates the modification of the material (if any) and retain an indication of previous modifications using a CrossMark Policy and information about Erratum-Corrigendum notification).
Authors/Readers/Third Parties can read, print and download, redistribute or republish the article (e.g. display in a repository), translate the article, download for text and data mining purposes, reuse portions or extracts from the article in other works, sell or re-use for commercial purposes, remix, transform, or build upon the material, they must distribute their contributions under the same license as the original Creative Commons Attribution-ShareAlike (CC BY-SA).
The Authors submitting a manuscript do so on the understanding that if accepted for publication, non-exclusive right for publishing (publishing right) of the article shall be assigned/transferred to Publisher of Bulletin of Chemical Reaction Engineering & Catalysis journal (Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) and BCREC Publishing Group).
Upon acceptance of an article, authors will be asked to complete a 'Right Transfer Agreement for Publishing (RTAP)'. An e-mail will be sent to the Corresponding Author confirming receipt of the manuscript together with a 'Right Transfer Agreement for Publishing' form by online version of this agreement.
Bulletin of Chemical Reaction Engineering & Catalysis journal and Masyarakat Katalis Indonesia-Indonesian Catalyst Society (MKICS), the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in the Bulletin of Chemical Reaction Engineering & Catalysis are sole and exclusive responsibility of their respective authors and advertisers.
Remember, even though we ask for a transfer of right for publishing (RTAP), our journal Author(s) still retain (or are granted back) significant scholarly copy rights as mentioned before.
The Right Transfer Agreement for Publishing (RTAP) Form can be downloaded here: [Right Transfer Agreement for Publishing (RTAP) Form BCREC 2025]
The copyright form should be signed electronically and send to the Editorial Office in the form of original e-mail below: Prof. Dr. I. Istadi (Editor-in-Chief)Editorial Office of Bulletin of Chemical Reaction Engineering & CatalysisLaboratory of Plasma-Catalysis (R3.5), UPT Laboratorium Terpadu, Universitas DiponegoroJl. Prof. Soedarto, Semarang, Central Java, Indonesia 50275Telp/Whatsapp: +62-81-316426342E-mail: bcrec[at]live.undip.ac.id ; bcrec[at]che.undip.ac.id
(This policy statements has been updated at 24th January 2024)